Skip to content
info@sieruta.com+48 503 808 636
Price & dispatch week
Operating-weight guide

Attachments for the Wacker Neuson EZ26 weight range

Bucket line
GP - general purpose digging bucket300–800 mm wide
Price & dispatch week
  • We usually reply within 1 working day
  • We check the fit before we send the quote
  • Every offer names the dispatch week
  • If a bracket we made is wrong and does not fit your machine, we replace it.

Catalogue sizes for the EZ26

Each size below has a catalogue row rated for a carrier of 2,455 – 3,358 kg operating weight. Tell us which sizes you want and we reply with an offer.

On a narrow screen the table scrolls sideways.

AttachmentSizesCapacity [dm³]Width [mm]Weight [kg]
GP - general purpose digging bucketGP-30 · 4 width variants, GP-40 · 5 width variants36–159 SAE300–80033–93
GB - rigid grading & ditching bucket, German profileGB-30 · 2 width variants, GB-40 · 3 width variants93–176 SAE1,000–1,40070–107
GBH - hydraulic tilt ditching bucket for mini-excavatorGBH-30 · 2 width variants, GBH-40 · 4 width variants93–190 SAE1,000–1,500101–162
RGP - skeleton rod GP bucketRGP-30 · 2 width variants, RGP-40 · 2 width variants87–206 SAE600–1,00058–116
SGP - heavy duty skeleton GP bucketSGP-30 · 2 width variants, SGP-40 · 2 width variants64–128 SAE600–1,00064–129
GPO - GP bucket with perforated bottomGPO-30 · 2 width variants, GPO-40 · 3 width variants64–128 SAE600–1,00052–99
GPL - general purpose digging bucketGPL-30 · 4 width variants, GPL-40 · 5 width variants33–145 SAE300–80026–71
GBP - rigid grading & ditching bucket, Italian profileGBP-30 · 2 width variants, GBP-40 · 3 width variants129–187 SAE1,000–1,40072–98
GBPH - hydraulic tilting grading & ditching bucketGBPH-30 · 3 width variants, GBPH-40 · 3 width variants88–201 SAE900–1,50088–167
RGPL - skeleton rod GPL bucketRGPL-30 · 2 width variants, RGPL-40 · 2 width variants79–186 SAE600–1,00044–81
GPLO - GPL bucket with perforated bottomGPLO-30 · 2 width variants, GPLO-40 · 2 width variants79–145 SAE600–80043–71
SGPL - heavy duty skeleton GPL bucket for mini-excavatorSGPL-30 · 2 width variants, SGPL-40 · 2 width variants79–186 SAE600–1,00048–87
BDP mini - clay digging bucket for mini-excavatorBDP-30, BDP-40 · 2 width variants16–40 SAE250–40030–60
SB mini - Dutch profile grading & ditching bucket for mini-excavatorSB-30 · 4 width variants, SB-40 · 3 width variants97–184 SAE900–1,20065–109
PDP mini - skeleton BDP stone bucketPDP-30 · 3 width variants, PDP-40 · 4 width variants93–232 SAE600–1,00053–107
DS mini - Scandinavian deep digging bucket for mini-excavatorDS-30 · 3 width variants, DS-50 · 3 width variants66–132 SAE400–60044–75
PS mini - Scandinavian universal grading bucket for mini-excavatorPS-25 · 3 width variants, PS-60 · 3 width variants112–254 SAE1,000–1,40064–130
PSH mini - hydraulic swivelling grading bucket for mini-excavatorsPS-25 · 3 width variants, PS-60 · 3 width variants1,000–1,400
KS mini - cable bucket for mini-excavatorKS-20 · 3 width variants, KS-50 · 3 width variants19–107 SAE200–50020–65
KSV mini - Scandinavian profile cable V bucket for mini-excavatorKSV-20 · 3 width variants, KSV-50 · 3 width variants17–71 SAE100–30023–40
CB mini - hydraulic clamp bucket for mini-excavatorCBR-30, CBR-4083–113 SAE60080–107
GKB mini - deep cable digging bucket for mini-excavatorGKB-30, GKB-6015037–47
RGPR - skeleton rod bucketRGPR-30, RGPR-40109–157 SAE800–1,00063–94
RGB - skeleton rod grading & sorting bucketRGB-30, RGB-40118–200 SAE1,200–1,40077–108
LR mini - straight land rakes for mini-excavatorLR-3 · 2 width variants, LR-4 · 2 width variants1,000–1,20085–150
LRS - short land rakes for mini-excavatorsLRS-3, LRS-5925–1,56070–130
RIP mini - ripper shank for mini-excavatorRipper-2.5, Ripper-5.521–51
MR mini - multi-ripper for mini-excavatorMRF 25, MRF 40 · 2 width variants400–80036–69
AC mini - asphalt cutter for mini-excavatorAC-643
GRB light - mini-excavator grading beam with lowered massGRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants1,500–2,00086–141
DuoRIP - double ripper for root extractionDuo-Ripper-6365102
GRB - excavator grading beamGRB-MINI · 4 variants, GRBH-MINI · 2 width variants1,000–1,50091–261
RC - root cutterRoot cutter-217013
RRB - root rake bucket profileRRB-401,200148
QC-S - S-System Scandinavian quick-couplerQC-S40-H, QC-S40-H/240, QC-S40-SA, QC-S40-SA/240, QC-U-S40-H, QC-U-S40-H/24030–92
CW - CW-System compatible quick-couplerCW-05, CW-U-0525–67
QC-HS / QC-MS - MS-System compatible quick-couplerQC-HS-03, QC-MS-03, QC-U-HS-0330–90
QC-PG - pin-grabber quick-coupler for factory bracketsQC-ML-M-35, QC-ML-M-4022–32
Get a price

Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.

Message us on WhatsAppPhotos and voice notes are welcome.
For publishers: cite or embed this table

Cite this table as https://sieruta.com/en/fit/wacker-neuson/wacker-neuson-ez26, figures as of 2026-09-11.

Embed this table on your site

Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.

Wacker Neuson EZ26
Wacker Neuson EZ26Photo: Bene Riobó, CC BY-SA 4.0, via Wikimedia Commons

Sizes are matched to the published operating weight of the EZ26.

Weight Class
Mini Excavator (1–6 t)
Operating Weight
2,455 – 3,358 kg
  • Family-owned group, founded in 1996
  • More than 50,000 attachments delivered
  • Built in our own factory in Poland

Operating weight as published by Wacker Neuson, retrieved 2026-09-11. Source

Start here

The attachments buyers in your market ask for first, sized for the EZ26.

  1. GP - general purpose digging bucketGet a price
  2. GB - rigid grading & ditching bucket, German profileGet a price
  3. GBH - hydraulic tilt ditching bucket for mini-excavatorGet a price
  4. QC-S - S-System Scandinavian quick-couplerGet a price

Which coupler is on your machine?

Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.

How to measure your coupler
213

Not sure which system it is? Three measurements tell us which bracket you need.

  1. Measure the diameter of both pins.
  2. Measure the distance between the pin centres.
  3. Measure the width between the inside faces of the ears.

If the coupler has a make or type printed on it, send that too.

Send me the spec sheet for my machine

Pick a bucket line and we email you its spec sheet, with the sizes we build for the EZ26.

Machine

Wacker Neuson EZ26

We usually reply within 1 working day.

We use your details only to answer this request. Privacy policy

Send this answer to a colleague or dealer

Machine, line and sizes

Wacker Neuson EZ26: GP - general purpose digging bucket (GP-30, GP-40)

EZ26 at a glance

FigureValueSource
Max dig depth2,803 mmmaker's website (wackerneuson.de)
Max reach4,706 mmmaker's document (cdn.mediapool.wackerneusongroup.com)
Max dump height2,893 mmmaker's document (cdn.mediapool.wackerneusongroup.com)
Auxiliary flow44.9 l/minmaker's document (cdn.mediapool.wackerneusongroup.com)
Transport width1,550 mmmaker's document (cdn.mediapool.wackerneusongroup.com)

Only figures the maker publishes for this model. Where a figure is missing, no value is shown.

What the EZ26 figures mean for its attachments

  • Its auxiliary circuit delivers 44.9 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
  • It digs down to 2,803 mm. That is the deepest trench it can open.
  • Its maximum reach is 4,706 mm.
  • It dumps at up to 2,893 mm, so a truck or skip side has to sit below that height.
  • Bucket breakout force is 22.6 kN and arm crowd force 15.7 kN. That is the force a bucket or ripper works with at the tooth.
  • For transport it measures 4,199 x 1,550 x 2,412 mm (length, width, height).
  • Engine power is 14.6 kW.

Figures as published by Wacker Neuson in its own documents.

How the EZ26 compares with its neighbours

The nearest models by weight, with the difference to the EZ26 in parentheses where both makers publish the figure.

ModelOperating weightMax dig depthAuxiliary flow
EZ262.455 t2,803 mm44.9 l/min
Wacker Neuson EZ26e2.44 t (-0.015 t)2,803 mm45 l/min (+0.1)
Wacker Neuson ET252.355 t (-0.1 t)2,722 mm (-81)45 l/min (+0.1)
CASE CX24D 2-Piece Boom2.435 t (-0.02 t)not published50 l/min (+5.1)

Figures as each maker publishes them. A difference is shown only where both machines have a published value.

EZ26: what the brochure names

Features Wacker Neuson names in its own brochure for the EZ26. Some of them may be optional, so check the machine's spec before you order.

  • A zero tail swing: the rear stays inside the tracks when the upper slews.
  • A dozer blade.
  • Boom swing, for digging along walls and around obstacles.
  • Operator protection certified to ROPS and FOPS.

From Wacker Neuson's published brochure. We keep the source document on file.

Questions about the EZ26

Can the EZ26 run a hydraulic attachment?
Yes, if the tool's rated oil flow range includes the 44.9 l/min of its auxiliary circuit.
BucketsToolsQuick couplers

Each family shows its candidate models by operating-weight range.

Buckets

Standard mini-ex buckets set No. 1

Standard mini-ex buckets set No. 2

Dutch mini-ex buckets set No. 3

Nordic mini-ex buckets set No. 4

Tools

Non-bucket attachments

Also available

Quick couplers

Bucket sets for this machine

Sets of one bucket profile that include buckets listed for the Wacker Neuson EZ26. Each set lists the buckets that match the machine's operating weight.

Wacker Neuson EZ26: machine data

Operating weight
2,455 – 3,358 kg
Engine power
14.6 kW
Maximum digging depth
2,803 mm
Maximum dump height
2,893 mm
Bucket breakout force
22.6 kN
Arm crowd force
15.7 kN
Auxiliary circuit flow
44.9 l/min

As published by Wacker Neuson, retrieved 2026-09-18. Source

Before you order: check the interface

The weight class of the Wacker Neuson EZ26 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.

On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.

Quick coupler brackets at this weight

In our model tables, the attachments listed for the Wacker Neuson EZ26 at its weight are built with these brackets. Each code opens the models that list it.

  1. Measure the diameter of both bucket pins.
  2. Measure the distance between the pin centres.
  3. Measure the inside width between the stick ears.
  4. If the machine runs a quick coupler, note its make and type.

What these terms mean:

How to choose an attachment for the job:

Other Wacker Neuson models of a similar weight

Other makes of a similar weight

Operating weight within 2 t of the Wacker Neuson EZ26.

Other Wacker Neuson models with the same coupler brackets

Our model tables give these machines the same quick coupler brackets.

Why buy from the factory

  • Cutting, machining, welding and painting on one site, our own factory in Poland, EU
  • More than 50,000 attachments delivered since 2008
  • A record for every serial number, so the spare parts match your attachment

Need Custom Specifications?

We can manufacture attachments to your exact pin spacing and requirements for Wacker Neuson EZ26.

Get a price Custom Engineering

Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.

Do you sell Wacker Neuson machines? Machine dealer supply

Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.

Ask a question

We use your details only to answer this request. Privacy notice

Tell us your machine and what you need. We will help confirm the fit.

info@sieruta.com+48 503 808 636WhatsApp

Mon–Fri, 08:00–16:00 (Poland time)

What happens next: our sales team reads your request and answers by email or phone. We usually reply within 1 working day.