Buckets and attachments for the Hidromek HMK 62 SS
Weight Class: Mini (1–6 t) Operating Weight: 3,976 kg
- Bucket line
- GP - general purpose digging bucket 300–400 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the HMK 62 SS
Families to look at first
- GP - general purpose digging bucket 300–400 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 1,000–1,200 mm
Quick coupler brackets at this weight
- S30
- S40
- MS01
- MS03
- CW00
- CW05
- CW10
- OQ40
- HS02
- HS03
- HS06
- Klac C
- Klac D
- Klac E
- M02
- M03
- M10
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Which end is the attachment for?
Catalogue sizes for the HMK 62 SS
Each size below has a catalogue row rated for an excavator of about 2.4 t. That is the class whose bucket breakout force matches this backhoe loader. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the HMK 62 SS.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Standard mini-ex buckets set No. 1 | ||||
| GP - general purpose digging bucket Start here Price & lead time Get price & lead time | GP-30 · 2 width variants | 36–53 | 300–400 | 33–40 |
| GBH - hydraulic tilt ditching bucket for mini-excavator Start here Price & lead time Get price & lead time | GBH-30 · 2 width variants | 93–114 | 1,000–1,200 | 101–113 |
Standard mini-ex buckets set No. 2 | ||||
| GPL - general purpose digging bucket | GPL-30 · 2 width variants | 33–48 | 300–400 | 26–31 |
| GBP - rigid grading & ditching bucket, Italian profile | GBP-30 · 2 width variants | 129–158 | 1,000–1,200 | 72–85 |
| GBPH - hydraulic tilting grading & ditching bucket | GBPH-30 · 3 width variants | 88–121 | 900–1,200 | 88–103 |
Dutch mini-ex buckets set No. 3 | ||||
| BDP mini - clay digging bucket for mini-excavator | BDP-30 | 16 | 250 | 30 |
| PDP mini - skeleton BDP stone bucket | PDP-30 · 3 width variants | 93–130 | 600–800 | 53–66 |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| RIP mini - ripper shank for mini-excavator | Ripper-2.5 | 21 | ||
| AC mini - asphalt cutter for mini-excavator | AC-6 | 43 | ||
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.The front end of this backhoe loader
- Front loader bucket Ask us for this end
- Quick coupler Ask us for this end
Before you order: check the interface
The weight class of the Hidromek HMK 62 SS sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A backhoe loader digs at the rear and loads at the front, so the rear bucket is chosen for trenching and the loader bucket for moving material. The rear quick coupler, where the machine has one, sets the bracket every rear attachment needs; the pin and stick checks below still decide the fit.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hidromek HMK 62 SS at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the HMK 62 SS.
Send this answer to a colleague or dealer
Hidromek HMK 62 SS: GP - general purpose digging bucket (GP-30). Shortlisted by operating weight
Sizes are matched to the bucket breakout force of the HMK 62 SS, which is about what a 2.4 t excavator gives.
- Weight Class
- Mini (1–6 t)
- Operating Weight
- 3,976 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hidromek, retrieved 2026-10-07. Source
Hidromek HMK 62 SS: machine data
- Max dig depth
- 3,264 mm maker's document (hidromek.com)
- Max reach
- 4,108 mm maker's document (hidromek.com)
- Max dump height
- 2,778 mm maker's document (hidromek.com)
- Main pump flow
- 60 l/min maker's document (hidromek.com)
- Bucket capacity
- 0.06 m³ maker's document (hidromek.com)
- Lift capacity
- 488 kg maker's document (hidromek.com)
- Quick coupler
- Quick coupler maker's document (hidromek.com)
What the HMK 62 SS figures mean for its attachments
- The main pump delivers up to 60 l/min at 250 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Hidromek lists this quick coupler for it: Quick Coupler. The bracket on every attachment has to match the coupler.
- It digs down to 3,264 mm. That is the deepest trench it can open.
- Its maximum reach is 4,108 mm.
- It dumps at up to 2,778 mm, so a truck or skip side has to sit below that height.
- Hidromek lists a bucket capacity of 0.06 m³.
- At the backhoe end, bucket breakout force is 19.47 kN.
- Hidromek gives a lifting capacity of 488 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its transport length is 3,720 mm.
- Its transport height is 2,308 mm.
- Engine power is 48.6 kW.
Figures as published by Hidromek in its own documents.
How the HMK 62 SS compares with its neighbours
The nearest models by weight, with the difference to the HMK 62 SS in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| HMK 62 SS | 3.976 t | 3,264 mm | 60 l/min |
| Hidromek HMK 62 T | 5.396 t (+1.42 t) | 3,264 mm | 60 l/min |
| XCMG XC8-S0750 | 3.8 t (-0.176 t) | 2,755 mm (-509) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
HMK 62 SS: what the brochure names
Features Hidromek names in its own brochure for the HMK 62 SS. Some of them may be optional, so check the machine's spec before you order.
- Operator protection certified to ROPS and FOPS.
- An engine that meets EU Stage V.
From Hidromek's published brochure. We keep the source document on file.
Other Hidromek models of a similar weight
More Hidromek backhoe loaders
Other makes of a similar weight
Operating weight within 2 t of the Hidromek HMK 62 SS.
Other Hidromek models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hidromek HMK 62 SS.
Questions about the HMK 62 SS
- What bucket size fits the HMK 62 SS?
- Hidromek lists a bucket capacity of 0.06 m³ for it.
- Which quick coupler is installed on your HMK 62 SS?
- Hidromek names no coupler system for it, so we cannot know which coupler your machine carries until you tell us. The attachments we list for the HMK 62 SS are built with these brackets: S30, S40, MS01, MS03, CW00, CW05, CW10, OQ40, HS02, HS03, HS06, Klac C, Klac D, Klac E, M02, M03, M10. Pick your coupler above or send us a photo of its nameplate, and we check the bracket before we quote.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hidromek/hidromek-hmk-62-ss, figures as of 2026-10-07.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Hidromek machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.