Attachments for the Hitachi ZX26U-6 weight range
Weight Class: Mini Excavator (1–6 t) Operating Weight: 2,650 – 2,740 kg
- Bucket line
- GP - general purpose digging bucket 300–400 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the ZX26U-6
Families to look at first
- GP - general purpose digging bucket 300–400 mm
- GB - rigid grading & ditching bucket, German profile 1,000–1,400 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 1,000–1,500 mm
Quick coupler brackets at this weight
- S30
- S40
- MS01
- MS03
- CW05
- CW10
- OQ40
- HS02
- HS03
- HS06
- Klac C
- Klac D
- Klac E
- M02
- M03
- M10
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the ZX26U-6
Each size below has a catalogue row rated for a carrier of 2,650 – 2,740 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the ZX26U-6.
On a narrow screen the table scrolls sideways.
Buckets
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-4 · 2 width variants | 1,000–1,200 | 127–150 | |
| LRS - short land rakes for mini-excavators | LRS-5 | 1,560 | 130 | |
| RIP mini - ripper shank for mini-excavator | Ripper-5.5 | 51 | ||
| MR mini - multi-ripper for mini-excavator | MRF 40 · 2 width variants | 600–800 | 62–69 | |
| AC mini - asphalt cutter for mini-excavator | AC-6 | 43 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-6 | 365 | 102 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants | 1,000–1,500 | 91–261 | |
Also available | ||||
| RC - root cutter | Root cutter-2 | 170 | 13 | |
| RRB - root rake bucket profile | RRB-40 | 1,200 | 148 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S40-H, QC-S40-H/240, QC-S40-SA, QC-S40-SA/240, QC-U-S40-H, QC-U-S40-H/240 | 30–92 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-05, CW-U-05 | 25–67 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-03, QC-MS-03, QC-U-HS-03 | 30–90 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-ML-M-35 | 22 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Hitachi ZX26U-6 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Hitachi ZX26U-6 at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ZX26U-6.
Send this answer to a colleague or dealer
Hitachi ZX26U-6: GP - general purpose digging bucket (GP-40). Shortlisted by operating weight
Sizes are matched to the published operating weight of the ZX26U-6.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 2,650 – 2,740 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Hitachi, retrieved 2026-09-10. Source
Hitachi ZX26U-6: machine data
- Operating weight
- 2,650 – 2,740 kg
- Engine power
- 15.6 kW
- Maximum digging depth
- 2,730 mm
- Maximum dump height
- 3,030 mm
- Bucket breakout force
- 22.3 kN
- Arm crowd force
- 14.5 kN
- Max reach
- 4,570 mm maker's document (hitachicm.com)
- Arm length
- 1,300 mm maker's document (hitachicm.com)
- Main pump flow
- 60 l/min maker's document (hitachicm.com)
- Bucket capacity
- 0.07–0.08 m³ maker's document (hitachicm.com)
- Bucket width
- 400–450 mm maker's document (hitachicm.com)
- Transport width
- 1,500 mm maker's document (hitachicm.com)
As published by Hitachi, retrieved 2026-09-19. Source
- Pin diameter
- 35 mm Source: Tuff Buckets. From a dealer's table. It does not say which arm or quick coupler was fitted. Listed for another generation of this model.
A guide only. Measure the pins before you order.
What the ZX26U-6 figures mean for its attachments
- The main pump delivers up to 60 l/min at 245 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 2,730 mm. That is the deepest trench it can open.
- Its maximum reach is 4,570 mm.
- It dumps at up to 3,030 mm, so a truck or skip side has to sit below that height.
- Its arm is 1,300 mm long.
- Hitachi lists buckets from 400 to 450 mm wide for this machine.Our sizes in that range: GP - general purpose digging bucket (GP-40); GPL - general purpose digging bucket (GPL-40); BDP mini - clay digging bucket for mini-excavator (BDP-40); DS mini - Scandinavian deep digging bucket for mini-excavator (DS-50); KS mini - cable bucket for mini-excavator (KS-20)
- Hitachi lists bucket capacities from 0.07 to 0.08 m³.
- Bucket breakout force is 22.3 kN and arm crowd force 14.5 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 4,180 x 1,500 x 2,430 mm (length, width, height).
- Engine power is 15.6 kW.
Figures as published by Hitachi in its own documents.
How the ZX26U-6 compares with its neighbours
The nearest models by weight, with the difference to the ZX26U-6 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| ZX26U-6 | 2.65 t | 2,730 mm | 60 l/min |
| Hitachi ZX19-6 | 1.98 t (-0.67 t) | 2,380 mm (-350) | 38.4 l/min (-21.6) |
| Hitachi ZX33U-6 | 3.35 t (+0.7 t) | 3,130 mm (+400) | 76.8 l/min (+16.8) |
| Atlas AC 25F | 2.64 t (-0.01 t) | 2,705 mm (-25) | 77 l/min (+17) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ZX26U-6: build years and variants
Build years: 2019–2026
Variants
- ZX26U-6 (2019–2026)
Years and variants as listed in the LECTURA Specs database.
ZX26U-6: what the brochure names
Features Hitachi names in its own brochure for the ZX26U-6. Some of them may be optional, so check the machine's spec before you order.
- A short tail swing, for work next to walls and traffic.
- An engine that meets EU Stage V.
- A dozer blade.
- Operator protection certified to ROPS and FOPS.
From Hitachi's published brochure. We keep the source document on file.
Other Hitachi models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Hitachi ZX26U-6.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Hitachi ZX26U-6.
Questions about the ZX26U-6
- What bucket width fits the ZX26U-6?
- Hitachi lists buckets from 400 to 450 mm wide for it. Pick a width in that range.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/hitachi/hitachi-zx26u-6, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Hitachi machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.