Attachments for the Liebherr R 938 Litronic (36,690 – 39,550 kg) weight range
Based on the R 938 Litronic (36,690 – 39,550 kg) operating-weight range. Final interface, geometry and hydraulic fit is confirmed by our engineers with the quote.
- Weight Class
- Heavy Excavator (30+ t)
- Operating Weight
- 36,690 – 39,550 kg
Operating weight as published by Liebherr, retrieved 2026-09-10. Source
StandardEarthmoving / heavy duty
DB - heavy duty digging bucket
The classic digging bucket for most materials, with a rock version for harder ground.
Candidate models by operating-weight range: DB-400 · 6 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,082–2,288
Standard
SDB - heavy duty skeleton DB bucket
The SDB separates material as you dig. Its interlocking ribs sort and sift different materials.
Candidate models by operating-weight range: SDB-400 · 2 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,917–2,224
Standard
DBF - flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. With Economy, Standard, Heavy Duty and Rock versions, one shape covers most kinds of soil.
Candidate models by operating-weight range: DBF-400 · 6 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,024–2,179
Standard
RDBF - flat-top skeleton DBF bucket on rods
Interlocking steel rods replace the solid bottom, C45 as standard and Hardox® as an option. Soil sifts out from the rocks while you dig trenches, drains and pipe bedding.
Candidate models by operating-weight range: RDBF-400 · 3 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,727–2,179
Standard
DSX - Nordic heavy duty digging bucket
Nordic deep digging buckets for excavators dig deep in hard and difficult soil. (Djupskopa / Graveskovl / Kuokkakauha)
Candidate models by operating-weight range: DS-HD-400 · 3 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 921–1,462
Standard
GD - rigid grading & ditching bucket
The rigid body has no tilt joint, which gives good control over the cut. It leaves a clean finish when you grade surfaces and clean ditches.
Candidate models by operating-weight range: GD-400 · 3 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,395–1,851
Standard
GDH - heavy duty hydraulic grading & ditching bucket
Hydraulic tilt grading buckets shape slopes and leave a level finish on uneven ground.
Candidate models by operating-weight range: GDH-400 · 3 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,336–1,780
Standard
SB - Dutch profile grading & ditching bucket
The Dutch profile has a wider opening, so sticky soil falls out easily. Use it for grading and ditch work in sticky soil. (slotenbak)
Candidate models by operating-weight range: SB-400 · 4 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,739–2,242
Standard
DCB - grading & ditching bucket with round profile
The round profile lets material flow out with little drag. Use it to grade surfaces and to dig and clean ditches.
Candidate models by operating-weight range: DCB-400 · 3 width variants
These models suit machines of 30–40 tCapacity SAE [dm³]: 1,307–1,735
Standard
CW - CW-System compatible quick-coupler
The proven wedge design keeps breakout force high, and a pilot-operated check valve secures the attachment. It takes CW-system brackets in manual, automatic and tilt/swivel versions.
Candidate models by operating-weight range: CW-45, CW-45 S, CW-U-45, CW-U-45 S
These models suit machines of 25–45 t
Standard
QC-PG - pin-grabber quick-coupler for factory brackets
It picks up the excavator maker's own bracket, and the variable pin-centre models take many different OEM attachments. One coupler works your existing buckets without new brackets.
Candidate models by operating-weight range: QC-PG-100, QC-U-PG-100
These models suit machines of 30–40 t
Standard
RIP - heavy duty ripper
A single shank made of high-strength material, so it wears less. It breaks up tough soil, rock and frozen ground so the material is easier to load.
Candidate models by operating-weight range: Ripper-E
These models suit machines of 30–40 t
Liebherr R 938 Litronic (36,690 – 39,550 kg): machine data
- Engine power
- 220 kW
As published by Liebherr, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Liebherr R 938 Litronic (36,690 – 39,550 kg) sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Liebherr models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Liebherr R 938 Litronic (36,690 – 39,550 kg).
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Liebherr R 938 Litronic (36,690 – 39,550 kg).
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.