Attachments for the Hitachi ZX150W-7 weight range
- Bucket line
- DB - heavy duty digging bucket500–1400 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the ZX150W-7
Each size below has a catalogue row rated for a carrier of 15,300 – 17,200 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DB - heavy duty digging bucket | DB-160 · 5 width variants, DB-190 · 5 width variants | 225–1,164 SAE | 500–1,400 | 248–643 |
| SDB - heavy duty skeleton DB bucket | SDB-160 · 2 width variants, SDB-230 · 2 width variants | 543–1,290 SAE | 1,000–1,500 | 392–880 |
| DBF - flat-top digging bucket for quick coupler | DBF-160 · 5 width variants, DBF-190 · 5 width variants | 250–1,102 SAE | 500–1,400 | 256–638 |
| RDBF - flat-top skeleton DBF bucket on rods | RDBF-160 · 2 width variants, RDBF-190 · 3 width variants | 615–1,100 SAE | 1,000–1,400 | 402–630 |
| DSX - Nordic heavy duty digging bucket | DS-HD-190 · 3 width variants | 570–982 SAE | 800–1,200 | 505–679 |
| GD - rigid grading & ditching bucket, 12–40 t | GD-160 · 3 width variants, GD-190 · 3 width variants | 484–692 SAE | 1,600–2,000 | 305–390 |
| GDH - heavy duty hydraulic grading & ditching bucket | GDH-160 · 3 width variants, GDH-190 · 3 width variants | 456–685 SAE | 1,600–2,000 | 447–638 |
| SB - Dutch profile grading & ditching bucket | SB-160 · 4 width variants, SB-190 · 4 width variants | 583–1,045 SAE | 1,500–2,200 | 357–513 |
| DCB - grading & ditching bucket with round profile | DCB-160 · 3 width variants, DCB-190 · 3 width variants | 454–680 SAE | 1,600–2,000 | 273–359 |
| PS - Scandinavian universal / grading bucket | PS-160 · 5 width variants, PS-190 · 4 width variants | 744–1,228 SAE | 1,600–2,200 | 424–690 |
| PSH - hydraulic swivelling grading bucket | PS-160 · 5 width variants, PS-190 · 4 width variants | 1,600–2,200 | ||
| CB - heavy duty hydraulic clamp bucket | CBR-190 | 803 | 1,200 | 631 |
| TH - hydraulic thumb for excavator | TH-16, TH-19 | 700 | 310–340 | |
| AC - excavator asphalt cutters | AC-18 | 99 | ||
| MR - heavy duty excavator multi-ripper | MR-17 | 1,300 | 415 | |
| RIP - heavy duty ripper | Ripper-C | 280 | ||
| DuoRIP - double ripper for root extraction | Duo-Ripper-18 | 450 | 380 | |
| GRB - excavator grading beam | GRB midi · 6 variants, GRB maxi · 6 variants | 2,000–3,000 | 216–680 | |
| RGB - skeleton rod grading & sorting bucket | RGB-160 | 593 SAE | 2,000 | 315 |
| QC-S - S-System Scandinavian quick-coupler | QC-S60, QC-U-S60 | 115 | ||
| CW - CW-System compatible quick-coupler | CW-30, CW-30 S, CW-U-30, CW-U-30 S | 220–230 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-10, QC-MS-10, QC-U-HS-10 | 200 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-70, QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-U-PG-70, QC-U-PG-80 | 105–400 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx150w-7, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the ZX150W-7.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 15,300 – 17,200 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the ZX150W-7.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ZX150W-7.
Send this answer to a colleague or dealer
Hitachi ZX150W-7: DBF - flat-top digging bucket for quick coupler (DBF-160, DBF-190)
ZX150W-7 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 5,770 mm | maker's document (hitachicm.com) |
| Max reach | 9,260 mm | maker's document (hitachicm.com) |
| Max dump height | 7,990 mm | maker's document (hitachicm.com) |
| Arm length | 2,100–3,010 mm | maker's document (hitachicm.com) |
| Main pump flow | 234 l/min | maker's document (hitachicm.com) |
| Auxiliary flow | 40 l/min | maker's document (hitachicm.com) |
| Bucket capacity | 0.19–0.66 m³ | maker's document (hitachicm.com) |
| Lift capacity | 6,270 kg | maker's document (hitachicm.com) |
| Quick coupler | CW, pin grabber and S-coupling | maker's document (hitachicm.com) |
| Transport width | 2,550 mm | maker's document (hitachicm.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the ZX150W-7 figures mean for its attachments
- Its auxiliary circuit delivers 40 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 234 l/min at 343 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Hitachi lists this quick coupler for it: CW, pin grabber and S-coupling. The bracket on every attachment has to match the coupler.
- It digs down to 5,770 mm. That is the deepest trench it can open.
- Its maximum reach is 9,260 mm.
- It dumps at up to 7,990 mm, so a truck or skip side has to sit below that height.
- Hitachi offers arms from 2,100 to 3,010 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Hitachi lists bucket capacities from 0.19 to 0.66 m³.
- Bucket breakout force is 104 kN and arm crowd force 71 kN. That is the force a bucket or ripper works with at the tooth.
- Hitachi gives a lifting capacity of 6,270 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its transport width is 2,550 mm.
- Engine power is 105 kW.
Figures as published by Hitachi in its own documents.
How the ZX150W-7 compares with its neighbours
The nearest models by weight, with the difference to the ZX150W-7 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| ZX150W-7 | 15.3 t | 5,770 mm | 234 l/min |
| Hitachi ZX130-7 SLF | 14.9 t (-0.4 t) | 10,160 mm (+4,390) | 234 l/min |
| Hitachi ZX135USL-7 Forestry | 15.9 t (+0.6 t) | 5,760 mm (-10) | 234 l/min |
| Komatsu PW150ES-6 | 15.3 t | 5,880 mm (+110) | 299 l/min (+65) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ZX150W-7: build years and variants
Build years: 2021–2026
Variants
- ZX150W-7 (2021–2026)
Years and variants as listed in the LECTURA Specs database.
ZX150W-7: what the brochure names
Features Hitachi names in its own brochure for the ZX150W-7. Some of them may be optional, so check the machine's spec before you order.
- Telematics for tracking the machine remotely (ConSite).
- A two-piece boom.
- Operator protection certified to ROPS and FOPS.
- Work modes you select from the cab.
From Hitachi's published brochure. We keep the source document on file.
Questions about the ZX150W-7
- What bucket size fits the ZX150W-7?
- Hitachi lists bucket capacities from 0.19 to 0.66 m³ for it.
- Which quick coupler is installed on your ZX150W-7?
- Hitachi lists this coupler for it: CW, pin grabber and S-coupling. Order attachments with the matching bracket.
- Can the ZX150W-7 run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 40 l/min of its auxiliary circuit.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-160 · 5 width variants, DB-190 · 5 width variants
- SDB - heavy duty skeleton DB bucket
SDB-160 · 2 width variants, SDB-230 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-160 · 5 width variants, DBF-190 · 5 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-160 · 2 width variants, RDBF-190 · 3 width variants
- DSX - Nordic heavy duty digging bucket
DS-HD-190 · 3 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-160 · 3 width variants, GD-190 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-160 · 3 width variants, GDH-190 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-160 · 4 width variants, SB-190 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-160 · 3 width variants, DCB-190 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-160 · 5 width variants, PS-190 · 4 width variants
- PSH - hydraulic swivelling grading bucket
PS-160 · 5 width variants, PS-190 · 4 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-16, TH-19
- AC - excavator asphalt cutters
AC-18
- MR - heavy duty excavator multi-ripper
MR-17
- RIP - heavy duty ripper
Ripper-C
- DuoRIP - double ripper for root extraction
Duo-Ripper-18
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S60, QC-U-S60
- CW - CW-System compatible quick-coupler
CW-30, CW-30 S, CW-U-30, CW-U-30 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-10, QC-MS-10, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-70, QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-U-PG-70, QC-U-PG-80
Hitachi ZX150W-7: machine data
- Operating weight
- 15,300 – 17,200 kg
- Engine power
- 105 kW
- Maximum digging depth
- 5,770 mm
- Maximum dump height
- 7,990 mm
- Bucket breakout force
- 104 kN
- Arm crowd force
- 71 kN
- Quick coupler
- CW, pin grabber and S-coupling
- Auxiliary circuit flow
- 40 l/min
As published by Hitachi, retrieved 2026-09-19. Source
Before you order: check the interface
The weight class of the Hitachi ZX150W-7 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX150W-7 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX150W-7.
Other Hitachi models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX150W-7.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.