Attachments for the Liebherr A 914 Litronic (14,900 – 17,200 kg) weight range
Based on the A 914 Litronic (14,900 – 17,200 kg) operating-weight range. Final interface, geometry and hydraulic fit is confirmed by our engineers with the quote.
- Weight Class
- Standard Excavator (12–30 t)
- Operating Weight
- 14,900 – 17,200 kg
Operating weight as published by Liebherr, retrieved 2026-09-10. Source
StandardEarthmoving / heavy duty
DB - heavy duty digging bucket
The classic digging bucket for most materials, with a rock version for harder ground.
Candidate models by operating-weight range: DB-160 · 5 width variants, DB-190 · 5 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 225–1,164
Standard
SDB - heavy duty skeleton DB bucket
The SDB separates material as you dig. Its interlocking ribs sort and sift different materials.
Candidate models by operating-weight range: SDB-160 · 2 width variants, SDB-230 · 2 width variants
These models suit machines of 12–24 tCapacity SAE [dm³]: 543–1,290
Standard
DBF - flat-top digging bucket for quick coupler
The flat top suits excavators that change attachments on a quick coupler. With Economy, Standard, Heavy Duty and Rock versions, one shape covers most kinds of soil.
Candidate models by operating-weight range: DBF-160 · 5 width variants, DBF-190 · 5 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 250–1,102
Standard
RDBF - flat-top skeleton DBF bucket on rods
Interlocking steel rods replace the solid bottom, C45 as standard and Hardox® as an option. Soil sifts out from the rocks while you dig trenches, drains and pipe bedding.
Candidate models by operating-weight range: RDBF-160 · 2 width variants, RDBF-190 · 3 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 615–1,100
Standard
DSX - Nordic heavy duty digging bucket
Nordic deep digging buckets for excavators dig deep in hard and difficult soil. (Djupskopa / Graveskovl / Kuokkakauha)
Candidate models by operating-weight range: DS-HD-190 · 3 width variants
These models suit machines of 14–19 tCapacity SAE [dm³]: 570–982
Standard
GD - rigid grading & ditching bucket
The rigid body has no tilt joint, which gives good control over the cut. It leaves a clean finish when you grade surfaces and clean ditches.
Candidate models by operating-weight range: GD-160 · 3 width variants, GD-190 · 3 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 484–692
Standard
GDH - heavy duty hydraulic grading & ditching bucket
Hydraulic tilt grading buckets shape slopes and leave a level finish on uneven ground.
Candidate models by operating-weight range: GDH-160 · 3 width variants, GDH-190 · 3 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 456–685
Standard
SB - Dutch profile grading & ditching bucket
The Dutch profile has a wider opening, so sticky soil falls out easily. Use it for grading and ditch work in sticky soil. (slotenbak)
Candidate models by operating-weight range: SB-160 · 4 width variants, SB-190 · 4 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 583–1,045
Standard
DCB - grading & ditching bucket with round profile
The round profile lets material flow out with little drag. Use it to grade surfaces and to dig and clean ditches.
Candidate models by operating-weight range: DCB-160 · 3 width variants, DCB-190 · 3 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 454–680
Standard
PS - Scandinavian universal / grading bucket
A Scandinavian grading profile that also works on a tiltrotator. It grades and levels many kinds of surface with good control over the cut. (Planeringsskopa / Planerskovl / Luiskakauha)
Candidate models by operating-weight range: PS-160 · 5 width variants, PS-190 · 4 width variants
These models suit machines of 12–19 tCapacity SAE [dm³]: 744–1,228
Standard
PSH - hydraulic swivelling grading bucket
A cylinder swivels the PS bucket, so you set the angle of the cutting edge from the cab. It grades slopes and verges while the machine stays where it is. (Planeringsskopa / Planerskovl / Luiskakauha)
Candidate models by operating-weight range: PS-160 · 5 width variants, PS-190 · 4 width variants
These models suit machines of 12–19 t
Standard
CB - heavy duty hydraulic clamp bucket
A hydraulic clamp arm closes onto the load, and a double pilot check valve holds it shut if a hose fails. The excavator digs, then picks up rubble, stumps, pipes and awkward stone.
Candidate models by operating-weight range: CBR-190
These models suit machines of 12–19 tCapacity [dm³]: 803
Standard
RGB - skeleton rod grading & sorting bucket
A rod floor lets fines fall through while stones, rubble and roots stay in the bucket. Material is sorted, graded and reused on site without a separate screen.
Candidate models by operating-weight range: RGB-160
These models suit machines of 12–16 tCapacity SAE [dm³]: 593
Standard
QC-S - S-System Scandinavian quick-coupler
A rear mechanical safety lock and a pilot-operated check valve hold the attachment, and a visual indicator shows it is engaged. The fully automatic version changes S-system buckets and tools from the cab.
Candidate models by operating-weight range: QC-S60, QC-U-S60
These models suit machines of 12–20 t
Standard
CW - CW-System compatible quick-coupler
The proven wedge design keeps breakout force high, and a pilot-operated check valve secures the attachment. It takes CW-system brackets in manual, automatic and tilt/swivel versions.
Candidate models by operating-weight range: CW-20, CW-20 S, CW-30, CW-30 S, CW-U-20, CW-U-20 S, CW-U-30, CW-U-30 S
These models suit machines of 7.5–25 t
Standard
QC-HS / QC-MS - MS-System compatible quick-coupler
A CNC-machined cast steel body with front and rear mechanical safety locks. It picks up MS and SY system attachments in automatic, mechanical and tilt/swivel versions.
Candidate models by operating-weight range: QC-HS-10, QC-MS-10, QC-U-HS-10
These models suit machines of 10–19 t
Standard
QC-PG - pin-grabber quick-coupler for factory brackets
It picks up the excavator maker's own bracket, and the variable pin-centre models take many different OEM attachments. One coupler works your existing buckets without new brackets.
Candidate models by operating-weight range: QC-PG-65, QC-PG-70, QC-PG-80, QC-ML-M-60, QC-ML-M-65, QC-U-PG-65, QC-U-PG-70, QC-U-PG-80
These models suit machines of 11–29 t
Standard
TH - hydraulic thumb for excavator
The thumb grips against the bucket and folds back against the stick when you do not need it. The excavator picks up and holds rocks, logs, pipes and debris.
Candidate models by operating-weight range: TH-16, TH-19
These models suit machines of 10–19 t
Standard
AC - excavator asphalt cutters
A 450 mm steel disc, symmetrical (ACs) or asymmetrical (ACa). It makes clean cuts in asphalt for road repairs, utility trenches and pavement and kerb work.
Candidate models by operating-weight range: AC-18
These models suit machines of 12–18 t
Standard
MR - heavy duty excavator multi-ripper
The Multi Ripper goes into the ground at several points at once to break up and loosen compacted material.
Candidate models by operating-weight range: MR-17
These models suit machines of 11–17 t
Standard
RIP - heavy duty ripper
A single shank made of high-strength material, so it wears less. It breaks up tough soil, rock and frozen ground so the material is easier to load.
Candidate models by operating-weight range: Ripper-C
These models suit machines of 14–18 t
Standard
DuoRIP - double ripper for root extraction
Two shanks go deep into the ground at once. It rips out root systems, large roots and stumps when land is cleared for a site.
Candidate models by operating-weight range: Duo-Ripper-18
These models suit machines of 12–18 t
Standard
GRB - excavator grading beam
A grading bar on your excavator levels large areas to a smooth, even finish for driveways, roads and building sites.
Candidate models by operating-weight range: GRB midi · 6 variants, GRB maxi · 6 variants
These models suit machines of 6–30 t
Standard
LRS - short land rakes for mini-excavators
A shorter, narrower land rake that stays easy to handle on small machines in tight plots and along boundaries. It pulls out roots and stones and lets the soil fall through.
Candidate models by operating-weight range: LRS-15
These models suit machines of 7–15 t
Liebherr A 914 Litronic (14,900 – 17,200 kg): machine data
- Engine power
- 105 kW
As published by Liebherr, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Liebherr A 914 Litronic (14,900 – 17,200 kg) sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Liebherr models of a similar weight
- Liebherr R 915 Compact Litronic15t – 17t
- Liebherr A 914 Compact Litronic (15,200 – 17,500 kg)15t – 18t
- Liebherr A 915 Compact Litronic15t – 17t
- Liebherr A 913 Compact Litronic (13,900 – 16,000 kg)14t – 16t
- Liebherr A 916 Compact Litronic (16,000 – 18,300 kg)16t – 18t
- Liebherr R 917 Compact Litronic16t – 18t
Other makes of a similar weight
Operating weight within 2 t of the Liebherr A 914 Litronic (14,900 – 17,200 kg).
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Liebherr A 914 Litronic (14,900 – 17,200 kg).
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.