Attachments for the Hitachi ZX17U-6 / ZX19U-6 weight range
- Bucket line
- GP - general purpose digging bucket250–600 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the ZX17U-6 / ZX19U-6
Each size below has a catalogue row rated for a carrier of 1,780 – 1,900 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| GP - general purpose digging bucket | GP-20 · 5 width variants, GP-30 · 4 width variants | 21–88 SAE | 250–600 | 22–55 |
| GB - rigid grading & ditching bucket, German profile | GB-20 · 3 width variants, GB-30 · 2 width variants | 57–114 SAE | 800–1,200 | 39–82 |
| GBH - hydraulic tilt ditching bucket for mini-excavator | GBH-20 · 3 width variants, GBH-30 · 2 width variants | 57–114 SAE | 800–1,200 | 70–113 |
| RGP - skeleton rod GP bucket | RGP-20, RGP-30 · 2 width variants | 62–123 SAE | 600–800 | 40–73 |
| SGP - heavy duty skeleton GP bucket | SGP-20, SGP-30 · 2 width variants | 50–81 SAE | 600–800 | 49–80 |
| GPO - GP bucket with perforated bottom | GPO-20 · 2 width variants, GPO-30 · 2 width variants | 50–81 SAE | 600–800 | 43–64 |
| GPL - general purpose digging bucket | GPL-20 · 5 width variants, GPL-30 · 4 width variants | 20–79 SAE | 250–600 | 16–43 |
| GBP - rigid grading & ditching bucket, Italian profile | GBP-20 · 3 width variants, GBP-30 · 2 width variants | 77–158 SAE | 800–1,200 | 44–85 |
| GBPH - hydraulic tilting grading & ditching bucket | GBPH-20 · 3 width variants, GBPH-30 · 3 width variants | 68–121 SAE | 900–1,200 | 76–103 |
| RGPL - skeleton rod GPL bucket | RGPL-20, RGPL-30 · 2 width variants | 60–110 SAE | 600–800 | 29–55 |
| GPLO - GPL bucket with perforated bottom | GPLO-20 · 2 width variants, GPLO-30 · 2 width variants | 59–110 SAE | 600–800 | 32–55 |
| SGPL - heavy duty skeleton GPL bucket for mini-excavator | SGPL-20, SGPL-30 · 2 width variants | 60–110 SAE | 600–800 | 39–62 |
| BDP mini - clay digging bucket for mini-excavator | BDP-20, BDP-30 | 10–16 SAE | 220–250 | 21–30 |
| SB mini - Dutch profile grading & ditching bucket for mini-excavator | SB-20 · 3 width variants, SB-30 · 4 width variants | 77–131 SAE | 800–1,200 | 43–85 |
| PDP mini - skeleton BDP stone bucket | PDP-20 · 3 width variants, PDP-30 · 3 width variants | 40–130 SAE | 400–800 | 32–66 |
| DS mini - Scandinavian deep digging bucket for mini-excavator | DS-20 · 4 width variants, DS-30 · 3 width variants | 34–114 SAE | 300–600 | 31–60 |
| PS mini - Scandinavian universal grading bucket for mini-excavator | PS-25 · 3 width variants | 112–140 SAE | 1,000–1,200 | 64–77 |
| PSH mini - hydraulic swivelling grading bucket for mini-excavators | PS-25 · 3 width variants | 1,000–1,200 | ||
| KS mini - cable bucket for mini-excavator | KS-20 · 3 width variants | 19–50 SAE | 200–400 | 20–34 |
| KSV mini - Scandinavian profile cable V bucket for mini-excavator | KSV-20 · 3 width variants | 17–57 SAE | 100–300 | 23–40 |
| CB mini - hydraulic clamp bucket for mini-excavator | CBR-20, CBR-30 | 52–83 SAE | 550–600 | 65–80 |
| GKB mini - deep cable digging bucket for mini-excavator | GKB-30 | 150 | 37 | |
| RGPR - skeleton rod bucket | RGPR-20, RGPR-30 | 55–109 SAE | 500–800 | 45–63 |
| RGB - skeleton rod grading & sorting bucket | RGB-30 | 118 SAE | 1,200 | 77 |
| LR mini - straight land rakes for mini-excavator | LR-3 · 2 width variants | 1,000–1,200 | 85–100 | |
| LRS - short land rakes for mini-excavators | LRS-3 | 925 | 70 | |
| RIP mini - ripper shank for mini-excavator | Ripper-2.5 | 21 | ||
| MR mini - multi-ripper for mini-excavator | MRF 25 | 400 | 36 | |
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
| RC - root cutter | Root cutter-2 | 170 | 13 | |
| RRB - root rake bucket profile | RRB-20 | 900 | 80 | |
| QC-S - S-System Scandinavian quick-coupler | QC-S30-H/150, QC-S30-H/180, QC-S30-SA/150, QC-S30-SA/180, QC-U-S30-H/150, QC-U-S30-H/180 | 15–42 | ||
| CW - CW-System compatible quick-coupler | CW-05, CW-U-05 | 25–67 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-01, QC-MS-01, QC-U-HS-01 | 20–46 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-ML-M-30 | 14 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx17u-6-zx19u-6, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the ZX17U-6 / ZX19U-6.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 1,780 – 1,900 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the ZX17U-6 / ZX19U-6.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ZX17U-6 / ZX19U-6.
Send this answer to a colleague or dealer
Hitachi ZX17U-6 / ZX19U-6: GP - general purpose digging bucket (GP-20, GP-30)
ZX17U-6 / ZX19U-6 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 2,190 mm | maker's document (hitachicm.com) |
| Max reach | 3,720 mm | maker's document (hitachicm.com) |
| Max dump height | 2,510 mm | maker's document (hitachicm.com) |
| Arm length | 930 mm | maker's document (hitachicm.com) |
| Main pump flow | 38.4 l/min | maker's document (hitachicm.com) |
| Bucket capacity | 0.02–0.05 m³ | maker's document (hitachicm.com) |
| Bucket width | 250–450 mm | maker's document (hitachicm.com) |
| Transport width | 990 mm | maker's document (hitachicm.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the ZX17U-6 / ZX19U-6 figures mean for its attachments
- The main pump delivers up to 38.4 l/min at 206 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 2,190 mm. That is the deepest trench it can open.
- Its maximum reach is 3,720 mm.
- It dumps at up to 2,510 mm, so a truck or skip side has to sit below that height.
- Its arm is 930 mm long.
- Hitachi lists buckets from 250 to 450 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: GP - general purpose digging bucket (GP-20, GP-30); GPL - general purpose digging bucket (GPL-20, GPL-30); BDP mini - clay digging bucket for mini-excavator (BDP-30); PDP mini - skeleton BDP stone bucket (PDP-20); DS mini - Scandinavian deep digging bucket for mini-excavator (DS-20, DS-30); KS mini - cable bucket for mini-excavator (KS-20); KSV mini - Scandinavian profile cable V bucket for mini-excavator (KSV-20)
- Hitachi lists bucket capacities from 0.02 to 0.05 m³.
- Bucket breakout force is 16 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 3,500 x 990 x 2,380 mm (length, width, height).
- Engine power is 11.5 kW.
Figures as published by Hitachi in its own documents.
How the ZX17U-6 / ZX19U-6 compares with its neighbours
The nearest models by weight, with the difference to the ZX17U-6 / ZX19U-6 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| ZX17U-6 / ZX19U-6 | 1.78 t | 2,190 mm | 38.4 l/min |
| Hitachi ZX19-6 | 1.98 t (+0.2 t) | 2,380 mm (+190) | 38.4 l/min |
| Hitachi ZX10U-6 | 1.21 t (-0.57 t) | 1,780 mm (-410) | 21.2 l/min (-17.2) |
| Atlas AC 17F | 1.78 t | 2,057 mm (-133) | 62 l/min (+23.6) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ZX17U-6 / ZX19U-6: what the brochure names
Features Hitachi names in its own brochure for the ZX17U-6 / ZX19U-6. Some of them may be optional, so check the machine's spec before you order.
- A short tail swing, for work next to walls and traffic.
- An engine that meets EU Stage V.
- Operator protection certified to ROPS and FOPS.
From Hitachi's published brochure. We keep the source document on file.
Questions about the ZX17U-6 / ZX19U-6
- What bucket width fits the ZX17U-6 / ZX19U-6?
- Hitachi lists buckets from 250 to 450 mm wide for it. Pick a width in that range from the sizes above.
Each family shows its candidate models by operating-weight range.
Standard mini-ex buckets set No. 1
- GP - general purpose digging bucket
GP-20 · 5 width variants, GP-30 · 4 width variants
- GB - rigid grading & ditching bucket, German profile
GB-20 · 3 width variants, GB-30 · 2 width variants
- GBH - hydraulic tilt ditching bucket for mini-excavator
GBH-20 · 3 width variants, GBH-30 · 2 width variants
- RGP - skeleton rod GP bucket
RGP-20, RGP-30 · 2 width variants
- SGP - heavy duty skeleton GP bucket
SGP-20, SGP-30 · 2 width variants
- GPO - GP bucket with perforated bottom
GPO-20 · 2 width variants, GPO-30 · 2 width variants
Standard mini-ex buckets set No. 2
- GPL - general purpose digging bucket
GPL-20 · 5 width variants, GPL-30 · 4 width variants
- GBP - rigid grading & ditching bucket, Italian profile
GBP-20 · 3 width variants, GBP-30 · 2 width variants
- GBPH - hydraulic tilting grading & ditching bucket
GBPH-20 · 3 width variants, GBPH-30 · 3 width variants
- RGPL - skeleton rod GPL bucket
RGPL-20, RGPL-30 · 2 width variants
- GPLO - GPL bucket with perforated bottom
GPLO-20 · 2 width variants, GPLO-30 · 2 width variants
- SGPL - heavy duty skeleton GPL bucket for mini-excavator
SGPL-20, SGPL-30 · 2 width variants
Dutch mini-ex buckets set No. 3
- BDP mini - clay digging bucket for mini-excavator
BDP-20, BDP-30
- SB mini - Dutch profile grading & ditching bucket for mini-excavator
SB-20 · 3 width variants, SB-30 · 4 width variants
- PDP mini - skeleton BDP stone bucket
PDP-20 · 3 width variants, PDP-30 · 3 width variants
Nordic mini-ex buckets set No. 4
- DS mini - Scandinavian deep digging bucket for mini-excavator
DS-20 · 4 width variants, DS-30 · 3 width variants
- PS mini - Scandinavian universal grading bucket for mini-excavator
PS-25 · 3 width variants
- PSH mini - hydraulic swivelling grading bucket for mini-excavators
PS-25 · 3 width variants
- KS mini - cable bucket for mini-excavator
KS-20 · 3 width variants
- KSV mini - Scandinavian profile cable V bucket for mini-excavator
KSV-20 · 3 width variants
Other mini-ex attachments
- LR mini - straight land rakes for mini-excavator
LR-3 · 2 width variants
- LRS - short land rakes for mini-excavators
LRS-3
- RIP mini - ripper shank for mini-excavator
Ripper-2.5
- MR mini - multi-ripper for mini-excavator
MRF 25
- GRB light - mini-excavator grading beam with lowered mass
GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants
Also available
- RC - root cutter
Root cutter-2
- RRB - root rake bucket profile
RRB-20
- QC-S - S-System Scandinavian quick-coupler
QC-S30-H/150, QC-S30-H/180, QC-S30-SA/150, QC-S30-SA/180, QC-U-S30-H/150, QC-U-S30-H/180
- CW - CW-System compatible quick-coupler
CW-05, CW-U-05
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-01, QC-MS-01, QC-U-HS-01
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-ML-M-30
Bucket sets for this machine
Sets of one bucket profile that include buckets listed for the Hitachi ZX17U-6 / ZX19U-6. Each set lists the buckets that match the machine's operating weight.
- German-profile set
Buckets in the set for this weight: GP, GB, GBH
- Italian-profile set
Buckets in the set for this weight: GPL, GBP, GBPH
- Nordic-profile set
Buckets in the set for this weight: DS, PS, PSH, KS, KSV
- Dutch-profile set
Buckets in the set for this weight: BDP, SB, PDP
Hitachi ZX17U-6 / ZX19U-6: machine data
- Operating weight
- 1,780 – 1,900 kg
- Engine power
- 11.5 kW
- Maximum digging depth
- 2,190 mm
- Maximum dump height
- 2,510 mm
- Bucket breakout force
- 16 kN
As published by Hitachi, retrieved 2026-09-19. Source
Before you order: check the interface
The weight class of the Hitachi ZX17U-6 / ZX19U-6 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX17U-6 / ZX19U-6 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Hitachi models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX17U-6 / ZX19U-6.
Other Hitachi models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX17U-6 / ZX19U-6.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.