Attachments for the Komatsu PC30 MRx weight range
Weight Class: Mini Excavator (1–6 t) Operating Weight: 3,300 kg
- Bucket line
- GP - general purpose digging bucket 300–800 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the PC30 MRx
Families to look at first
- GP - general purpose digging bucket 300–800 mm
- GB - rigid grading & ditching bucket, German profile 1,000–1,400 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 1,000–1,500 mm
Quick coupler brackets at this weight
- S30
- S40
- MS01
- MS03
- CW05
- CW10
- OQ40
- HS02
- HS03
- HS06
- Klac D
- Klac E
- M02
- M03
- M10
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the PC30 MRx
Each size below has a catalogue row rated for a carrier of 3,300 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the PC30 MRx.
On a narrow screen the table scrolls sideways.
Buckets
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-4 · 2 width variants | 1,000–1,200 | 127–150 | |
| LRS - short land rakes for mini-excavators | LRS-5 | 1,560 | 130 | |
| RIP mini - ripper shank for mini-excavator | Ripper-5.5 | 51 | ||
| MR mini - multi-ripper for mini-excavator | MRF 40 · 2 width variants | 600–800 | 62–69 | |
| AC mini - asphalt cutter for mini-excavator | AC-6 | 43 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-6 | 365 | 102 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants | 1,000–1,500 | 91–261 | |
Also available | ||||
| RC - root cutter | Root cutter-2 | 170 | 13 | |
| RRB - root rake bucket profile | RRB-40 | 1,200 | 148 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S40-H, QC-S40-H/240, QC-S40-SA, QC-S40-SA/240, QC-U-S40-H, QC-U-S40-H/240 | 30–92 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-05, CW-U-05 | 25–67 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-03, QC-MS-03, QC-U-HS-03 | 30–90 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-ML-M-40 | 32 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Komatsu PC30 MRx sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Komatsu PC30 MRx at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the PC30 MRx.
Send this answer to a colleague or dealer
Komatsu PC30 MRx: GP - general purpose digging bucket (GP-40). Shortlisted by operating weight
Sizes are matched to the published operating weight of the PC30 MRx.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 3,300 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Komatsu, retrieved 2026-09-10. Source
Komatsu PC30 MRx: machine data
- Operating weight
- 3,300 kg
- Engine power
- 21 kW
- Maximum digging depth
- 2,840 mm
- Bucket breakout force
- 27.5 kN
- Arm crowd force
- 17.3 kN
- Main pump flow
- 73.1 l/min maker's document (komatsu.eu)
As published by Komatsu, retrieved 2026-09-17. Source
- Pin diameter
- 35 mm Source: Tuff Buckets and Equipment Plus. From a dealer's table. It does not say which arm or quick coupler was fitted.
A guide only. Measure the pins before you order.
What the PC30 MRx figures mean for its attachments
- The main pump delivers up to 73.1 l/min at 259.9 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 2,840 mm. That is the deepest trench it can open.
- Bucket breakout force is 27.5 kN and arm crowd force 17.3 kN. That is the force a bucket or ripper works with at the tooth.
- Engine power is 21 kW.
Figures as published by Komatsu in its own documents.
How the PC30 MRx compares with its neighbours
The nearest models by weight, with the difference to the PC30 MRx in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow |
|---|---|---|---|
| PC30 MRx | 3.3 t | 2,840 mm | 73.1 l/min |
| Komatsu PC30MR-5 | 3.29 t (-0.01 t) | 3,130 mm (+290) | not published |
| Komatsu PC33MR-5 | 3.29 t (-0.01 t) | 3,130 mm (+290) | not published |
| New Holland E35D | 3.27 t (-0.03 t) | 3,070 mm (+230) | 105 l/min (+31.9) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
Other Komatsu models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Komatsu PC30 MRx.
Other Komatsu models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Komatsu PC30 MRx.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/komatsu/komatsu-pc30-mrx, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Komatsu machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.