Attachments for the Kobelco SK75SR-3 weight range
- Bucket line
- GP - general purpose digging bucket300–1000 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the SK75SR-3
Each size below has a catalogue row rated for a carrier of 7,440 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/kobelco/kobelco-sk75sr-3, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the SK75SR-3.
- Weight Class
- Midi Excavator (6–12 t)
- Operating Weight
- 7,440 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Kobelco, retrieved 2026-09-10. Source
Start here
The attachments buyers in your market ask for first, sized for the SK75SR-3.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the SK75SR-3.
Send this answer to a colleague or dealer
Kobelco SK75SR-3: GP - general purpose digging bucket (GP-95)
SK75SR-3 at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 4,160 mm | maker's website (kobelco-europe.com) |
| Max reach | 6,760 mm | maker's document (kobelco-europe.com) |
| Max dump height | 5,340 mm | maker's website (kobelco-europe.com) |
| Arm length | 1,710–2,130 mm | maker's document (kobelco-europe.com) |
| Main pump flow | 132 l/min | maker's document (kobelco-europe.com) |
| Bucket capacity | 0.22–0.35 m³ | maker's document (kobelco-europe.com) |
| Bucket width | 580–850 mm | maker's document (kobelco-europe.com) |
| Lift capacity | 2,560 kg | maker's document (kobelco-europe.com) |
| Transport width | 2,300 mm | maker's document (kobelco-europe.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the SK75SR-3 figures mean for its attachments
- The main pump delivers up to 132 l/min at 329 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 4,160 mm. That is the deepest trench it can open.
- Its maximum reach is 6,760 mm.
- It dumps at up to 5,340 mm, so a truck or skip side has to sit below that height.
- Kobelco offers arms from 1,710 to 2,130 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Kobelco lists buckets from 580 to 850 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: GP - general purpose digging bucket (GP-95); GPO - GP bucket with perforated bottom (GPO-95); GPL - general purpose digging bucket (GPL-75); GPLO - GPL bucket with perforated bottom (GPLO-75); PDP mini - skeleton BDP stone bucket (PDP-75); DS mini - Scandinavian deep digging bucket for mini-excavator (DS-90); CB mini - hydraulic clamp bucket for mini-excavator (CBR-90)
- Kobelco lists bucket capacities from 0.22 to 0.35 m³.
- Bucket breakout force is 52.7 kN and arm crowd force 39.4 kN. That is the force a bucket or ripper works with at the tooth.
- Kobelco gives a lifting capacity of 2,560 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Its tail swing radius is 1,290 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 5,830 x 2,300 x 2,550 mm (length, width, height).
- Engine power is 41 kW.
Figures as published by Kobelco in its own documents.
How the SK75SR-3 compares with its neighbours
The nearest models by weight, with the difference to the SK75SR-3 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| SK75SR-3 | 7.44 t | 4,160 mm | 132 l/min |
| Kobelco SK75SR-7E | 8.23 t (+0.79 t) | 4,580 mm (+420) | 145 l/min (+13) |
| Kobelco SK85MSR-7E | 8.6 t (+1.16 t) | 4,570 mm (+410) | 145 l/min (+13) |
| Komatsu PC78US-8 | 7.37 t (-0.07 t) | 4,710 mm (+550) | 160 l/min (+28) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
SK75SR-3: what the brochure names
Features Kobelco names in its own brochure for the SK75SR-3. Some of them may be optional, so check the machine's spec before you order.
- Automatic engine idle when the controls are left alone.
- Work modes you select from the cab.
- Two-speed travel.
- Operator protection certified to ROPS and FOPS.
From Kobelco's published brochure. We keep the source document on file.
Questions about the SK75SR-3
- What bucket width fits the SK75SR-3?
- Kobelco lists buckets from 580 to 850 mm wide for it. Pick a width in that range from the sizes above.
Each family shows its candidate models by operating-weight range.
Non-bucket attachments
- DuoRIP - double ripper for root extraction
Duo-Ripper-12
- GRB - excavator grading beam
GRB-MINI · 4 variants, GRBH-MINI · 2 width variants, GRB midi · 6 variants
Also available
- RC - root cutter
Root cutter-10
- RRB - root rake bucket profile
RRB-90
Other mini-ex attachments
- LR mini - straight land rakes for mini-excavator
LR-8 · 2 width variants
- LRS - short land rakes for mini-excavators
LRS-15
- RIP mini - ripper shank for mini-excavator
Ripper-10
- MR mini - multi-ripper for mini-excavator
MRF 75 · 2 width variants
- AC mini - asphalt cutter for mini-excavator
AC-10
Standard mini-ex buckets set No. 1
- GP - general purpose digging bucket
GP-95 · 6 width variants
- GB - rigid grading & ditching bucket, German profile
GB-90 · 3 width variants
- GBH - hydraulic tilt ditching bucket for mini-excavator
GBH-90 · 3 width variants
- RGP - skeleton rod GP bucket
RGP-95
- SGP - heavy duty skeleton GP bucket
SGP-95
- GPO - GP bucket with perforated bottom
GPO-95 · 2 width variants
Standard mini-ex buckets set No. 2
- GPL - general purpose digging bucket
GPL-75 · 6 width variants
- GBP - rigid grading & ditching bucket, Italian profile
GBP-75 · 4 width variants
- GBPH - hydraulic tilting grading & ditching bucket
GBPH-75 · 4 width variants
- RGPL - skeleton rod GPL bucket
RGPL-75
- GPLO - GPL bucket with perforated bottom
GPLO-75 · 3 width variants
- SGPL - heavy duty skeleton GPL bucket for mini-excavator
SGPL-75
Dutch mini-ex buckets set No. 3
- BDP mini - clay digging bucket for mini-excavator
BDP-90 · 2 width variants
- SB mini - Dutch profile grading & ditching bucket for mini-excavator
SB-75 · 5 width variants
- PDP mini - skeleton BDP stone bucket
PDP-75 · 3 width variants
Nordic mini-ex buckets set No. 4
- DS mini - Scandinavian deep digging bucket for mini-excavator
DS-90 · 4 width variants
- PS mini - Scandinavian universal grading bucket for mini-excavator
PS-80 · 5 width variants
- PSH mini - hydraulic swivelling grading bucket for mini-excavators
PS-80 · 5 width variants
- KS mini - cable bucket for mini-excavator
KS-100 · 3 width variants
- KSV mini - Scandinavian profile cable V bucket for mini-excavator
KSV-100 · 3 width variants
- QC-S - S-System Scandinavian quick-coupler
QC-S45-H, QC-S50, QC-S45-SA, QC-U-S45-H, QC-U-S50
- CW - CW-System compatible quick-coupler
CW-10, CW-U-10
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-08, QC-MS-08, QC-U-HS-08
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-50, QC-PG-55, QC-PG-60, QC-ML-M-45, QC-U-PG-50, QC-U-PG-55, QC-U-PG-60
Bucket sets for this machine
Sets of one bucket profile that include buckets listed for the Kobelco SK75SR-3. Each set lists the buckets that match the machine's operating weight.
- German-profile set
Buckets in the set for this weight: GP, GB, GBH
- Italian-profile set
Buckets in the set for this weight: GPL, GBP, GBPH
- Nordic-profile set
Buckets in the set for this weight: DS, PS, PSH, KS, KSV
- Dutch-profile set
Buckets in the set for this weight: BDP, SB, PDP
Kobelco SK75SR-3: machine data
- Operating weight
- 7,440 kg
- Engine power
- 41 kW
- Maximum digging depth
- 4,160 mm
- Maximum dump height
- 5,340 mm
- Bucket breakout force
- 52.7 kN
- Arm crowd force
- 39.4 kN
- Tail swing radius
- 1,290 mm
As published by Kobelco, retrieved 2026-09-18. Source
Before you order: check the interface
The weight class of the Kobelco SK75SR-3 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A midi excavator is often the main machine on a site, trenching, loading and grading in the same day. Buyers usually start with a general purpose bucket, a grading bucket and a quick coupler, then add other tools when the work calls for them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Kobelco SK75SR-3 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Kobelco models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Kobelco SK75SR-3.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Kobelco SK75SR-3.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Kobelco machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.