Attachments for the JCB 8008 CTS weight range
- Bucket line
- GP - general purpose digging bucket250–500 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the 8008 CTS
Each size below has a catalogue row rated for a carrier of 950 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/jcb/jcb-8008, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the 8008 CTS.
- Weight Class
- 1t
- Operating Weight
- 950 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by JCB, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the 8008 CTS.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the 8008 CTS.
Send this answer to a colleague or dealer
JCB 8008 CTS: GP - general purpose digging bucket (GP-10)
8008 CTS at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 1,690 mm | maker's website (jcb.com) |
| Max reach | 3,110 mm | maker's document (terra-world.com) |
| Max dump height | 1,980 mm | maker's website (jcb.com) |
| Arm length | 880 mm | maker's document (terra-world.com) |
| Main pump flow | 22.4 l/min | maker's document (terra-world.com) |
| Auxiliary flow | 22.4 l/min | maker's document (terra-world.com) |
| Bucket width | 160–410 mm | maker's document (terra-world.com) |
| Transport width | 700 mm | maker's document (terra-world.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the 8008 CTS figures mean for its attachments
- Its auxiliary circuit delivers 22.4 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 22.4 l/min at 170 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 1,690 mm. That is the deepest trench it can open.
- Its maximum reach is 3,110 mm.
- It dumps at up to 1,980 mm, so a truck or skip side has to sit below that height.
- Its arm is 880 mm long.
- JCB lists buckets from 160 to 410 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: GP - general purpose digging bucket (GP-10); GPL - general purpose digging bucket (GPL-10); PDP mini - skeleton BDP stone bucket (PDP-10); DS mini - Scandinavian deep digging bucket for mini-excavator (DS-20); KS mini - cable bucket for mini-excavator (KS-20); KSV mini - Scandinavian profile cable V bucket for mini-excavator (KSV-20)
- For transport it measures 2,682 x 700 x 2,310 mm (length, width, height).
- Engine power is 9 kW.
Figures as published by JCB in its own documents.
How the 8008 CTS compares with its neighbours
The nearest models by weight, with the difference to the 8008 CTS in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth |
|---|---|---|
| 8008 CTS | 0.95 t | 1,690 mm |
| Caterpillar 300.9D | 0.94 t (-0.01 t) | 1,731 mm (+41) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Questions about the 8008 CTS
- What bucket width fits the 8008 CTS?
- JCB lists buckets from 160 to 410 mm wide for it. Pick a width in that range from the sizes above.
- Can the 8008 CTS run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 22.4 l/min of its auxiliary circuit.
Each family shows its candidate models by operating-weight range.
Also available
- RC - root cutter
Root cutter-2
- RRB - root rake bucket profile
RRB-20
Other mini-ex attachments
- LR mini - straight land rakes for mini-excavator
LR-2 · 2 width variants
- LRS - short land rakes for mini-excavators
LRS-2
- RIP mini - ripper shank for mini-excavator
Ripper-2.5
- GRB light - mini-excavator grading beam with lowered mass
GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants
Standard mini-ex buckets set No. 1
- GP - general purpose digging bucket
GP-10 · 4 width variants
- GB - rigid grading & ditching bucket, German profile
GB-10 · 3 width variants
- GBH - hydraulic tilt ditching bucket for mini-excavator
GBH-10 · 2 width variants
Standard mini-ex buckets set No. 2
- GPL - general purpose digging bucket
GPL-10 · 4 width variants
- GBP - rigid grading & ditching bucket, Italian profile
GBP-10 · 3 width variants
Dutch mini-ex buckets set No. 3
- SB mini - Dutch profile grading & ditching bucket for mini-excavator
SB-10 · 3 width variants
- PDP mini - skeleton BDP stone bucket
PDP-10 · 2 width variants
Nordic mini-ex buckets set No. 4
- DS mini - Scandinavian deep digging bucket for mini-excavator
DS-20 · 4 width variants
- KS mini - cable bucket for mini-excavator
KS-20 · 3 width variants
- KSV mini - Scandinavian profile cable V bucket for mini-excavator
KSV-20 · 3 width variants
- QC-S - S-System Scandinavian quick-coupler
QC-S30-H/150, QC-S30-H/180, QC-S30-SA/150, QC-S30-SA/180, QC-U-S30-H/150, QC-U-S30-H/180
- CW - CW-System compatible quick-coupler
CW-00, CW-U-00
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-01, QC-MS-01, QC-U-HS-01
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-ML-M-30
Bucket sets for this machine
Sets of one bucket profile that include buckets listed for the JCB 8008 CTS. Each set lists the buckets that match the machine's operating weight.
- German-profile set
Buckets in the set for this weight: GP, GB, GBH
- Italian-profile set
Buckets in the set for this weight: GPL, GBP
- Nordic-profile set
Buckets in the set for this weight: DS, KS, KSV
- Dutch-profile set
Buckets in the set for this weight: SB, PDP
JCB 8008 CTS: machine data
- Operating weight
- 950 kg
- Engine power
- 9 kW
- Maximum digging depth
- 1,690 mm
- Maximum dump height
- 1,980 mm
- Auxiliary circuit flow
- 22.4 l/min
As published by JCB, retrieved 2026-09-18. Source
Before you order: check the interface
The weight class of the JCB 8008 CTS sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the JCB 8008 CTS at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other makes of a similar weight
Operating weight within 2 t of the JCB 8008 CTS.
Other JCB models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for JCB 8008 CTS.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell JCB machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.