Attachments for the Caterpillar 325 weight range
- Bucket line
- DB - heavy duty digging bucket800–1600 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the 325
Each size below has a catalogue row rated for a carrier of 28,400 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-300 · 6 width variants | 628–1,569 SAE | 800–1,600 | 655–1,100 |
| SDB - heavy duty skeleton DB bucket | SDB-300 · 2 width variants | 1,375–1,492 SAE | 1,500–1,600 | 1,051–1,106 |
| DBF - flat-top digging bucket for quick coupler | DBF-300 · 6 width variants | 630–1,550 SAE | 800–1,600 | 580–957 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-300 · 3 width variants | 1,306–1,550 SAE | 1,400–1,600 | 837–922 |
| DSX - Nordic heavy duty digging bucket | DS-HD-300 · 3 width variants | 678–1,178 SAE | 800–1,200 | 755–1,002 |
| GD - rigid grading & ditching bucket, 12–40 t | GD-300 · 3 width variants | 1,059–1,447 SAE | 1,800–2,400 | 691–874 |
| GDH - heavy duty hydraulic grading & ditching bucket | GDH-300 · 3 width variants | 1,012–1,384 SAE | 1,800–2,400 | 953–1,129 |
| SB - Dutch profile grading & ditching bucket | SB-300 · 5 width variants | 1,346–1,957 SAE | 1,800–2,500 | 773–1,009 |
| DCB - grading & ditching bucket with round profile | DCB-300 · 3 width variants | 955–1,304 SAE | 1,800–2,400 | 590–748 |
| PS - Scandinavian universal / grading bucket | PS-300 · 4 width variants | 1,389–1,830 SAE | 1,800–2,200 | 863–1,043 |
| PSH - hydraulic swivelling grading bucket | PS-300 · 4 width variants | 1,800–2,200 | ||
| TH - hydraulic thumb for excavator | TH-30 | 800 | 620 | |
| AC - excavator asphalt cutters | AC-30 | 165 | ||
| MR - heavy duty excavator multi-ripper | MR-32 | 1,300 | 994 | |
| RIP - heavy duty ripper | Ripper-D | 403 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-30 | 500 | 565 | |
| GRB - excavator grading beam | GRB maxi · 6 variants | 2,500–3,000 | 357–680 | |
| QC-S - S-System Scandinavian quick-coupler | QC-S70, QC-U-S70 | 270 | ||
| CW - CW-System compatible quick-coupler | CW-40, CW-40 S, CW-45, CW-45 S, CW-U-40, CW-U-40 S, CW-U-45, CW-U-45 S | 230–1,146 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-25 | 310 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-90, QC-ML-M-65, QC-ML-M-70, QC-U-PG-90 | 132–440 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/caterpillar/caterpillar-325, figures as of 2026-09-13.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the 325.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 28,400 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Caterpillar, retrieved 2026-09-13. Source
Start here
The attachments buyers in your market ask for first, sized for the 325.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the 325.
Send this answer to a colleague or dealer
Caterpillar 325: DBF - flat-top digging bucket for quick coupler (DBF-300)
325 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 6,700 mm | maker's document (s7d2.scene7.com) |
| Max reach | 10,130 mm | maker's document (s7d2.scene7.com) |
| Max dump height | 8,540 mm | maker's document (s7d2.scene7.com) |
| Arm length | 2,900 mm | maker's document (s7d2.scene7.com) |
| Main pump flow | 429 l/min | maker's document (s7d2.scene7.com) |
| Auxiliary flow | 51 l/min | maker's document (s7d2.scene7.com) |
| Auxiliary pressure | 140 bar | maker's document (s7d2.scene7.com) |
| Bucket capacity | 0.46–1.59 m³ | maker's document (s7d2.scene7.com) |
| Bucket width | 600–1,350 mm | maker's document (s7d2.scene7.com) |
| Lift capacity | 7,450 kg | maker's document (s7d2.scene7.com) |
| Quick coupler | Pin Grabber QC B | maker's document (s7d2.scene7.com) |
| Transport width | 3,170 mm | maker's document (s7d2.scene7.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the 325 figures mean for its attachments
- Its auxiliary circuit is rated at 51 l/min and 140 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 429 l/min at 350 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Caterpillar lists this quick coupler for it: Pin Grabber QC B. The bracket on every attachment has to match the coupler.
- It digs down to 6,700 mm. That is the deepest trench it can open.
- Its maximum reach is 10,130 mm.
- It dumps at up to 8,540 mm, so a truck or skip side has to sit below that height.
- Its arm is 2,900 mm long.
- Caterpillar lists buckets from 600 to 1,350 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: DB - heavy duty digging bucket (DB-300); DBF - flat-top digging bucket for quick coupler (DBF-300); DSX - Nordic heavy duty digging bucket (DS-HD-300)
- Caterpillar lists bucket capacities from 0.46 to 1.59 m³.
- Caterpillar gives a lifting capacity of 7,450 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- For transport it measures 8,890 x 3,170 x 3,210 mm (length, width, height).
Figures as published by Caterpillar in its own documents.
How the 325 compares with its neighbours
The nearest models by weight, with the difference to the 325 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| 325 | 28.4 t | 6,700 mm | 429 l/min | 51 l/min |
| Caterpillar 326 | 25.6 t (-2.8 t) | 6,820 mm (+120) | 481 l/min (+52) | 54 l/min (+3) |
| Caterpillar 323 | 25 t (-3.4 t) | 11,690 mm (+4,990) | 429 l/min | not published |
| Volvo EC260 | 28.46 t (+0.06 t) | 6,590 mm (-110) | 480 l/min (+51) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
325: what the brochure names
Features Caterpillar names in its own brochure for the 325. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Use with a tiltrotator.
- Telematics for tracking the machine remotely (VisionLink).
- Work modes you select from the cab.
From Caterpillar's published brochure. We keep the source document on file.
Questions about the 325
- What bucket width fits the 325?
- Caterpillar lists buckets from 600 to 1,350 mm wide for it. Pick a width in that range from the sizes above.
- Which quick coupler is installed on your 325?
- Caterpillar lists this coupler for it: Pin Grabber QC B. Order attachments with the matching bracket.
- Can the 325 run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 51 l/min at 140 bar.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-300 · 6 width variants
- SDB - heavy duty skeleton DB bucket
SDB-300 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-300 · 6 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-300 · 3 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-300 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-300 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-300 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-300 · 5 width variants
- DCB - grading & ditching bucket with round profile
DCB-300 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-300 · 4 width variants
- PSH - hydraulic swivelling grading bucket
PS-300 · 4 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-30
- AC - excavator asphalt cutters
AC-30
- MR - heavy duty excavator multi-ripper
MR-32
- RIP - heavy duty ripper
Ripper-D
- DuoRIP - double ripper for root extraction
Duo-Ripper-30
- GRB - excavator grading beam
GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S70, QC-U-S70
- CW - CW-System compatible quick-coupler
CW-40, CW-40 S, CW-45, CW-45 S, CW-U-40, CW-U-40 S, CW-U-45, CW-U-45 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-25
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-90, QC-ML-M-65, QC-ML-M-70, QC-U-PG-90
Before you order: check the interface
The weight class of the Caterpillar 325 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Caterpillar 325 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Caterpillar models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Caterpillar 325.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Caterpillar 325.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Caterpillar machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.