Attachments for the Wacker Neuson ET25 weight range
- Bucket line
- GP - general purpose digging bucket300–800 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Catalogue sizes for the ET25
Each size below has a catalogue row rated for a carrier of 2,355 – 2,720 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the ET25.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Standard mini-ex buckets set No. 1 | ||||
| GP - general purpose digging bucketStart herePrice & lead timeGet price & lead time | GP-30 · 4 width variants, GP-40 · 5 width variants | 36–159 | 300–800 | 33–93 |
| GB - rigid grading & ditching bucket, German profileStart herePrice & lead timeGet price & lead time | GB-30 · 2 width variants, GB-40 · 3 width variants | 93–176 | 1,000–1,400 | 70–107 |
| GBH - hydraulic tilt ditching bucket for mini-excavatorStart herePrice & lead timeGet price & lead time | GBH-30 · 2 width variants, GBH-40 · 4 width variants | 93–190 | 1,000–1,500 | 101–162 |
| RGP - skeleton rod GP bucket | RGP-30 · 2 width variants, RGP-40 · 2 width variants | 87–206 | 600–1,000 | 58–116 |
| SGP - heavy duty skeleton GP bucket | SGP-30 · 2 width variants, SGP-40 · 2 width variants | 64–128 | 600–1,000 | 64–129 |
| GPO - GP bucket with perforated bottom | GPO-30 · 2 width variants, GPO-40 · 3 width variants | 64–128 | 600–1,000 | 52–99 |
Standard mini-ex buckets set No. 2 | ||||
| GPL - general purpose digging bucket | GPL-30 · 4 width variants, GPL-40 · 5 width variants | 33–145 | 300–800 | 26–71 |
| GBP - rigid grading & ditching bucket, Italian profile | GBP-30 · 2 width variants, GBP-40 · 3 width variants | 129–187 | 1,000–1,400 | 72–98 |
| GBPH - hydraulic tilting grading & ditching bucket | GBPH-30 · 3 width variants, GBPH-40 · 3 width variants | 88–201 | 900–1,500 | 88–167 |
| RGPL - skeleton rod GPL bucket | RGPL-30 · 2 width variants, RGPL-40 · 2 width variants | 79–186 | 600–1,000 | 44–81 |
| GPLO - GPL bucket with perforated bottom | GPLO-30 · 2 width variants, GPLO-40 · 2 width variants | 79–145 | 600–800 | 43–71 |
| SGPL - heavy duty skeleton GPL bucket for mini-excavator | SGPL-30 · 2 width variants, SGPL-40 · 2 width variants | 79–186 | 600–1,000 | 48–87 |
Dutch mini-ex buckets set No. 3 | ||||
| BDP mini - clay digging bucket for mini-excavator | BDP-30, BDP-40 · 2 width variants | 16–40 | 250–400 | 30–60 |
| SB mini - Dutch profile grading & ditching bucket for mini-excavator | SB-30 · 4 width variants, SB-40 · 3 width variants | 97–184 | 900–1,200 | 65–109 |
| PDP mini - skeleton BDP stone bucket | PDP-30 · 3 width variants, PDP-40 · 4 width variants | 93–232 | 600–1,000 | 53–107 |
Nordic mini-ex buckets set No. 4 | ||||
| DS mini - Scandinavian deep digging bucket for mini-excavator | DS-30 · 3 width variants, DS-50 · 3 width variants | 66–132 | 400–600 | 44–75 |
| PS mini - Scandinavian universal grading bucket for mini-excavator | PS-25 · 3 width variants, PS-60 · 3 width variants | 112–254 | 1,000–1,400 | 64–130 |
| PSH mini - hydraulic swivelling grading bucket for mini-excavators | PS-25 · 3 width variants, PS-60 · 3 width variants | On request | 1,000–1,400 | On request |
| KS mini - cable bucket for mini-excavator | KS-20 · 3 width variants | 19–50 | 200–400 | 20–34 |
| KSV mini - Scandinavian profile cable V bucket for mini-excavator | KSV-20 · 3 width variants | 17–57 | 100–300 | 23–40 |
Special use mini-ex buckets | ||||
| CB mini - hydraulic clamp bucket for mini-excavator | CBR-30, CBR-40 | 83–113 | 600 | 80–107 |
| GKB mini - deep cable digging bucket for mini-excavator | GKB-30 | 150 | 37 | |
| RGPR - skeleton rod bucket | RGPR-30, RGPR-40 | 109–157 | 800–1,000 | 63–94 |
| RGB - skeleton rod grading & sorting bucket | RGB-30, RGB-40 | 118–200 | 1,200–1,400 | 77–108 |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-3 · 2 width variants, LR-4 · 2 width variants | 1,000–1,200 | 85–150 | |
| LRS - short land rakes for mini-excavators | LRS-3, LRS-5 | 925–1,560 | 70–130 | |
| RIP mini - ripper shank for mini-excavator | Ripper-2.5, Ripper-5.5 | 21–51 | ||
| MR mini - multi-ripper for mini-excavator | MRF 25, MRF 40 · 2 width variants | 400–800 | 36–69 | |
| AC mini - asphalt cutter for mini-excavator | AC-6 | 43 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-6 | 365 | 102 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants | 1,000–1,500 | 91–261 | |
Also available | ||||
| RC - root cutter | Root cutter-2 | 170 | 13 | |
| RRB - root rake bucket profile | RRB-40 | 1,200 | 148 | |
Quick couplers
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-couplerStart herePrice & lead timeGet price & lead timeS-System (Scandinavian) | QC-S40-H, QC-S40-H/240, QC-S40-SA, QC-S40-SA/240, QC-U-S40-H, QC-U-S40-H/240 | 30–92 | ||
| CW - CW-System compatible quick-couplerCW-System | CW-05, CW-U-05 | 25–67 | ||
| QC-HS / QC-MS - MS-System compatible quick-couplerMS system | QC-HS-03, QC-MS-03, QC-U-HS-03 | 30–90 | ||
| QC-PG - pin-grabber quick-coupler for factory bracketsPin-grabber | QC-ML-M-35 | 22 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every attachment. See the certificates.
Message us on WhatsAppPhotos and voice notes are welcome.Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Before you order: check the interface
The weight class of the Wacker Neuson ET25 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Wacker Neuson ET25 at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ET25.
Send this answer to a colleague or dealer
Wacker Neuson ET25: GP - general purpose digging bucket (GP-30, GP-40)
Sizes are matched to the published operating weight of the ET25.
- Weight Class
- Mini Excavator (1–6 t)
- Operating Weight
- 2,355 – 2,720 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Wacker Neuson, retrieved 2026-09-11. Source
Wacker Neuson ET25: machine data
- Operating weight
- 2,355 – 2,720 kg
- Engine power
- 14.6 kW
- Maximum digging depth
- 2,722 mm
- Maximum dump height
- 2,910 mm
- Bucket breakout force
- 22.6 kN
- Arm crowd force
- 15.7 kN
- Auxiliary circuit flow
- 45 l/min
- Max reach
- 4,190 mmmaker's document (cdn.mediapool.wackerneusongroup.com)
- Main pump flow
- 66 l/minmaker's document (cdn.mediapool.wackerneusongroup.com)
- Transport width
- 1,120 mmmaker's document (cdn.mediapool.wackerneusongroup.com)
As published by Wacker Neuson, retrieved 2026-09-18. Source
What the ET25 figures mean for its attachments
- Its auxiliary circuit delivers 45 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 66 l/min at 240 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 2,722 mm. That is the deepest trench it can open.
- Its maximum reach is 4,190 mm.
- It dumps at up to 2,910 mm, so a truck or skip side has to sit below that height.
- Bucket breakout force is 22.6 kN and arm crowd force 15.7 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 4,120 x 1,120 x 2,398 mm (length, width, height).
- Engine power is 14.6 kW.
Figures as published by Wacker Neuson in its own documents.
How the ET25 compares with its neighbours
The nearest models by weight, with the difference to the ET25 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| ET25 | 2.355 t | 2,722 mm | 66 l/min | 45 l/min |
| Wacker Neuson EZ26e | 2.44 t (+0.085 t) | 2,803 mm (+81) | 68.6 l/min (+2.6) | 45 l/min |
| Wacker Neuson EZ26 | 2.455 t (+0.1 t) | 2,803 mm (+81) | 65.8 l/min (-0.2) | 44.9 l/min (-0.1) |
| CASE CX25EV | 2.34 t (-0.015 t) | 2,560 mm (-162) | 46 l/min (-20) | 40 l/min (-5) |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ET25: what the brochure names
Features Wacker Neuson names in its own brochure for the ET25. Some of them may be optional, so check the machine's spec before you order.
- Automatic engine idle when the controls are left alone.
- A dozer blade.
- Boom swing, for digging along walls and around obstacles.
From Wacker Neuson's published brochure. We keep the source document on file.
Other Wacker Neuson models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Wacker Neuson ET25.
Other Wacker Neuson models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Wacker Neuson ET25.
Questions about the ET25
- Can the ET25 run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 45 l/min of its auxiliary circuit.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/wacker-neuson/wacker-neuson-et25, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Wacker Neuson machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.