Attachments for the Bobcat E55z weight range
Weight Class: Mini Excavator (1–6 t) Operating Weight: 5,271 kg
- Bucket line
- GP - general purpose digging bucket 300–1,000 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the E55z
Families to look at first
- GP - general purpose digging bucket 300–1,000 mm
- GB - rigid grading & ditching bucket, German profile 1,200–1,600 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 1,200–1,600 mm
Quick coupler brackets at this weight
- S40
- S45
- MS03
- MS08
- CW05
- CW10
- OQ40
- OQ45
- HS03
- HS06
- HS08
- Klac D
- Klac E
- Klac F
- M03
- M10
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the E55z
Each size below has a catalogue row rated for a carrier of 5,271 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the E55z.
On a narrow screen the table scrolls sideways.
Buckets
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-6 · 2 width variants | 1,000–1,200 | 158–187 | |
| LRS - short land rakes for mini-excavators | LRS-7 | 1,980 | 155 | |
| RIP mini - ripper shank for mini-excavator | Ripper-5.5 | 51 | ||
| MR mini - multi-ripper for mini-excavator | MRF 75 · 2 width variants | 800–1,000 | 117–121 | |
| AC mini - asphalt cutter for mini-excavator | AC-6 | 43 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-6 | 365 | 102 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants | 1,000–1,500 | 91–261 | |
Also available | ||||
| RC - root cutter | Root cutter-6 | 200 | 20 | |
| RRB - root rake bucket profile | RRB-60 | 1,500 | 222 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S40-H, QC-S40-H/240, QC-S45-H, QC-S50, QC-S40-SA, QC-S40-SA/240, QC-S45-SA, QC-U-S40-H, QC-U-S40-H/240, QC-U-S45-H, QC-U-S50 | 30–232 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-10, CW-U-10 | 65–179 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-03, QC-MS-03, QC-U-HS-03 | 30–90 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-PG-50, QC-ML-M-45, QC-U-PG-50 | 45–204 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Bobcat E55z sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Bobcat E55z at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the E55z.
Send this answer to a colleague or dealer
Bobcat E55z: GP - general purpose digging bucket (GP-60). Shortlisted by operating weight
Sizes are matched to the published operating weight of the E55z.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 5,271 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Bobcat, retrieved 2026-09-10. Source
Bobcat E55z: machine data
- Operating weight
- 5,271 kg
- Engine power
- 36.4 kW
- Maximum digging depth
- 3,434 mm
- Bucket breakout force
- 44.297 kN document from res.cloudinary.com
- Arm crowd force
- 30.993 kN document from res.cloudinary.com
- Auxiliary circuit flow
- 80.5 l/min document from res.cloudinary.com
- Main pump flow
- 138.6 l/min document from res.cloudinary.com
- Transport width
- 1,960 mm document from lectura-specs.com
As published by Bobcat, retrieved 2026-09-17. Source
What the E55z figures mean for its attachments
- Its auxiliary circuit delivers 80.5 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.document from res.cloudinary.com
- The main pump delivers up to 138.6 l/min at 250 bar. That is the pump output of the whole machine, not the flow an attachment gets.document from res.cloudinary.com
- It digs down to 3,434 mm. That is the deepest trench it can open.
- Bucket breakout force is 44.297 kN and arm crowd force 30.993 kN. That is the force a bucket or ripper works with at the tooth.document from res.cloudinary.com
- Its transport width is 1,960 mm.document from lectura-specs.com
- Engine power is 36.4 kW.
Figures without a source note are as published by Bobcat in its own documents.
How the E55z compares with its neighbours
The nearest models by weight, with the difference to the E55z in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| E55z | 5.271 t | 3,434 mm | 138.6 l/min | 80.5 l/min |
| Bobcat E50z | 4.9 t (-0.371 t) | 3,553 mm (+119) | 99 l/min (-39.6) | 78.2 l/min (-2.3) |
| Bobcat E35z | 3.499 t (-1.772 t) | 3,117 mm (-317) | not published | 63.9 l/min (-16.6) |
| Komatsu PC55MR-5 | 5.26 t (-0.011 t) | 4,130 mm (+696) | not published | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
E55z: build years and variants
Build years: 2022–2026
Variants
- E55z (2022–2026)
Years and variants as listed in the LECTURA Specs database.
E55z: what the brochure names
Features Bobcat names in its own brochure for the E55z. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Automatic engine idle when the controls are left alone.
- Boom swing, for digging along walls and around obstacles.
- A zero tail swing: the rear stays inside the tracks when the upper slews.
From Bobcat's published brochure. We keep the source document on file.
Other Bobcat models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Bobcat E55z.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Bobcat E55z.
Questions about the E55z
- Can the E55z run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 80.5 l/min of its auxiliary circuit.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/bobcat/bobcat-e55z, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Bobcat machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.