Attachments for the Sany SY175W weight range
- Bucket line
- DB - heavy duty digging bucket600–1400 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the SY175W
Each size below has a catalogue row rated for a carrier of 18,300 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-190 · 5 width variants | 374–1,164 SAE | 600–1,400 | 350–643 |
| SDB - heavy duty skeleton DB bucket | SDB-230 · 2 width variants | 1,183–1,290 SAE | 1,400–1,500 | 833–880 |
| DBF - flat-top digging bucket for quick coupler | DBF-190 · 5 width variants | 376–1,102 SAE | 600–1,400 | 346–638 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-190 · 3 width variants | 911–1,100 SAE | 1,200–1,400 | 563–630 |
| DSX - Nordic heavy duty digging bucket | DS-HD-190 · 3 width variants | 570–982 SAE | 800–1,200 | 505–679 |
| GD - rigid grading & ditching bucket, 12–40 t | GD-190 · 3 width variants | 544–692 SAE | 1,600–2,000 | 325–390 |
| GDH - heavy duty hydraulic grading & ditching bucket | GDH-190 · 3 width variants | 530–685 SAE | 1,600–2,000 | 572–638 |
| SB - Dutch profile grading & ditching bucket | SB-190 · 4 width variants | 731–1,045 SAE | 1,600–2,200 | 394–513 |
| DCB - grading & ditching bucket with round profile | DCB-190 · 3 width variants | 535–680 SAE | 1,600–2,000 | 298–359 |
| PS - Scandinavian universal / grading bucket | PS-190 · 4 width variants | 937–1,228 SAE | 1,800–2,200 | 560–690 |
| PSH - hydraulic swivelling grading bucket | PS-190 · 4 width variants | 1,800–2,200 | ||
| CB - heavy duty hydraulic clamp bucket | CBR-190 | 803 | 1,200 | 631 |
| TH - hydraulic thumb for excavator | TH-19 | 700 | 340 | |
| MR - heavy duty excavator multi-ripper | MR-22 | 1,300 | 546 | |
| DuoRIP - double ripper for root extraction | Duo-Ripper-30 | 500 | 565 | |
| GRB - excavator grading beam | GRB maxi · 6 variants | 2,500–3,000 | 357–680 | |
| QC-S - S-System Scandinavian quick-coupler | QC-S60, QC-S70, QC-U-S60, QC-U-S70 | 115–270 | ||
| CW - CW-System compatible quick-coupler | CW-30, CW-30 S, CW-U-30, CW-U-30 S | 220–230 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-10, QC-HS-21, QC-MS-10, QC-MS-21, QC-U-HS-10, QC-U-HS-21 | 200–310 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-ML-M-70, QC-U-PG-80 | 105–400 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/sany/sany-sy175w, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the SY175W.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 18,300 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Hydraulics for tilt / grab / rotator
- Auxiliary flow
- 130 l/min
Source Sany specification, accessed 2026-09-27 View source
Operating weight as published by Sany, retrieved 2026-09-11. Source
Start here
The attachments buyers in your market ask for first, sized for the SY175W.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the SY175W.
Send this answer to a colleague or dealer
Sany SY175W: DBF - flat-top digging bucket for quick coupler (DBF-190)
SY175W at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 5,540 mm | maker's website (sanyeurope.com) |
| Max reach | 8,950 mm | maker's document (sanyeurope.com) |
| Max dump height | 7,100 mm | maker's document (sanyeurope.com) |
| Arm length | 2,500 mm | maker's document (sanyeurope.com) |
| Main pump flow | 250 l/min | maker's document (sanyeurope.com) |
| Auxiliary flow | 130 l/min | maker's website (sanyeurope.com) |
| Bucket capacity | 0.22–0.7 m³ | maker's document (sanyeurope.com) |
| Transport width | 2,550 mm | maker's document (sanyeurope.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the SY175W figures mean for its attachments
- Its auxiliary circuit delivers 130 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 250 l/min at 350 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 5,540 mm. That is the deepest trench it can open.
- Its maximum reach is 8,950 mm.
- It dumps at up to 7,100 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,500 mm long.
- Sany lists bucket capacities from 0.22 to 0.7 m³.
- Bucket breakout force is 107.7 kN and arm crowd force 86 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 8,250 x 2,550 x 3,200 mm (length, width, height).
- Engine power is 130 kW.
Figures as published by Sany in its own documents.
How the SY175W compares with its neighbours
The nearest models by weight, with the difference to the SY175W in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| SY175W | 18.3 t | 5,540 mm | 250 l/min | 130 l/min |
| Sany SY155U 2PB | 16.5 t (-1.8 t) | 5,274 mm (-266) | not published | not published |
| Sany SY155U | 16 t (-2.3 t) | 5,468 mm (-72) | 220 l/min (-30) | 110 l/min (-20) |
| Komatsu PC170LC-11 | 18.3 t | 6,250 mm (+710) | 298 l/min (+48) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
SY175W: build years and variants
Build years: 2021–2026
Variants
- SY175W (2021–2026)
Years and variants as listed in the LECTURA Specs database.
Questions about the SY175W
- What bucket size fits the SY175W?
- Sany lists bucket capacities from 0.22 to 0.7 m³ for it.
- Can the SY175W run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 130 l/min of its auxiliary circuit.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-190 · 5 width variants
- SDB - heavy duty skeleton DB bucket
SDB-230 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-190 · 5 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-190 · 3 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-190 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-190 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-190 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-190 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-190 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-190 · 4 width variants
- PSH - hydraulic swivelling grading bucket
PS-190 · 4 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-19
- MR - heavy duty excavator multi-ripper
MR-22
- DuoRIP - double ripper for root extraction
Duo-Ripper-30
- GRB - excavator grading beam
GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S60, QC-S70, QC-U-S60, QC-U-S70
- CW - CW-System compatible quick-coupler
CW-30, CW-30 S, CW-U-30, CW-U-30 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-10, QC-HS-21, QC-MS-10, QC-MS-21, QC-U-HS-10, QC-U-HS-21
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-ML-M-70, QC-U-PG-80
Sany SY175W: machine data
- Operating weight
- 18,300 kg
- Engine power
- 130 kW
- Maximum digging depth
- 5,540 mm
- Maximum dump height
- 7,100 mm
- Bucket breakout force
- 107.7 kN
- Arm crowd force
- 86 kN
- Auxiliary circuit flow
- 130 l/min
As published by Sany, retrieved 2026-09-27. Source
Before you order: check the interface
The weight class of the Sany SY175W sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Sany SY175W at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Sany models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Sany SY175W.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Sany SY175W.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Sany machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.