Attachments for the Hitachi ZX210LC-7 / ZX210LCN-7 weight range
- Bucket line
- DB - heavy duty digging bucket600–1600 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the ZX210LC-7 / ZX210LCN-7
Each size below has a catalogue row rated for a carrier of 21,900 – 23,900 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-230 · 6 width variants, DB-300 · 6 width variants | 391–1,569 SAE | 600–1,600 | 420–1,100 |
| SDB - heavy duty skeleton DB bucket | SDB-230 · 2 width variants | 1,183–1,290 SAE | 1,400–1,500 | 833–880 |
| DBF - flat-top digging bucket for quick coupler | DBF-230 · 6 width variants, DBF-300 · 6 width variants | 398–1,550 SAE | 600–1,600 | 411–957 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-230 · 3 width variants, RDBF-300 · 3 width variants | 1,092–1,550 SAE | 1,300–1,600 | 657–922 |
| DSX - Nordic heavy duty digging bucket | DS-HD-250 · 3 width variants | 615–1,070 SAE | 800–1,200 | 642–847 |
| GD - rigid grading & ditching bucket, 12–40 t | GD-230 · 3 width variants, GD-300 · 3 width variants | 644–1,447 SAE | 1,600–2,400 | 365–874 |
| GDH - heavy duty hydraulic grading & ditching bucket | GDH-230 · 3 width variants, GDH-260 · 3 width variants | 677–1,171 SAE | 1,600–2,400 | 624–932 |
| SB - Dutch profile grading & ditching bucket | SB-230 · 4 width variants, SB-260 · 4 width variants | 820–1,489 SAE | 1,600–2,400 | 479–701 |
| DCB - grading & ditching bucket with round profile | DCB-230 · 3 width variants, DCB-260 · 3 width variants | 612–1,116 SAE | 1,600–2,400 | 320–644 |
| PS - Scandinavian universal / grading bucket | PS-230 · 4 width variants, PS-300 · 4 width variants | 1,179–1,830 SAE | 1,800–2,200 | 679–1,043 |
| PSH - hydraulic swivelling grading bucket | PS-230 · 4 width variants, PS-300 · 4 width variants | 1,800–2,200 | ||
| CB - heavy duty hydraulic clamp bucket | CBR-260 | 1,071 | 1,200 | 1,100 |
| TH - hydraulic thumb for excavator | TH-26 | 780 | 520 | |
| AC - excavator asphalt cutters | AC-30 | 165 | ||
| MR - heavy duty excavator multi-ripper | MR-22, MR-26 | 1,300 | 546–734 | |
| RIP - heavy duty ripper | Ripper-D | 403 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-30 | 500 | 565 | |
| GRB - excavator grading beam | GRB maxi · 6 variants | 2,500–3,000 | 357–680 | |
| QC-S - S-System Scandinavian quick-coupler | QC-S70, QC-U-S70 | 270 | ||
| CW - CW-System compatible quick-coupler | CW-30, CW-30 S, CW-40, CW-40 S, CW-U-30, CW-U-30 S, CW-U-40, CW-U-40 S | 220–240 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-21, QC-MS-21, QC-U-HS-21 | 310 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-80, QC-ML-M-65, QC-ML-M-70, QC-U-PG-80 | 132–400 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx210lc-7-zx210lcn-7, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the ZX210LC-7 / ZX210LCN-7.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 21,900 – 23,900 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the ZX210LC-7 / ZX210LCN-7.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ZX210LC-7 / ZX210LCN-7.
Send this answer to a colleague or dealer
Hitachi ZX210LC-7 / ZX210LCN-7: DBF - flat-top digging bucket for quick coupler (DBF-230, DBF-300)
ZX210LC-7 / ZX210LCN-7 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 6,670 mm | maker's document (hitachicm.com) |
| Max reach | 9,750 mm | maker's document (hitachicm.com) |
| Max dump height | 8,150 mm | maker's document (hitachicm.com) |
| Arm length | 2,420–2,910 mm | maker's document (hitachicm.com) |
| Main pump flow | 424 l/min | maker's document (hitachicm.com) |
| Bucket capacity | 0.51–1.2 m³ | maker's document (hitachicm.com) |
| Lift capacity | 11,120 kg | maker's document (hitachicm.com) |
| Quick coupler | CW, pin grabber and S-coupling | maker's document (hitachicm.com) |
| Transport width | 2,990 mm | maker's document (hitachicm.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the ZX210LC-7 / ZX210LCN-7 figures mean for its attachments
- The main pump delivers up to 424 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Hitachi lists this quick coupler for it: CW, pin grabber and S-coupling. The bracket on every attachment has to match the coupler.
- It digs down to 6,670 mm. That is the deepest trench it can open.
- Its maximum reach is 9,750 mm.
- It dumps at up to 8,150 mm, so a truck or skip side has to sit below that height.
- Hitachi offers arms from 2,420 to 2,910 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Hitachi lists bucket capacities from 0.51 to 1.2 m³.
- Bucket breakout force is 158 kN and arm crowd force 140 kN. That is the force a bucket or ripper works with at the tooth.
- Hitachi gives a lifting capacity of 11,120 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its transport width is 2,990 mm.
- Engine power is 128.4 kW.
Figures as published by Hitachi in its own documents.
How the ZX210LC-7 / ZX210LCN-7 compares with its neighbours
The nearest models by weight, with the difference to the ZX210LC-7 / ZX210LCN-7 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| ZX210LC-7 / ZX210LCN-7 | 21.9 t | 6,670 mm | 424 l/min |
| Hitachi MA200-G | 21.4 t (-0.5 t) | 6,570 mm (-100) | 388 l/min (-36) |
| Hitachi ZX220LC-GI | 21.2 t (-0.7 t) | 6,610 mm (-60) | 424 l/min |
| Develon DX210-7 | 21.9 t | 6,270 mm (-400) | 421.2 l/min (-2.8) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ZX210LC-7 / ZX210LCN-7: what the brochure names
Features Hitachi names in its own brochure for the ZX210LC-7 / ZX210LCN-7. Some of them may be optional, so check the machine's spec before you order.
- A two-piece boom.
- Telematics for tracking the machine remotely (ConSite).
- Operator protection certified to ROPS and FOPS.
- Work modes you select from the cab.
From Hitachi's published brochure. We keep the source document on file.
Questions about the ZX210LC-7 / ZX210LCN-7
- What bucket size fits the ZX210LC-7 / ZX210LCN-7?
- Hitachi lists bucket capacities from 0.51 to 1.2 m³ for it.
- Which quick coupler is installed on your ZX210LC-7 / ZX210LCN-7?
- Hitachi lists this coupler for it: CW, pin grabber and S-coupling. Order attachments with the matching bracket.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-230 · 6 width variants, DB-300 · 6 width variants
- SDB - heavy duty skeleton DB bucket
SDB-230 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-230 · 6 width variants, DBF-300 · 6 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-230 · 3 width variants, RDBF-300 · 3 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-250 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-230 · 3 width variants, GD-300 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-230 · 3 width variants, GDH-260 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-230 · 4 width variants, SB-260 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-230 · 3 width variants, DCB-260 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-230 · 4 width variants, PS-300 · 4 width variants
- PSH - hydraulic swivelling grading bucket
PS-230 · 4 width variants, PS-300 · 4 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-26
- AC - excavator asphalt cutters
AC-30
- MR - heavy duty excavator multi-ripper
MR-22, MR-26
- RIP - heavy duty ripper
Ripper-D
- DuoRIP - double ripper for root extraction
Duo-Ripper-30
- GRB - excavator grading beam
GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S70, QC-U-S70
- CW - CW-System compatible quick-coupler
CW-30, CW-30 S, CW-40, CW-40 S, CW-U-30, CW-U-30 S, CW-U-40, CW-U-40 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-21, QC-MS-21, QC-U-HS-21
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-80, QC-ML-M-65, QC-ML-M-70, QC-U-PG-80
Hitachi ZX210LC-7 / ZX210LCN-7: machine data
- Operating weight
- 21,900 – 23,900 kg
- Engine power
- 128.4 kW
- Maximum digging depth
- 6,670 mm
- Maximum dump height
- 8,150 mm
- Bucket breakout force
- 158 kN
- Arm crowd force
- 140 kN
- Quick coupler
- CW, pin grabber and S-coupling
As published by Hitachi, retrieved 2026-09-19. Source
Before you order: check the interface
The weight class of the Hitachi ZX210LC-7 / ZX210LCN-7 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX210LC-7 / ZX210LCN-7 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Hitachi models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX210LC-7 / ZX210LCN-7.
Other Hitachi models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX210LC-7 / ZX210LCN-7.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.