Attachments for the New Holland E100D weight range
- Bucket line
- DB - heavy duty digging bucket400–1200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the E100D
Each size below has a catalogue row rated for a carrier of 10,080 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/new-holland/new-holland-e100d, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the E100D.
- Weight Class
- Midi Excavator (6–12 t)
- Operating Weight
- 10,080 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by New Holland, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the E100D.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the E100D.
Send this answer to a colleague or dealer
New Holland E100D: DBF - flat-top digging bucket for quick coupler (DBF-120)
E100D at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 4,670 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Max dump height | 6,270 mm | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Main pump flow | 192 l/min | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Auxiliary flow | 160 l/min | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
| Auxiliary pressure | 200 bar | maker's document (cnhi-p-001-delivery.sitecorecontenthub.cloud) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the E100D figures mean for its attachments
- Its auxiliary circuit is rated at 160 l/min and 200 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 192 l/min at 290 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 4,670 mm. That is the deepest trench it can open.
- It dumps at up to 6,270 mm, so a truck or skip side has to sit below that height.
Figures as published by New Holland in its own documents.
How the E100D compares with its neighbours
The nearest models by weight, with the difference to the E100D in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| E100D | 10.08 t | 4,670 mm | 192 l/min | 160 l/min |
| New Holland E90D | 9.21 t (-0.87 t) | 4,480 mm (-190) | 192 l/min | 160 l/min |
| New Holland E85D | 8.83 t (-1.25 t) | 4,020 mm (-650) | 192 l/min | 160 l/min |
| CASE CX100E | 10.08 t | 4,670 mm | 192 l/min | 62 l/min (-98) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
E100D: build years and variants
Build years: 2022–2026
Variants
- E100D (2022–2026)
Years and variants as listed in the LECTURA Specs database.
E100D: what the brochure names
Features New Holland names in its own brochure for the E100D. Some of them may be optional, so check the machine's spec before you order.
- A zero tail swing: the rear stays inside the tracks when the upper slews.
- A two-piece boom.
- A dozer blade.
- An engine that meets EU Stage V.
From New Holland's published brochure. We keep the source document on file.
Questions about the E100D
- Can the E100D run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 160 l/min at 200 bar.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-120 · 6 width variants
- SDB - heavy duty skeleton DB bucket
SDB-120 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-120 · 6 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-120 · 2 width variants
Ditching, grading, sloping buckets
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-120 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-120 · 4 width variants
Nordic mini-ex buckets set No. 4
- PS mini - Scandinavian universal grading bucket for mini-excavator
PS-120 · 5 width variants
- PSH mini - hydraulic swivelling grading bucket for mini-excavators
PS-120 · 5 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-16
- DuoRIP - double ripper for root extraction
Duo-Ripper-12
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
- QC-S - S-System Scandinavian quick-coupler
QC-S45-H, QC-S50, QC-S45-SA, QC-U-S45-H, QC-U-S50
- CW - CW-System compatible quick-coupler
CW-10, CW-20, CW-20 S, CW-U-10, CW-U-20, CW-U-20 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-08, QC-HS-10, QC-MS-08, QC-MS-10, QC-U-HS-08, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-60, QC-ML-M-50, QC-ML-M-55, QC-U-PG-60
Bucket sets for this machine
Sets of one bucket profile that include buckets listed for the New Holland E100D. Each set lists the buckets that match the machine's operating weight.
- Nordic-profile set
Buckets in the set for this weight: PS, PSH
Before you order: check the interface
The weight class of the New Holland E100D sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A midi excavator is often the main machine on a site, trenching, loading and grading in the same day. Buyers usually start with a general purpose bucket, a grading bucket and a quick coupler, then add other tools when the work calls for them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the New Holland E100D at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other New Holland models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the New Holland E100D.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for New Holland E100D.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell New Holland machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.