Attachments for the Kobelco SK220XDLC-10 weight range
- Bucket line
- DB - heavy duty digging bucket600–1,200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the SK220XDLC-10
Each size below has a catalogue row rated for a carrier of 22,000 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the SK220XDLC-10.
On a narrow screen the table scrolls sideways.
Buckets
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| TH - hydraulic thumb for excavator | TH-26 | 780 | 520 | |
| AC - excavator asphalt cutters | AC-30 | 165 | ||
| MR - heavy duty excavator multi-ripper | MR-22 | 1,300 | 546 | |
| RIP - heavy duty ripper | Ripper-D | 403 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-30 | 500 | 565 | |
| GRB - excavator grading beam | GRB maxi · 6 variants | 2,500–3,000 | 357–680 | |
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S70, QC-U-S70 | 270 | ||
| CW - CW-System compatible quick-couplerCW-System | CW-30, CW-30 S, CW-40, CW-40 S, CW-U-30, CW-U-30 S, CW-U-40, CW-U-40 S | 220–240 | ||
| QC-HS / QC-MS - MS-System compatible quick-couplerMS system | QC-HS-21, QC-MS-21, QC-U-HS-21 | 310 | ||
| QC-PG - pin-grabber quick-coupler for factory bracketsPin-grabber | QC-PG-80, QC-ML-M-65, QC-ML-M-70, QC-U-PG-80 | 132–400 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Kobelco SK220XDLC-10 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Kobelco SK220XDLC-10 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the SK220XDLC-10.
Send this answer to a colleague or dealer
Kobelco SK220XDLC-10: DBF - flat-top digging bucket for quick coupler (DBF-230)
Sizes are matched to the published operating weight of the SK220XDLC-10.
- Weight Class
- Large Excavator (10–30 t)
- Operating Weight
- 22,000 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Kobelco, retrieved 2026-09-10. Source
Kobelco SK220XDLC-10: machine data
- Operating weight
- 22,000 kg
- Engine power
- 114 kW
- Maximum digging depth
- 6,700 mm
- Maximum dump height
- 6,910 mm
- Bucket breakout force
- 157 kN
- Arm crowd force
- 112 kN
- Tail swing radius
- 2,910 mm
- Max reach
- 9,730 mmmaker's document (kobelco-europe.com)
- Arm length
- 2,400–2,940 mmmaker's document (kobelco-europe.com)
- Main pump flow
- 440 l/minmaker's document (kobelco-europe.com)
- Bucket capacity
- 0.8–1.2 m³maker's document (kobelco-europe.com)
- Bucket width
- 1,140–1,610 mmmaker's document (kobelco-europe.com)
- Lift capacity
- 5,750 kgmaker's document (kobelco-europe.com)
- Transport width
- 2,990 mmmaker's document (kobelco-europe.com)
As published by Kobelco, retrieved 2026-09-18. Source
What the SK220XDLC-10 figures mean for its attachments
- The main pump delivers up to 440 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 6,700 mm. That is the deepest trench it can open.
- Its maximum reach is 9,730 mm.
- It dumps at up to 6,910 mm, so a truck or skip side has to sit below that height.
- Kobelco offers arms from 2,400 to 2,940 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Kobelco lists buckets from 1,140 to 1,610 mm wide for this machine.Our sizes in that range: DB - heavy duty digging bucket (DB-230); SDB - heavy duty skeleton DB bucket (SDB-230); DBF - flat-top digging bucket for quick coupler (DBF-230); RDBF - flat-top skeleton DBF bucket on rods (RDBF-230); DSX - Nordic heavy duty digging bucket (DS-HD-250); GD - rigid grading & ditching bucket, 12–40 t (GD-230); GDH - heavy duty hydraulic grading & ditching bucket (GDH-230); SB - Dutch profile grading & ditching bucket (SB-230); DCB - grading & ditching bucket with round profile (DCB-230); CB - heavy duty hydraulic clamp bucket (CBR-260)
- Kobelco lists bucket capacities from 0.8 to 1.2 m³.
- Bucket breakout force is 157 kN and arm crowd force 112 kN. That is the force a bucket or ripper works with at the tooth.
- Kobelco gives a lifting capacity of 5,750 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 2,910 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 9,600 x 2,990 x 3,020 mm (length, width, height).
- Engine power is 114 kW.
Figures as published by Kobelco in its own documents.
How the SK220XDLC-10 compares with its neighbours
The nearest models by weight, with the difference to the SK220XDLC-10 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| SK220XDLC-10 | 22 t | 6,700 mm | 440 l/min |
| Kobelco SK210NLC-11E | 22 t | 7,260 mm (+560) | 440 l/min |
| Kobelco SK210LC-11E | 22.1 t (+0.1 t) | 6,420 mm (-280) | 440 l/min |
| Atlas 220W | 22 t | 6,300 mm (-400) | 380 l/min (-60) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
SK220XDLC-10: what the brochure names
Features Kobelco names in its own brochure for the SK220XDLC-10. Some of them may be optional, so check the machine's spec before you order.
- Automatic engine idle when the controls are left alone.
- Work modes you select from the cab.
- Two-speed travel.
- A rear or side view camera.
From Kobelco's published brochure. We keep the source document on file.
Other Kobelco models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Kobelco SK220XDLC-10.
Other Kobelco models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Kobelco SK220XDLC-10.
Questions about the SK220XDLC-10
- What bucket width fits the SK220XDLC-10?
- Kobelco lists buckets from 1,140 to 1,610 mm wide for it. Pick a width in that range.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/kobelco/kobelco-sk220xdlc-10, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Kobelco machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.