Attachments for the Kobelco SK260NLC-11E weight range
Weight Class: Large Excavator (10–30 t) Operating Weight: 26,600 – 27,900 kg
- Bucket line
- DB - heavy duty digging bucket 800–1,400 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the SK260NLC-11E
Families to look at first
- DBF - flat-top digging bucket for quick coupler 800–1,400 mm
- GD - rigid grading & ditching bucket, 12–40 t 1,800–2,400 mm
- GDH - heavy duty hydraulic grading & ditching bucket 1,800–2,400 mm
Quick coupler brackets at this weight
- S70
- MS10
- MS21
- MS25
- CW20
- CW30
- CW40
- CW45
- OQ65
- OQ70
- M26
- SW33
- SW48
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the SK260NLC-11E
Each size below has a catalogue row rated for a carrier of 26,600 – 27,900 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the SK260NLC-11E.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Digging & sorting buckets | ||||
| DB - heavy duty digging bucket | DB-300 · 4 width variants | 628–1,325 | 800–1,400 | 655–989 |
| SDB - heavy duty skeleton DB bucket | SDB-300 · 2 width variants | 1,375–1,492 | 1,500–1,600 | 1,051–1,106 |
| DBF - flat-top digging bucket for quick coupler Start here Price & lead time Get price & lead time | DBF-300 · 4 width variants | 630–1,306 | 800–1,400 | 580–862 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-300 · 3 width variants | 1,306–1,550 | 1,400–1,600 | 837–922 |
| DSX - Nordic heavy duty digging bucket | DS-HD-300 · 3 width variants | 678–1,178 | 800–1,200 | 755–1,002 |
Ditching, grading, sloping buckets | ||||
| GD - rigid grading & ditching bucket, 12–40 t Start here Price & lead time Get price & lead time | GD-300 · 3 width variants | 1,059–1,447 | 1,800–2,400 | 691–874 |
| GDH - heavy duty hydraulic grading & ditching bucket Start here Price & lead time Get price & lead time | GDH-300 · 3 width variants | 1,012–1,384 | 1,800–2,400 | 953–1,129 |
| SB - Dutch profile grading & ditching bucket | SB-300 · 5 width variants | 1,346–1,957 | 1,800–2,500 | 773–1,009 |
| DCB - grading & ditching bucket with round profile | DCB-300 · 3 width variants | 955–1,304 | 1,800–2,400 | 590–748 |
| PS - Scandinavian universal / grading bucket | PS-300 · 4 width variants | 1,389–1,830 | 1,800–2,200 | 863–1,043 |
| PSH - hydraulic swivelling grading bucket | PS-300 · 4 width variants | On request | 1,800–2,200 | On request |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| TH - hydraulic thumb for excavator | TH-30 | 800 | 620 | |
| AC - excavator asphalt cutters | AC-30 | 165 | ||
| MR - heavy duty excavator multi-ripper | MR-32 | 1,300 | 994 | |
| RIP - heavy duty ripper | Ripper-D | 403 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-30 | 500 | 565 | |
| GRB - excavator grading beam | GRB maxi · 6 variants | 2,500–3,000 | 357–680 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S70, QC-U-S70 | 270 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-40, CW-40 S, CW-45, CW-45 S, CW-U-40, CW-U-40 S, CW-U-45, CW-U-45 S | 230–1,146 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-21, QC-HS-25, QC-MS-21, QC-U-HS-21 | 310 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-PG-90, QC-ML-M-65, QC-ML-M-70, QC-U-PG-90 | 132–440 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Kobelco SK260NLC-11E sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Kobelco SK260NLC-11E at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the SK260NLC-11E.
Send this answer to a colleague or dealer
Kobelco SK260NLC-11E: DBF - flat-top digging bucket for quick coupler (DBF-300). Shortlisted by operating weight
Sizes are matched to the published operating weight of the SK260NLC-11E.
- Weight Class
- Large Excavator (10–30 t)
- Operating Weight
- 26,600 – 27,900 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Kobelco, retrieved 2026-09-10. Source
Kobelco SK260NLC-11E: machine data
- Operating weight
- 26,600 – 27,900 kg
- Engine power
- 148 kW
- Maximum digging depth
- 6,820 mm
- Maximum dump height
- 8,650 mm
- Bucket breakout force
- 187 kN
- Arm crowd force
- 134 kN
- Tail swing radius
- 3,100 mm
- Auxiliary circuit flow
- 93.9 l/min
- Max reach
- 10,820 mm maker's document (kobelco-europe.com)
- Arm length
- 2,500–3,660 mm maker's document (kobelco-europe.com)
- Main pump flow
- 490 l/min maker's document (kobelco-europe.com)
- Bucket capacity
- 0.4–1.4 m³ maker's document (kobelco-europe.com)
- Bucket width
- 754–1,510 mm maker's document (kobelco-europe.com)
- Lift capacity
- 13,390 kg maker's document (kobelco-europe.com)
- Transport width
- 2,990 mm maker's document (kobelco-europe.com)
As published by Kobelco, retrieved 2026-09-18. Source
What the SK260NLC-11E figures mean for its attachments
- Its auxiliary circuit delivers 93.9 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 490 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 6,820 mm. That is the deepest trench it can open.
- Its maximum reach is 10,820 mm.
- It dumps at up to 8,650 mm, so a truck or skip side has to sit below that height.
- Kobelco offers arms from 2,500 to 3,660 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Kobelco lists buckets from 754 to 1,510 mm wide for this machine.Our sizes in that range: DB - heavy duty digging bucket (DB-300); SDB - heavy duty skeleton DB bucket (SDB-300); DBF - flat-top digging bucket for quick coupler (DBF-300); RDBF - flat-top skeleton DBF bucket on rods (RDBF-300); DSX - Nordic heavy duty digging bucket (DS-HD-300)
- Kobelco lists bucket capacities from 0.4 to 1.4 m³.
- Bucket breakout force is 187 kN and arm crowd force 134 kN. That is the force a bucket or ripper works with at the tooth.
- Kobelco gives a lifting capacity of 13,390 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 3,100 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 10,210 x 2,990 x 3,240 mm (length, width, height).
- Engine power is 148 kW.
Figures as published by Kobelco in its own documents.
How the SK260NLC-11E compares with its neighbours
The nearest models by weight, with the difference to the SK260NLC-11E in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| SK260NLC-11E | 26.6 t | 6,820 mm | 490 l/min | 93.9 l/min |
| Kobelco SK260LC-11E | 26.7 t (+0.1 t) | 6,820 mm | 490 l/min | 93.9 l/min |
| Kobelco SK210D-11E | 27.5 t (+0.9 t) | not published | 440 l/min (-50) | not published |
| Atlas 260LC | 26.6 t | 7,600 mm (+780) | 380 l/min (-110) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
SK260NLC-11E: what the brochure names
Features Kobelco names in its own brochure for the SK260NLC-11E. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Automatic engine idle when the controls are left alone.
- Work modes you select from the cab.
- Operator protection certified to ROPS and FOPS.
From Kobelco's published brochure. We keep the source document on file.
Other makes of a similar weight
Operating weight within 2 t of the Kobelco SK260NLC-11E.
Other Kobelco models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Kobelco SK260NLC-11E.
Questions about the SK260NLC-11E
- What bucket width fits the SK260NLC-11E?
- Kobelco lists buckets from 754 to 1,510 mm wide for it. Pick a width in that range.
- Can the SK260NLC-11E run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 93.9 l/min of its auxiliary circuit.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/kobelco/kobelco-sk260nlc-11e, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Kobelco machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.