Attachments for the XCMG XE260EN weight range
Weight Class: Large Excavator (10–30 t) Operating Weight: 26,850 kg
- Bucket line
- DB - heavy duty digging bucket 800–1,600 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the XE260EN
Families to look at first
- DBF - flat-top digging bucket for quick coupler 800–1,600 mm
- GD - rigid grading & ditching bucket, 12–40 t 1,800–2,400 mm
- GDH - heavy duty hydraulic grading & ditching bucket 1,800–2,400 mm
Quick coupler brackets at this weight
- S70
- MS10
- MS21
- CW20
- CW30
- CW40
- OQ65
- OQ70
- M26
- SW33
- SW48
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the XE260EN
Each size below has a catalogue row rated for a carrier of 26,850 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the XE260EN.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Digging & sorting buckets | ||||
| DB - heavy duty digging bucket | DB-300 · 6 width variants | 628–1,569 | 800–1,600 | 655–1,100 |
| SDB - heavy duty skeleton DB bucket | SDB-300 · 2 width variants | 1,375–1,492 | 1,500–1,600 | 1,051–1,106 |
| DBF - flat-top digging bucket for quick coupler Start here Price & lead time Get price & lead time | DBF-300 · 6 width variants | 630–1,550 | 800–1,600 | 580–957 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-300 · 3 width variants | 1,306–1,550 | 1,400–1,600 | 837–922 |
| DSX - Nordic heavy duty digging bucket | DS-HD-300 · 3 width variants | 678–1,178 | 800–1,200 | 755–1,002 |
Ditching, grading, sloping buckets | ||||
| GD - rigid grading & ditching bucket, 12–40 t Start here Price & lead time Get price & lead time | GD-300 · 3 width variants | 1,059–1,447 | 1,800–2,400 | 691–874 |
| GDH - heavy duty hydraulic grading & ditching bucket Start here Price & lead time Get price & lead time | GDH-300 · 3 width variants | 1,012–1,384 | 1,800–2,400 | 953–1,129 |
| SB - Dutch profile grading & ditching bucket | SB-300 · 5 width variants | 1,346–1,957 | 1,800–2,500 | 773–1,009 |
| DCB - grading & ditching bucket with round profile | DCB-300 · 3 width variants | 955–1,304 | 1,800–2,400 | 590–748 |
| PS - Scandinavian universal / grading bucket | PS-300 · 4 width variants | 1,389–1,830 | 1,800–2,200 | 863–1,043 |
| PSH - hydraulic swivelling grading bucket | PS-300 · 4 width variants | On request | 1,800–2,200 | On request |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| TH - hydraulic thumb for excavator | TH-30 | 800 | 620 | |
| AC - excavator asphalt cutters | AC-30 | 165 | ||
| RIP - heavy duty ripper | Ripper-D | 403 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-30 | 500 | 565 | |
| GRB - excavator grading beam | GRB maxi · 6 variants | 2,500–3,000 | 357–680 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S70, QC-U-S70 | 270 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-40, CW-40 S, CW-45, CW-45 S, CW-U-40, CW-U-40 S, CW-U-45, CW-U-45 S | 230–1,146 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-21, QC-HS-25, QC-MS-21, QC-U-HS-21 | 310 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-PG-90, QC-ML-M-65, QC-ML-M-70, QC-U-PG-90 | 132–440 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the XCMG XE260EN sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the XCMG XE260EN at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the XE260EN.
Send this answer to a colleague or dealer
XCMG XE260EN: DBF - flat-top digging bucket for quick coupler (DBF-300). Shortlisted by operating weight
Sizes are matched to the published operating weight of the XE260EN.
- Weight Class
- Large Excavator (10–30 t)
- Operating Weight
- 26,850 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by XCMG, retrieved 2026-09-11. Source
XCMG XE260EN: machine data
- Operating weight
- 26,850 kg
- Engine power
- 145 kW
- Maximum digging depth
- 6,925 mm document from lectura-specs.com
- Bucket breakout force
- 170 kN
- Arm crowd force
- 120 kN
- Bucket capacity
- 0.4–1.5 m³ document from lectura-specs.com
- Transport width
- 3,210 mm document from lectura-specs.com
As published by XCMG, retrieved 2026-09-18. Source
What the XE260EN figures mean for its attachments
- It digs down to 6,925 mm. That is the deepest trench it can open.document from lectura-specs.com
- XCMG lists bucket capacities from 0.4 to 1.5 m³.document from lectura-specs.com
- Bucket breakout force is 170 kN and arm crowd force 120 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 10,250 x 3,210 x 2,990 mm (length, width, height).document from xcmgeuropa.com, document from lectura-specs.com
- Engine power is 145 kW.
Figures without a source note are as published by XCMG in its own documents.
How the XE260EN compares with its neighbours
The nearest models by weight, with the difference to the XE260EN in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth |
|---|---|---|
| XE260EN | 26.85 t | 6,925 mm |
| XCMG XE280E | 26.85 t | not published |
| XCMG XE235ECR | 25.8 t (-1.05 t) | 6,646 mm (-279) |
| Komatsu PC240-8 SLF | 26.9 t (+0.05 t) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
XE260EN: build years and variants
Build years: 2021–2026
Variants
- XE260EN (2021–2026)
Years and variants as listed in the LECTURA Specs database.
Other XCMG models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the XCMG XE260EN.
Other XCMG models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for XCMG XE260EN.
Questions about the XE260EN
- What bucket size fits the XE260EN?
- XCMG lists bucket capacities from 0.4 to 1.5 m³ for it.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/xcmg/xcmg-xe260en, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell XCMG machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.