Attachments for the JCB 110W weight range
- Bucket line
- DB - heavy duty digging bucket500–1200 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the 110W
Each size below has a catalogue row rated for a carrier of 13,500 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/jcb/jcb-110w, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the 110W.
- Weight Class
- Large Excavator (12–30 t)
- Operating Weight
- 13,500 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by JCB, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the 110W.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the 110W.
Send this answer to a colleague or dealer
JCB 110W: DBF - flat-top digging bucket for quick coupler (DBF-160)
110W at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 4,410 mm | maker's website (jcb.com) |
| Max reach | 7,785 mm | maker's document (greenshieldsjcb.com) |
| Max dump height | 6,965 mm | maker's document (greenshieldsjcb.com) |
| Arm length | 1,650–2,250 mm | maker's document (greenshieldsjcb.com) |
| Main pump flow | 158.4 l/min | maker's document (greenshieldsjcb.com) |
| Auxiliary flow | 120 l/min | maker's document (greenshieldsjcb.com) |
| Auxiliary pressure | 210 bar | maker's document (greenshieldsjcb.com) |
| Bucket capacity | 0.06–0.31 m³ | maker's document (greenshieldsjcb.com) |
| Bucket width | 250–900 mm | maker's document (greenshieldsjcb.com) |
| Lift capacity | 5,000 kg | maker's document (greenshieldsjcb.com) |
| Transport width | 2,440 mm | maker's document (greenshieldsjcb.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the 110W figures mean for its attachments
- Its auxiliary circuit is rated at 120 l/min and 210 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 158.4 l/min at 280 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 4,410 mm. That is the deepest trench it can open.
- Its maximum reach is 7,785 mm.
- It dumps at up to 6,965 mm, so a truck or skip side has to sit below that height.
- JCB offers arms from 1,650 to 2,250 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- JCB lists buckets from 250 to 900 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: DB - heavy duty digging bucket (DB-160); DBF - flat-top digging bucket for quick coupler (DBF-160)
- JCB lists bucket capacities from 0.06 to 0.31 m³.
- JCB gives a lifting capacity of 5,000 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 1,200 mm, which matters beside a wall or in a live traffic lane.
- Its transport width is 2,440 mm.
- Engine power is 81 kW.
Figures as published by JCB in its own documents.
How the 110W compares with its neighbours
The nearest models by weight, with the difference to the 110W in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| 110W | 13.5 t | 4,410 mm | 158.4 l/min |
| JCB 131X | 14.819 t (+1.319 t) | 6,060 mm (+1,650) | 260 l/min (+101.6) |
| JCB 140X | 15.275 t (+1.775 t) | 6,060 mm (+1,650) | 260 l/min (+101.6) |
| Komatsu PC138US-8 | 13.5 t | 5,900 mm (+1,490) | 242 l/min (+83.6) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Questions about the 110W
- What bucket width fits the 110W?
- JCB lists buckets from 250 to 900 mm wide for it. Pick a width in that range from the sizes above.
- Can the 110W run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 120 l/min at 210 bar.
Each family shows its candidate models by operating-weight range.
Digging & sorting buckets
- DB - heavy duty digging bucket
DB-160 · 5 width variants
- SDB - heavy duty skeleton DB bucket
SDB-160 · 2 width variants
- DBF - flat-top digging bucket for quick coupler
DBF-160 · 5 width variants
- RDBF - flat-top skeleton DBF bucket on rods
RDBF-160 · 2 width variants
Ditching, grading, sloping buckets
- GD - rigid grading & ditching bucket, 12–40 t
GD-160 · 3 width variants
- GDH - heavy duty hydraulic grading & ditching bucket
GDH-160 · 3 width variants
- SB - Dutch profile grading & ditching bucket
SB-160 · 4 width variants
- DCB - grading & ditching bucket with round profile
DCB-160 · 3 width variants
- PS - Scandinavian universal / grading bucket
PS-160 · 5 width variants
- PSH - hydraulic swivelling grading bucket
PS-160 · 5 width variants
Non-bucket attachments
- TH - hydraulic thumb for excavator
TH-16
- AC - excavator asphalt cutters
AC-18
- MR - heavy duty excavator multi-ripper
MR-17
- DuoRIP - double ripper for root extraction
Duo-Ripper-18
- GRB - excavator grading beam
GRB midi · 6 variants, GRB maxi · 6 variants
Other mini-ex attachments
- LRS - short land rakes for mini-excavators
LRS-15
- RIP mini - ripper shank for mini-excavator
Ripper-14
- MR mini - multi-ripper for mini-excavator
MRF 140 · 2 width variants
- QC-S - S-System Scandinavian quick-coupler
QC-S60, QC-U-S60
- CW - CW-System compatible quick-coupler
CW-20, CW-20 S, CW-U-20, CW-U-20 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-10, QC-MS-10, QC-U-HS-10
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-65, QC-ML-M-60, QC-U-PG-65
JCB 110W: machine data
- Operating weight
- 13,500 kg
- Engine power
- 81 kW
- Maximum digging depth
- 4,410 mm
- Maximum dump height
- 6,965 mm
- Tail swing radius
- 1,200 mm
- Auxiliary circuit flow
- 120 l/min
- Auxiliary circuit pressure
- 210 bar
As published by JCB, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the JCB 110W sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
At this weight the choice is mostly about the material. A general purpose bucket suits soil and gravel, a reinforced bucket with thicker wear parts suits mixed ground and broken rock, and the quick coupler on the machine sets the bracket every attachment needs.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the JCB 110W at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other JCB models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the JCB 110W.
Other JCB models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for JCB 110W.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell JCB machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.