Attachments for the Bobcat E60 weight range
Weight Class: Midi Excavator (6–10 t) Operating Weight: 6,130 kg
- Bucket line
- GP - general purpose digging bucket 300–1,000 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the E60
Families to look at first
- GP - general purpose digging bucket 300–1,000 mm
- GB - rigid grading & ditching bucket, German profile 1,500–1,800 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 1,500–1,800 mm
Quick coupler brackets at this weight
- S40
- S45
- S50
- S60
- MS03
- MS08
- MS10
- CW10
- CW20
- OQ45
- OQ60
- OQ65
- HS06
- HS08
- Klac E
- Klac F
- M10
- M18
- SW33
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the E60
Each size below has a catalogue row rated for a carrier of 6,130 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the E60.
On a narrow screen the table scrolls sideways.
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-12 | 450 | 220 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants, GRB midi · 6 variants | 1,000–2,500 | 91–530 | |
Also available | ||||
| RC - root cutter | Root cutter-10 | 250 | 47 | |
| RRB - root rake bucket profile | RRB-90 | 1,500 | 233 | |
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-8 · 2 width variants | 1,000–1,400 | 189–259 | |
| LRS - short land rakes for mini-excavators | LRS-7 | 1,980 | 155 | |
| RIP mini - ripper shank for mini-excavator | Ripper-10 | 98 | ||
| MR mini - multi-ripper for mini-excavator | MRF 75 · 2 width variants | 800–1,000 | 117–121 | |
| AC mini - asphalt cutter for mini-excavator | AC-10 | 67 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Buckets
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S45-H, QC-S50, QC-S45-SA, QC-U-S45-H, QC-U-S50 | 70–232 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-10, CW-U-10 | 65–179 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-08, QC-MS-08, QC-U-HS-08 | 90–232 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-PG-50, QC-PG-55, QC-ML-M-45, QC-U-PG-50, QC-U-PG-55 | 45–209 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Bobcat E60 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A midi excavator is often the main machine on a site, trenching, loading and grading in the same day. Buyers usually start with a general purpose bucket, a grading bucket and a quick coupler, then add other tools when the work calls for them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Bobcat E60 at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the E60.
Send this answer to a colleague or dealer
Bobcat E60: GP - general purpose digging bucket (GP-95). Shortlisted by operating weight
Sizes are matched to the published operating weight of the E60.
- Weight Class
- Midi Excavator (6–10 t)
- Operating Weight
- 6,130 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Bobcat, retrieved 2026-09-10. Source
Bobcat E60: machine data
- Operating weight
- 6,130 kg
- Engine power
- 41 kW
- Maximum digging depth
- 3,537 mm
- Maximum dump height
- 4,126 mm
- Bucket breakout force
- 47.841 kN document from res.cloudinary.com
- Arm crowd force
- 33.472 kN document from res.cloudinary.com
- Auxiliary circuit flow
- 85.7 l/min document from res.cloudinary.com
- Main pump flow
- 138.5 l/min document from res.cloudinary.com
As published by Bobcat, retrieved 2026-09-17. Source
- Pin diameter
- 45 mm Source: Tuff Buckets and DiggerCity. From a dealer's table. It does not say which arm or quick coupler was fitted.
A guide only. Measure the pins before you order.
What the E60 figures mean for its attachments
- Its auxiliary circuit delivers 85.7 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.document from res.cloudinary.com
- The main pump delivers up to 138.5 l/min at 270 bar. That is the pump output of the whole machine, not the flow an attachment gets.document from res.cloudinary.com
- It digs down to 3,537 mm. That is the deepest trench it can open.
- It dumps at up to 4,126 mm, so a truck or skip side has to sit below that height.
- Bucket breakout force is 47.841 kN and arm crowd force 33.472 kN. That is the force a bucket or ripper works with at the tooth.document from res.cloudinary.com
- Engine power is 41 kW.
Figures without a source note are as published by Bobcat in its own documents.
How the E60 compares with its neighbours
The nearest models by weight, with the difference to the E60 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| E60 | 6.13 t | 3,537 mm | 138.5 l/min | 85.7 l/min |
| Bobcat E57W | 6.312 t (+0.182 t) | 3,495 mm (-42) | 180.3 l/min (+41.8) | 52.5 l/min (-33.2) |
| Bobcat E88 | 8.919 t (+2.789 t) | 4,519 mm (+982) | 149 l/min (+10.5) | 95 l/min (+9.3) |
| Volvo EW65 | 6.12 t (-0.01 t) | 3,603 mm (+66) | 120 l/min (-18.5) | 120 l/min (+34.3) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
E60: what the brochure names
Features Bobcat names in its own brochure for the E60. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- Automatic engine idle when the controls are left alone.
- Boom swing, for digging along walls and around obstacles.
- A zero tail swing: the rear stays inside the tracks when the upper slews.
From Bobcat's published brochure. We keep the source document on file.
Other Bobcat models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Bobcat E60.
Other Bobcat models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Bobcat E60.
Questions about the E60
- Can the E60 run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 85.7 l/min of its auxiliary circuit.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/bobcat/bobcat-e60, figures as of 2026-09-10.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Bobcat machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.