Attachments for the Komatsu PC22MR-3 weight range
- Bucket line
- GP - general purpose digging bucket300–500 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the PC22MR-3
Each size below has a catalogue row rated for a carrier of 2,250 – 2,550 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the PC22MR-3.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Standard mini-ex buckets set No. 1 | ||||
| GP - general purpose digging bucketStart herePrice & lead timeGet price & lead time | GP-30 · 3 width variants, GP-40 · 2 width variants | 36–71 | 300–500 | 33–56 |
| GB - rigid grading & ditching bucket, German profileStart herePrice & lead timeGet price & lead time | GB-30 · 2 width variants, GB-40 · 3 width variants | 93–176 | 1,000–1,400 | 70–107 |
| GBH - hydraulic tilt ditching bucket for mini-excavatorStart herePrice & lead timeGet price & lead time | GBH-30 · 2 width variants, GBH-40 · 4 width variants | 93–190 | 1,000–1,500 | 101–162 |
| RGP - skeleton rod GP bucket | RGP-30 · 2 width variants, RGP-40 · 2 width variants | 87–206 | 600–1,000 | 58–116 |
| SGP - heavy duty skeleton GP bucket | SGP-30 · 2 width variants, SGP-40 · 2 width variants | 64–128 | 600–1,000 | 64–129 |
| GPO - GP bucket with perforated bottom | GPO-30 · 2 width variants, GPO-40 | 64–85 | 600–800 | 52–70 |
Standard mini-ex buckets set No. 2 | ||||
| GPL - general purpose digging bucket | GPL-30 · 4 width variants, GPL-40 · 3 width variants | 33–82 | 300–600 | 26–49 |
| GBP - rigid grading & ditching bucket, Italian profile | GBP-30 · 2 width variants, GBP-40 · 3 width variants | 129–187 | 1,000–1,400 | 72–98 |
| GBPH - hydraulic tilting grading & ditching bucket | GBPH-30 · 3 width variants, GBPH-40 · 3 width variants | 88–201 | 900–1,500 | 88–167 |
| RGPL - skeleton rod GPL bucket | RGPL-30 · 2 width variants, RGPL-40 · 2 width variants | 79–186 | 600–1,000 | 44–81 |
| GPLO - GPL bucket with perforated bottom | GPLO-30 | 79 | 600 | 43 |
| SGPL - heavy duty skeleton GPL bucket for mini-excavator | SGPL-30 · 2 width variants, SGPL-40 · 2 width variants | 79–186 | 600–1,000 | 48–87 |
Dutch mini-ex buckets set No. 3 | ||||
| BDP mini - clay digging bucket for mini-excavator | BDP-30, BDP-40 · 2 width variants | 16–40 | 250–400 | 30–60 |
| SB mini - Dutch profile grading & ditching bucket for mini-excavator | SB-30 · 4 width variants, SB-40 · 3 width variants | 97–184 | 900–1,200 | 65–109 |
| PDP mini - skeleton BDP stone bucket | PDP-30 · 3 width variants, PDP-40 · 4 width variants | 93–232 | 600–1,000 | 53–107 |
Nordic mini-ex buckets set No. 4 | ||||
| DS mini - Scandinavian deep digging bucket for mini-excavator | DS-30, DS-50 | 66–75 | 400 | 44–57 |
| PS mini - Scandinavian universal grading bucket for mini-excavator | PS-25 · 3 width variants, PS-60 · 3 width variants | 112–254 | 1,000–1,400 | 64–130 |
| PSH mini - hydraulic swivelling grading bucket for mini-excavators | PS-25 · 3 width variants, PS-60 · 3 width variants | On request | 1,000–1,400 | On request |
| KS mini - cable bucket for mini-excavator | KS-20 · 3 width variants | 19–50 | 200–400 | 20–34 |
| KSV mini - Scandinavian profile cable V bucket for mini-excavator | KSV-20 · 3 width variants | 17–57 | 100–300 | 23–40 |
Special use mini-ex buckets | ||||
| CB mini - hydraulic clamp bucket for mini-excavator | CBR-30, CBR-40 | 83–113 | 600 | 80–107 |
| GKB mini - deep cable digging bucket for mini-excavator | GKB-30 | 150 | 37 | |
| RGPR - skeleton rod bucket | RGPR-30, RGPR-40 | 109–157 | 800–1,000 | 63–94 |
| RGB - skeleton rod grading & sorting bucket | RGB-30, RGB-40 | 118–200 | 1,200–1,400 | 77–108 |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-3 · 2 width variants, LR-4 · 2 width variants | 1,000–1,200 | 85–150 | |
| LRS - short land rakes for mini-excavators | LRS-3, LRS-5 | 925–1,560 | 70–130 | |
| RIP mini - ripper shank for mini-excavator | Ripper-2.5, Ripper-5.5 | 21–51 | ||
| MR mini - multi-ripper for mini-excavator | MRF 25, MRF 40 · 2 width variants | 400–800 | 36–69 | |
| AC mini - asphalt cutter for mini-excavator | AC-6 | 43 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-6 | 365 | 102 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants | 1,000–1,500 | 91–261 | |
Also available | ||||
| RC - root cutter | Root cutter-2 | 170 | 13 | |
| RRB - root rake bucket profile | RRB-40 | 1,200 | 148 | |
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S40-H, QC-S40-H/240, QC-S40-SA, QC-S40-SA/240, QC-U-S40-H, QC-U-S40-H/240 | 30–92 | ||
| CW - CW-System compatible quick-couplerCW-System | CW-05, CW-U-05 | 25–67 | ||
| QC-HS / QC-MS - MS-System compatible quick-couplerMS system | QC-HS-03, QC-MS-03, QC-U-HS-03 | 30–90 | ||
| QC-PG - pin-grabber quick-coupler for factory bracketsPin-grabber | QC-ML-M-35 | 22 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Komatsu PC22MR-3 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Komatsu PC22MR-3 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the PC22MR-3.
Send this answer to a colleague or dealer
Komatsu PC22MR-3: GP - general purpose digging bucket (GP-30, GP-40)
Sizes are matched to the published operating weight of the PC22MR-3.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 2,250 – 2,550 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Komatsu, retrieved 2026-09-10. Source
Komatsu PC22MR-3: machine data
- Operating weight
- 2,250 – 2,550 kg
- Engine power
- 15.7 kW
- Maximum digging depth
- 2,580 mm
- Bucket breakout force
- 18.8 kN
- Quick coupler
- Komatsu quick-coupler
- Arm length
- 970–1,320 mmmaker's document (komatsu.eu)
- Main pump flow
- 55 l/minmaker's document (komatsu.eu)
- Bucket capacity
- 0.035–0.085 m³maker's document (komatsu.eu)
- Bucket width
- 250–550 mmmaker's document (komatsu.eu)
- Lift capacity
- 1,570 kgmaker's document (komatsu.eu)
As published by Komatsu, retrieved 2026-09-17. Source
What the PC22MR-3 figures mean for its attachments
- The main pump delivers up to 55 l/min at 245 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Komatsu lists this quick coupler for it: Komatsu quick-coupler. The bracket on every attachment has to match the coupler.
- It digs down to 2,580 mm. That is the deepest trench it can open.
- Komatsu offers arms from 970 to 1,320 mm. A longer arm reaches further, a shorter one handles a heavier bucket.
- Komatsu lists buckets from 250 to 550 mm wide for this machine.Our sizes in that range: GP - general purpose digging bucket (GP-30, GP-40); GPL - general purpose digging bucket (GPL-30, GPL-40); BDP mini - clay digging bucket for mini-excavator (BDP-30, BDP-40); DS mini - Scandinavian deep digging bucket for mini-excavator (DS-30, DS-50); KS mini - cable bucket for mini-excavator (KS-20); KSV mini - Scandinavian profile cable V bucket for mini-excavator (KSV-20)
- Komatsu lists bucket capacities from 0.035 to 0.085 m³.
- Bucket breakout force is 18.8 kN. That is the force a bucket or ripper works with at the tooth.
- Komatsu gives a lifting capacity of 1,570 kg. Check a heavy grab or hammer, plus its load, against the full load chart.
- Engine power is 15.7 kW.
Figures as published by Komatsu in its own documents.
How the PC22MR-3 compares with its neighbours
The nearest models by weight, with the difference to the PC22MR-3 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| PC22MR-3 | 2.25 t | 2,580 mm | 55 l/min |
| Komatsu PC20 MRx | 2.29 t (+0.04 t) | 2,360 mm (-220) | 59.8 l/min (+4.8) |
| Komatsu PC20E-6 | 2.19 t (-0.06 t) | 2,370 mm (-210) | 36 l/min (-19) |
| Yanmar ViO23-6 | 2.25 t | 2,465 mm (-115) | 43.2 l/min (-11.8) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
PC22MR-3: what the brochure names
Features Komatsu names in its own brochure for the PC22MR-3. Some of them may be optional, so check the machine's spec before you order.
- A load-sensing hydraulic system.
- Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
- An engine that meets EU Stage V.
- A short tail swing, for work next to walls and traffic.
From Komatsu's published brochure. We keep the source document on file.
Other Komatsu models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Komatsu PC22MR-3.
Other Komatsu models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Komatsu PC22MR-3.
Questions about the PC22MR-3
- What bucket width fits the PC22MR-3?
- Komatsu lists buckets from 250 to 550 mm wide for it. Pick a width in that range.
- Which quick coupler is installed on your PC22MR-3?
- Komatsu lists this coupler for it: Komatsu quick-coupler. Order attachments with the matching bracket.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/komatsu/komatsu-pc22mr-3, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Komatsu machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.