Attachments for the CASE WX155E SR weight range
- Bucket line
- DB - heavy duty digging bucket600–1400 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the WX155E SR
Each size below has a catalogue row rated for a carrier of 17,170 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-190 · 5 width variants | 374–1,164 SAE | 600–1,400 | 350–643 |
| SDB - heavy duty skeleton DB bucket | SDB-230 · 2 width variants | 1,183–1,290 SAE | 1,400–1,500 | 833–880 |
| DBF - flat-top digging bucket for quick coupler | DBF-190 · 5 width variants | 376–1,102 SAE | 600–1,400 | 346–638 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-190 · 3 width variants | 911–1,100 SAE | 1,200–1,400 | 563–630 |
| DSX - Nordic heavy duty digging bucket | DS-HD-190 · 3 width variants | 570–982 SAE | 800–1,200 | 505–679 |
| GD - rigid grading & ditching bucket, 12–40 t | GD-190 · 3 width variants | 544–692 SAE | 1,600–2,000 | 325–390 |
| GDH - heavy duty hydraulic grading & ditching bucket | GDH-190 · 3 width variants | 530–685 SAE | 1,600–2,000 | 572–638 |
| SB - Dutch profile grading & ditching bucket | SB-190 · 4 width variants | 731–1,045 SAE | 1,600–2,200 | 394–513 |
| DCB - grading & ditching bucket with round profile | DCB-190 · 3 width variants | 535–680 SAE | 1,600–2,000 | 298–359 |
| PS - Scandinavian universal / grading bucket | PS-190 · 4 width variants | 937–1,228 SAE | 1,800–2,200 | 560–690 |
| PSH - hydraulic swivelling grading bucket | PS-190 · 4 width variants | 1,800–2,200 | ||
| CB - heavy duty hydraulic clamp bucket | CBR-190 | 803 | 1,200 | 631 |
| TH - hydraulic thumb for excavator | TH-19 | 700 | 340 | |
| AC - excavator asphalt cutters | AC-18 | 99 | ||
| RIP - heavy duty ripper | Ripper-C | 280 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-18 | 450 | 380 | |
| GRB - excavator grading beam | GRB midi · 6 variants, GRB maxi · 6 variants | 2,000–3,000 | 216–680 | |
| QC-S - S-System Scandinavian quick-coupler | QC-S60, QC-U-S60 | 115 | ||
| CW - CW-System compatible quick-coupler | CW-30, CW-30 S, CW-U-30, CW-U-30 S | 220–230 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-10, QC-MS-10, QC-U-HS-10 | 200 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-70, QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-U-PG-70, QC-U-PG-80 | 105–400 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/case/case-wx155e-sr, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the WX155E SR.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 17,170 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by CASE, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the WX155E SR.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the WX155E SR.
Send this answer to a colleague or dealer
CASE WX155E SR: DBF - flat-top digging bucket for quick coupler (DBF-190)
WX155E SR at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 5,280 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Max reach | 8,490 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Max dump height | 7,090 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Arm length | 2,000–2,600 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Main pump flow | 260 l/min | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Bucket capacity | 0.21–0.73 m³ | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Bucket width | 450–1,200 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Lift capacity | 4,890 kg | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Transport width | 2,530 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the WX155E SR figures mean for its attachments
- The main pump delivers up to 260 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 5,280 mm. That is the deepest trench it can open.
- Its maximum reach is 8,490 mm.
- It dumps at up to 7,090 mm, so a truck or skip side has to sit below that height.
- CASE offers arms from 2,000 to 2,600 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- CASE lists buckets from 450 to 1,200 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: DB - heavy duty digging bucket (DB-190); DBF - flat-top digging bucket for quick coupler (DBF-190); RDBF - flat-top skeleton DBF bucket on rods (RDBF-190); DSX - Nordic heavy duty digging bucket (DS-HD-190); CB - heavy duty hydraulic clamp bucket (CBR-190)
- CASE lists bucket capacities from 0.21 to 0.73 m³.
- CASE gives a lifting capacity of 4,890 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 7,480 x 2,530 x 3,450 mm (length, width, height).
- Engine power is 127 kW.
Figures as published by CASE in its own documents.
How the WX155E SR compares with its neighbours
The nearest models by weight, with the difference to the WX155E SR in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| WX155E SR | 17.17 t | 5,280 mm | 260 l/min |
| CASE CX160E | 17.3 t (+0.13 t) | 6,490 mm (+1,210) | 318 l/min (+58) |
| CASE WX160E | 18.39 t (+1.22 t) | 6,260 mm (+980) | 260 l/min |
| Hyundai HW150A CR | 17.17 t | 5,280 mm | 261 l/min (+1) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
WX155E SR: what the brochure names
Features CASE names in its own brochure for the WX155E SR. Some of them may be optional, so check the machine's spec before you order.
- A two-piece boom.
- Work modes you select from the cab.
- Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
- Operator protection certified to ROPS and FOPS.
From CASE's published brochure. We keep the source document on file.
Questions about the WX155E SR
- What bucket width fits the WX155E SR?
- CASE lists buckets from 450 to 1,200 mm wide for it. Pick a width in that range from the sizes above.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-190 · 5 width variants
- SDB - heavy duty skeleton DB bucket
SDB-230 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-190 · 5 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-190 · 3 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-190 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-190 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-190 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-190 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-190 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-190 · 4 width variants
- PSH - hydraulic swivelling grading bucket
PS-190 · 4 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-19
- AC - excavator asphalt cutters
AC-18
- RIP - heavy duty ripper
Ripper-C
- DuoRIP - double ripper for root extraction
Duo-Ripper-18
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S60, QC-U-S60
- CW - CW-System compatible quick-coupler
CW-30, CW-30 S, CW-U-30, CW-U-30 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-10, QC-MS-10, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-70, QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-U-PG-70, QC-U-PG-80
CASE WX155E SR: machine data
- Operating weight
- 17,170 kg
- Engine power
- 127 kW
- Maximum digging depth
- 5,280 mm
- Maximum dump height
- 7,090 mm
As published by CASE, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the CASE WX155E SR sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the CASE WX155E SR at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other CASE models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the CASE WX155E SR.
Other CASE models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for CASE WX155E SR.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell CASE machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.