Operating-weight guide

Attachments for the XCMG XE300E weight range

Bucket line: DB - heavy duty digging bucket1000–1800 mm wide

We usually reply within 1 working day
We check the fit before we send the quote
Every offer names the dispatch week
If a bracket we made is wrong and does not fit your machine, we replace it.

Catalogue sizes for the XE300E

Each size below has a catalogue row rated for a carrier of 32,800 kg operating weight. Tell us which sizes you want and we reply with an offer.

On a narrow screen the table scrolls sideways.

Attachment	Sizes	Capacity [dm³]	Width [mm]	Weight [kg]
DB - heavy duty digging bucket	DB-400 · 6 width variants	1,082–2,288 SAE	1,000–1,800	957–1,480
SDB - heavy duty skeleton DB bucket	SDB-400 · 2 width variants	1,917–2,224 SAE	1,600–1,800	1,411–1,550
DBF - flat-top digging bucket for quick coupler	DBF-400 · 6 width variants	1,024–2,179 SAE	1,000–1,800	854–1,312
RDBF - flat-top skeleton DBF bucket on rods	RDBF-400 · 3 width variants	1,727–2,179 SAE	1,500–1,800	1,067–1,213
DSX - Nordic heavy duty digging bucket	DS-HD-400 · 3 width variants	921–1,462 SAE	1,000–1,400	952–1,214
GD - rigid grading & ditching bucket, 12–40 t	GD-400 · 3 width variants	1,395–1,851 SAE	2,000–2,600	856–1,055
GDH - heavy duty hydraulic grading & ditching bucket	GDH-400 · 3 width variants	1,336–1,780 SAE	2,000–2,600	1,218–1,415
SB - Dutch profile grading & ditching bucket	SB-400 · 4 width variants	1,739–2,242 SAE	2,000–2,500	889–1,065
DCB - grading & ditching bucket with round profile	DCB-400 · 3 width variants	1,307–1,735 SAE	2,000–2,600	721–893
RIP - heavy duty ripper	Ripper-E			490
QC-S - S-System Scandinavian quick-coupler	QC-S70, QC-S80, QC-U-S70, QC-U-S80			270–350
CW - CW-System compatible quick-coupler	CW-45, CW-45 S, CW-U-45, CW-U-45 S			435–1,146
QC-HS / QC-MS - MS-System compatible quick-coupler	QC-HS-25			310
QC-PG - pin-grabber quick-coupler for factory brackets	QC-PG-90, QC-PG-100, QC-ML-M-70, QC-ML-M-80, QC-U-PG-90, QC-U-PG-100			167–1,435

Get a price

Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.

Message us on WhatsAppPhotos and voice notes are welcome.

For publishers: cite or embed this table

Cite this table as https://sieruta.com/en/fit/xcmg/xcmg-xe300e, figures as of 2026-09-11.

Embed this table on your site

Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.

<table>
<caption>Families that fit the XCMG XE300E, with their own figures</caption>
<thead><tr><th scope="col">Attachment</th><th scope="col">Sizes</th><th scope="col">Capacity [dm³]</th><th scope="col">Width [mm]</th><th scope="col">Weight [kg]</th></tr></thead>
<tbody>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/db-heavy-duty-digging-bucket">DB - heavy duty digging bucket</a></td><td>DB-400 · 6 width variants</td><td>1,082–2,288 SAE</td><td>1,000–1,800</td><td>957–1,480</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/sdb-heavy-duty-skeleton-bucket-for-excavator">SDB - heavy duty skeleton DB bucket</a></td><td>SDB-400 · 2 width variants</td><td>1,917–2,224 SAE</td><td>1,600–1,800</td><td>1,411–1,550</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/dbf-flat-top-digging-bucket-for-excavator-with-quick-coupler">DBF - flat-top digging bucket for quick coupler</a></td><td>DBF-400 · 6 width variants</td><td>1,024–2,179 SAE</td><td>1,000–1,800</td><td>854–1,312</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/rdbf-flat-top-skeleton-rod-dbf-bucket">RDBF - flat-top skeleton DBF bucket on rods</a></td><td>RDBF-400 · 3 width variants</td><td>1,727–2,179 SAE</td><td>1,500–1,800</td><td>1,067–1,213</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/ds-nordic-heavy-duty-digging-bucket">DSX - Nordic heavy duty digging bucket</a></td><td>DS-HD-400 · 3 width variants</td><td>921–1,462 SAE</td><td>1,000–1,400</td><td>952–1,214</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/gd-rigid-grading-bucket">GD - rigid grading &amp; ditching bucket, 12–40 t</a></td><td>GD-400 · 3 width variants</td><td>1,395–1,851 SAE</td><td>2,000–2,600</td><td>856–1,055</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/gdh-heavy-duty-hydraulic-grading-ditching-bucket">GDH - heavy duty hydraulic grading &amp; ditching bucket</a></td><td>GDH-400 · 3 width variants</td><td>1,336–1,780 SAE</td><td>2,000–2,600</td><td>1,218–1,415</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/sb-dutch-profile-grading-ditching-bucket">SB - Dutch profile grading &amp; ditching bucket</a></td><td>SB-400 · 4 width variants</td><td>1,739–2,242 SAE</td><td>2,000–2,500</td><td>889–1,065</td></tr>
<tr><td><a href="https://sieruta.com/en/products/buckets/digging/dcb-grading-ditching-bucket-round-profile">DCB - grading &amp; ditching bucket with round profile</a></td><td>DCB-400 · 3 width variants</td><td>1,307–1,735 SAE</td><td>2,000–2,600</td><td>721–893</td></tr>
<tr><td><a href="https://sieruta.com/en/products/tools/rippers-rakes/rip-heavy-duty-ripper">RIP - heavy duty ripper</a></td><td>Ripper-E</td><td></td><td></td><td>490</td></tr>
<tr><td><a href="https://sieruta.com/en/products/quick-couplers/s-system/s-system-scandinavian-quick-coupler">QC-S - S-System Scandinavian quick-coupler</a></td><td>QC-S70, QC-S80, QC-U-S70, QC-U-S80</td><td></td><td></td><td>270–350</td></tr>
<tr><td><a href="https://sieruta.com/en/products/quick-couplers/cw-system/cw-system-quick-coupler">CW - CW-System compatible quick-coupler</a></td><td>CW-45, CW-45 S, CW-U-45, CW-U-45 S</td><td></td><td></td><td>435–1,146</td></tr>
<tr><td><a href="https://sieruta.com/en/products/quick-couplers/ms-system/ms-system-quick-coupler">QC-HS / QC-MS - MS-System compatible quick-coupler</a></td><td>QC-HS-25</td><td></td><td></td><td>310</td></tr>
<tr><td><a href="https://sieruta.com/en/products/quick-couplers/pin-grabber/pin-grabber-quick-coupler">QC-PG - pin-grabber quick-coupler for factory brackets</a></td><td>QC-PG-90, QC-PG-100, QC-ML-M-70, QC-ML-M-80, QC-U-PG-90, QC-U-PG-100</td><td></td><td></td><td>167–1,435</td></tr>
</tbody>
</table>
<p>Figures from <a href="https://sieruta.com/en/fit/xcmg/xcmg-xe300e">https://sieruta.com/en/fit/xcmg/xcmg-xe300e</a>, as of 2026-09-11.</p>

Sizes are matched to the published operating weight of the XE300E.

Weight Class: Heavy Excavator (30–65 t)
Operating Weight: 32,800 kg

Family-owned group, founded in 1996
More than 50,000 attachments delivered
Built in our own factory in Poland

Operating weight as published by XCMG, retrieved 2026-09-11. Source

No open-licence photo of this machine exists. The drawing shows the type (excavator, Heavy 30–65 t), not this machine.

Start here

The attachments buyers in your market ask for first, sized for the XE300E.

Which coupler is on your machine?

Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.

How to measure your coupler

Not sure which system it is? Three measurements tell us which bracket you need.

Measure the diameter of both pins.
Measure the distance between the pin centres.
Measure the width between the inside faces of the ears.

If the coupler has a make or type printed on it, send that too.

Send me the spec sheet for my machine

Pick a bucket line and we email you its spec sheet, with the sizes we build for the XE300E.

Send this answer to a colleague or dealer

Bucket line

Link

Machine, line and sizes

XCMG XE300E: DBF - flat-top digging bucket for quick coupler (DBF-400)

XE300E at a glance

Figure	Value	Source
Max dig depth	7,200 mm	maker's document (xcmgeuropa.com)
Max reach	10,470 mm	maker's document (xcmgeuropa.com)
Max dump height	7,180 mm	maker's document (xcmgeuropa.com)
Arm length	2,650–3,110 mm	maker's document (xcmgeuropa.com)
Main pump flow	532 l/min	maker's document (xcmgeuropa.com)
Auxiliary flow	45 l/min	maker's document (xcmguk.com)
Auxiliary pressure	240 bar	maker's document (xcmguk.com)
Bucket capacity	1.3–1.56 m³	maker's document (xcmgeuropa.com)
Bucket width	1,230–1,631 mm	maker's document (xcmgeuropa.com)
Lift capacity	16,600 kg	maker's document (xcmgeuropa.com)
Transport width	3,190 mm	maker's document (xcmgeuropa.com)

Only figures the maker publishes for this model. Where a figure is missing, no value is shown.

What the XE300E figures mean for its attachments

Its auxiliary circuit is rated at 45 l/min and 240 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
The main pump delivers up to 532 l/min at 343.2 bar. That is the pump output of the whole machine, not the flow an attachment gets.
It digs down to 7,200 mm. That is the deepest trench it can open.
Its maximum reach is 10,470 mm.
It dumps at up to 7,180 mm, so a truck or skip side has to sit below that height.
XCMG offers arms from 2,650 to 3,110 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
XCMG lists buckets from 1,230 to 1,631 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: DB - heavy duty digging bucket (DB-400); SDB - heavy duty skeleton DB bucket (SDB-400); DBF - flat-top digging bucket for quick coupler (DBF-400); RDBF - flat-top skeleton DBF bucket on rods (RDBF-400); DSX - Nordic heavy duty digging bucket (DS-HD-400)
XCMG lists bucket capacities from 1.3 to 1.56 m³.
Bucket breakout force is 206 kN and arm crowd force 150 kN. That is the force a bucket or ripper works with at the tooth.
XCMG gives a lifting capacity of 16,600 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
For transport it measures 10,645 x 3,190 x 3,640 mm (length, width, height).
Engine power is 173 kW.

Figures as published by XCMG in its own documents.

How the XE300E compares with its neighbours

The nearest models by weight, with the difference to the XE300E in parentheses where both makers publish the figure.

Model	Operating weight	Max dig depth	Main pump flow
XE300E	32.8 t	7,200 mm	532 l/min
XCMG XE300EN	32.5 t (-0.3 t)	7,200 mm	532 l/min
XCMG XE330E	32.5 t (-0.3 t)	7,030 mm (-170)	640 l/min (+108)
Develon DX300LC-7 SLR	33 t (+0.2 t)	13,780 mm (+6,580)	496 l/min (-36)

Figures as each maker publishes them. A difference is shown only where both machines have a published value.

XE300E: build years and variants

Build years: 2021–2026

Variants

XE300E (2021–2026)

Years and variants as listed in the LECTURA Specs database.

XE300E: what the brochure names

Features XCMG names in its own brochure for the XE300E. Some of them may be optional, so check the machine's spec before you order.

Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
An engine that meets EU Stage V.
A rear or side view camera.
Operator protection certified to ROPS and FOPS.

From XCMG's published brochure. We keep the source document on file.

Questions about the XE300E

What bucket width fits the XE300E?: XCMG lists buckets from 1,230 to 1,631 mm wide for it. Pick a width in that range from the sizes above.
Can the XE300E run a hydraulic attachment?: Yes, if the tool's rated range covers the auxiliary circuit: 45 l/min at 240 bar.

Buckets Tools Quick couplers

XCMG XE300E: machine data

Operating weight: 32,800 kg
Engine power: 173 kW
Maximum digging depth: 7,200 mm
Maximum dump height: 7,180 mm
Bucket breakout force: 206 kN
Arm crowd force: 150 kN
Auxiliary circuit flow: 45 l/min
Auxiliary circuit pressure: 240 bar

As published by XCMG, retrieved 2026-09-18. Source

Before you order: check the interface

The weight class of the XCMG XE300E sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.

Heavy excavators dig rock, load trucks and work in quarries, so wear decides the bucket as much as capacity does. Rock and reinforced buckets carry thicker wear steel, teeth and side cutters, and the bucket is sized to the trucks it loads and to the density of the material.

Quick coupler brackets at this weight

In our model tables, the attachments listed for the XCMG XE300E at its weight are built with these brackets. Each code opens the models that list it.

Measure the diameter of both bucket pins.
Measure the distance between the pin centres.
Measure the inside width between the stick ears.
If the machine runs a quick coupler, note its make and type.

What these terms mean:

How to choose an attachment for the job:

Other XCMG models of a similar weight

Other makes of a similar weight

Operating weight within 2 t of the XCMG XE300E.

Other XCMG models with the same coupler brackets

Our model tables give these machines the same quick coupler brackets.

Why buy from the factory

Cutting, machining, welding and painting on one site, our own factory in Poland, EU
More than 50,000 attachments delivered since 2008
A record for every serial number, so the spare parts match your attachment

Need Custom Specifications?

We can manufacture attachments to your exact pin spacing and requirements for XCMG XE300E.

Get a price Custom Engineering

Do you sell XCMG machines? Machine dealer supply

Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.