Attachments for the Bobcat E10z weight range
Weight Class: Mini Excavator (1–6 t) Operating Weight: 1,176 kg
- Bucket line
- GP - general purpose digging bucket 250–500 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the E10z
Families to look at first
- GP - general purpose digging bucket 250–500 mm
- GB - rigid grading & ditching bucket, German profile 600–1,000 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 800–1,000 mm
Quick coupler brackets at this weight
- S30
- S40
- MS01
- MS03
- CW00
- CW05
- OQ40
- HS02
- HS03
- Klac C
- Klac D
- Klac E
- M02
- M03
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the E10z
Each size below has a catalogue row rated for a carrier of 1,176 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the E10z.
On a narrow screen the table scrolls sideways.
Buckets
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-2 · 2 width variants | 1,000–1,200 | 56–66 | |
| LRS - short land rakes for mini-excavators | LRS-2 | 665 | 48 | |
| RIP mini - ripper shank for mini-excavator | Ripper-2.5 | 21 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Also available | ||||
| RC - root cutter | Root cutter-2 | 170 | 13 | |
| RRB - root rake bucket profile | RRB-20 | 900 | 80 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S30-H/150, QC-S30-H/180, QC-S30-SA/150, QC-S30-SA/180, QC-U-S30-H/150, QC-U-S30-H/180 | 15–42 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-05, CW-U-05 | 25–67 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-01, QC-MS-01, QC-U-HS-01 | 20–46 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-ML-M-30 | 14 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Bobcat E10z sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Bobcat E10z at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the E10z.
Send this answer to a colleague or dealer
Bobcat E10z: GP - general purpose digging bucket (GP-10). Shortlisted by operating weight
Sizes are matched to the published operating weight of the E10z.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 1,176 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Bobcat, retrieved 2026-09-10. Source
Bobcat E10z: machine data
- Operating weight
- 1,176 kg
- Engine power
- 7.5 kW
- Maximum digging depth
- 1,820 mm
- Maximum dump height
- 1,818 mm document from res.cloudinary.com
- Bucket breakout force
- 8.3 kN document from bobcatcms.online
- Arm crowd force
- 5.6 kN document from bobcatcms.online
- Quick coupler
- Mechanical quick coupler
- Auxiliary circuit flow
- 20 l/min document from res.cloudinary.com
- Auxiliary circuit pressure
- 190 bar document from res.cloudinary.com
- Max reach
- 3,093 mm document from res.cloudinary.com
- Arm length
- 810 mm document from res.cloudinary.com
- Main pump flow
- 20 l/min document from res.cloudinary.com
- Lift capacity
- 204 kg document from res.cloudinary.com
- Transport width
- 710 mm document from bobcatcms.online
As published by Bobcat, retrieved 2026-09-18. Source
What the E10z figures mean for its attachments
- Its auxiliary circuit is rated at 20 l/min and 190 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.document from res.cloudinary.com
- The main pump delivers up to 20 l/min. That is the pump output of the whole machine, not the flow an attachment gets.document from res.cloudinary.com
- Bobcat lists this quick coupler for it: Coupler, mechanical. The bracket on every attachment has to match the coupler.document from res.cloudinary.com
- It digs down to 1,820 mm. That is the deepest trench it can open.
- Its maximum reach is 3,093 mm.document from res.cloudinary.com
- It dumps at up to 1,818 mm, so a truck or skip side has to sit below that height.document from res.cloudinary.com
- Its arm is 810 mm long.document from res.cloudinary.com
- Bucket breakout force is 8.3 kN and arm crowd force 5.6 kN. That is the force a bucket or ripper works with at the tooth.document from bobcatcms.online
- Bobcat gives a lifting capacity of 204 kg. Check a heavy grab or hammer, plus its load, against the full load chart.document from res.cloudinary.com
- For transport it measures 2,793 x 710 x 2,209 mm (length, width, height).document from bobcatcms.online
- Engine power is 7.5 kW.
Figures without a source note are as published by Bobcat in its own documents.
How the E10z compares with its neighbours
The nearest models by weight, with the difference to the E10z in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| E10z | 1.176 t | 1,820 mm | 20 l/min | 20 l/min |
| Bobcat E10e | 1.201 t (+0.025 t) | 1,820 mm | 25 l/min (+5) | 20 l/min |
| Bobcat E08 | 1.138 t (-0.038 t) | 1,820 mm | 20 l/min | 20 l/min |
| Develon DX10Z-7 | 1.165 t (-0.011 t) | 2,205 mm (+385) | 20.8 l/min (+0.8) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
E10z: build years and variants
Build years: 2019–2026
Variants
- E10z (2019–2026)
Years and variants as listed in the LECTURA Specs database.
E10z: what the brochure names
Features Bobcat names in its own brochure for the E10z. Some of them may be optional, so check the machine's spec before you order.
- Operator protection certified to ROPS and FOPS.
- A zero tail swing: the rear stays inside the tracks when the upper slews.
- Boom swing, for digging along walls and around obstacles.
- A dozer blade.
From Bobcat's published brochure. We keep the source document on file.
Other Bobcat models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Bobcat E10z.
Other Bobcat models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Bobcat E10z.
Questions about the E10z
- Which quick coupler is installed on your E10z?
- Bobcat names no coupler system for it, so we cannot know which coupler your machine carries until you tell us. The attachments we list for the E10z are built with these brackets: S30, S40, MS01, MS03, CW00, CW05, OQ40, HS02, HS03, Klac C, Klac D, Klac E, M02, M03. Pick your coupler above or send us a photo of its nameplate, and we check the bracket before we quote.
- Can the E10z run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 20 l/min at 190 bar.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/bobcat/bobcat-e10z, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Bobcat machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.