Attachments for the Wacker Neuson ET58 weight range
Weight Class: Mini Excavator (1–6 t) · Midi Excavator (6–10 t) Operating Weight: 5,052 – 6,386 kg
- Bucket line
- GP - general purpose digging bucket 300–1,000 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
How is the attachment mounted on this machine?
Tell us what is on the machine now. It narrows the sizes we show and goes with your enquiry. It does not confirm fit: we check the bracket before we send the quote.
Ask for a price with this answer
The short version for the ET58
Families to look at first
- GP - general purpose digging bucket 300–1,000 mm
- GB - rigid grading & ditching bucket, German profile 1,200–1,800 mm
- GBH - hydraulic tilt ditching bucket for mini-excavator 1,200–1,800 mm
Quick coupler brackets at this weight
- S40
- S45
- S50
- S60
- MS03
- MS08
- MS10
- CW05
- CW10
- CW20
- OQ40
- OQ45
- OQ60
- OQ65
- HS03
- HS06
- HS08
- Klac D
- Klac E
- Klac F
- M03
- M10
- M18
- SW33
Brackets we build attachments with in this weight range. Not a confirmed fit.
Still to check
Pin diameter, pin spacing, inside width between the stick ears, and any quick coupler on the machine.
Catalogue sizes for the ET58
Each size below has a catalogue row rated for a carrier of 5,052 – 6,386 kg operating weight. Tell us which sizes you want and we reply with an offer.
Each family shows its candidate models by operating-weight range.
The attachments buyers in your market ask for first, sized for the ET58.
On a narrow screen the table scrolls sideways.
Buckets
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Standard mini-ex buckets set No. 1 | ||||
| GP - general purpose digging bucket Start here Price & lead time Get price & lead time | GP-60 · 6 width variants, GP-95 · 6 width variants | 60–377 | 300–1,000 | 58–160 |
| GB - rigid grading & ditching bucket, German profile Start here Price & lead time Get price & lead time | GB-60 · 4 width variants, GB-90 · 3 width variants | 187–334 | 1,200–1,800 | 111–200 |
| GBH - hydraulic tilt ditching bucket for mini-excavator Start here Price & lead time Get price & lead time | GBH-60 · 4 width variants, GBH-90 · 3 width variants | 187–334 | 1,200–1,800 | 182–297 |
| RGP - skeleton rod GP bucket | RGP-60, RGP-95 | 272–355 | 1,000 | 138–176 |
| SGP - heavy duty skeleton GP bucket | SGP-60, SGP-95 | 144–183 | 1,000 | 147–185 |
| GPO - GP bucket with perforated bottom | GPO-60 · 3 width variants, GPO-95 · 2 width variants | 98–183 | 600–1,000 | 88–148 |
Standard mini-ex buckets set No. 2 | ||||
| GPL - general purpose digging bucket | GPL-60 · 6 width variants, GPL-75 · 6 width variants | 62–321 | 300–1,000 | 51–152 |
| GBP - rigid grading & ditching bucket, Italian profile | GBP-60 · 4 width variants, GBP-75 · 4 width variants | 214–392 | 1,200–1,800 | 116–200 |
| GBPH - hydraulic tilting grading & ditching bucket | GBPH-60 · 3 width variants, GBPH-75 · 4 width variants | 214–345 | 1,200–1,600 | 197–264 |
| RGPL - skeleton rod GPL bucket | RGPL-60 · 2 width variants, RGPL-75 | 211–321 | 800–1,000 | 103–168 |
| GPLO - GPL bucket with perforated bottom | GPLO-60 · 3 width variants, GPLO-75 · 3 width variants | 150–321 | 600–1,000 | 81–152 |
| SGPL - heavy duty skeleton GPL bucket for mini-excavator | SGPL-60 · 2 width variants, SGPL-75 | 211–321 | 800–1,000 | 91–139 |
Dutch mini-ex buckets set No. 3 | ||||
| BDP mini - clay digging bucket for mini-excavator | BDP-60 · 2 width variants, BDP-90 · 2 width variants | 42–120 | 300–500 | 75–141 |
| SB mini - Dutch profile grading & ditching bucket for mini-excavator | SB-60 · 5 width variants, SB-75 · 5 width variants | 192–396 | 1,000–1,600 | 105–214 |
| PDP mini - skeleton BDP stone bucket | PDP-60 · 3 width variants, PDP-75 · 3 width variants | 187–350 | 700–1,000 | 101–166 |
Nordic mini-ex buckets set No. 4 | ||||
| DS mini - Scandinavian deep digging bucket for mini-excavator | DS-60 · 3 width variants, DS-70 · 3 width variants | 125–244 | 500–800 | 77–131 |
| PS mini - Scandinavian universal grading bucket for mini-excavator | PS-60 · 3 width variants, PS-80 · 5 width variants | 209–444 | 1,200–1,800 | 107–224 |
| PSH mini - hydraulic swivelling grading bucket for mini-excavators | PS-60 · 3 width variants, PS-80 · 5 width variants | On request | 1,200–1,800 | On request |
| KS mini - cable bucket for mini-excavator | KS-100 · 3 width variants | 101–196 | 300–500 | 90–120 |
| KSV mini - Scandinavian profile cable V bucket for mini-excavator | KSV-100 · 3 width variants | 101–201 | 200–400 | 91–122 |
Special use mini-ex buckets | ||||
| CB mini - hydraulic clamp bucket for mini-excavator | CBR-60, CBR-90 | 156–245 | 600–800 | 154–202 |
| GKB mini - deep cable digging bucket for mini-excavator | GKB-60, GKB-120 | 150–200 | 47–79 | |
| RGPR - skeleton rod bucket | RGPR-60, RGPR-75 | 203–263 | 1,000 | 156–192 |
| RGB - skeleton rod grading & sorting bucket | RGB-60, RGB-90 | 220–340 | 1,400–1,800 | 120–183 |
Tools
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
Other mini-ex attachments | ||||
| LR mini - straight land rakes for mini-excavator | LR-6 · 2 width variants, LR-8 · 2 width variants | 1,000–1,400 | 158–259 | |
| LRS - short land rakes for mini-excavators | LRS-7 | 1,980 | 155 | |
| RIP mini - ripper shank for mini-excavator | Ripper-5.5, Ripper-10 | 51–98 | ||
| MR mini - multi-ripper for mini-excavator | MRF 75 · 2 width variants | 800–1,000 | 117–121 | |
| AC mini - asphalt cutter for mini-excavator | AC-6, AC-10 | 43–67 | ||
| GRB light - mini-excavator grading beam with lowered mass | GRB-MIKRO · 3 width variants, GRBH-MIKRO · 3 width variants | 1,500–2,000 | 86–141 | |
Non-bucket attachments | ||||
| DuoRIP - double ripper for root extraction | Duo-Ripper-6, Duo-Ripper-12 | 365–450 | 102–220 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants, GRB midi · 6 variants | 1,000–2,500 | 91–530 | |
Also available | ||||
| RC - root cutter | Root cutter-6, Root cutter-10 | 200–250 | 20–47 | |
| RRB - root rake bucket profile | RRB-60, RRB-90 | 1,500 | 222–233 | |
Quick couplers
Coupler sizes within this machine's published weight range. Not a confirmed fit.
| Attachment | Sizes | Heaped capacity ISO 7451 [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| QC-S - S-System Scandinavian quick-coupler Start here Price & lead time Get price & lead time S-System (Scandinavian) | QC-S40-H, QC-S40-H/240, QC-S45-H, QC-S50, QC-S40-SA, QC-S40-SA/240, QC-S45-SA, QC-U-S40-H, QC-U-S40-H/240, QC-U-S45-H, QC-U-S50 | 30–232 | ||
| CW - CW-System compatible quick-coupler CW-System | CW-10, CW-U-10 | 65–179 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler MS system | QC-HS-03, QC-HS-08, QC-MS-03, QC-MS-08, QC-U-HS-03, QC-U-HS-08 | 30–232 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets Pin-grabber | QC-PG-50, QC-PG-55, QC-ML-M-45, QC-U-PG-50, QC-U-PG-55 | 45–209 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every quick coupler and hydraulic attachment. See the certificates.
Message us on WhatsApp Photos and voice notes are welcome.Before you order: check the interface
The weight class of the Wacker Neuson ET58 sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
On a mini excavator the weight of the attachment counts for more than on a larger machine, because every kilogram of bucket is taken from lift capacity and stability. A narrow trenching bucket and a wide grading bucket are the usual pair, and many machines run a small quick coupler to change between them.
A midi excavator is often the main machine on a site, trenching, loading and grading in the same day. Buyers usually start with a general purpose bucket, a grading bucket and a quick coupler, then add other tools when the work calls for them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Wacker Neuson ET58 at its weight are built with these brackets. Each code opens the models that list it.
Brackets we build attachments with in this weight range. Not a confirmed fit.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the ET58.
Send this answer to a colleague or dealer
Wacker Neuson ET58: GP - general purpose digging bucket (GP-60, GP-95). Shortlisted by operating weight
Sizes are matched to the published operating weight of the ET58.
- Weight Class
- Mini Excavator (1–6 t) · Midi Excavator (6–10 t)
- Operating Weight
- 5,052 – 6,386 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Wacker Neuson, retrieved 2026-09-11. Source
Wacker Neuson ET58: machine data
- Operating weight
- 5,052 – 6,386 kg
- Engine power
- 33.5 kW
- Maximum digging depth
- 4,017 mm
- Maximum dump height
- 3,995 mm
- Bucket breakout force
- 46 kN
- Arm crowd force
- 28 kN
- Auxiliary circuit flow
- 75 l/min
- Max reach
- 6,164 mm maker's document (cdn.mediapool.wackerneusongroup.com)
- Main pump flow
- 132 l/min maker's document (cdn.mediapool.wackerneusongroup.com)
- Transport width
- 1,960 mm maker's document (cdn.mediapool.wackerneusongroup.com)
As published by Wacker Neuson, retrieved 2026-09-18. Source
What the ET58 figures mean for its attachments
- Its auxiliary circuit delivers 75 l/min. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 132 l/min at 245 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- It digs down to 4,017 mm. That is the deepest trench it can open.
- Its maximum reach is 6,164 mm.
- It dumps at up to 3,995 mm, so a truck or skip side has to sit below that height.
- Bucket breakout force is 46 kN and arm crowd force 28 kN. That is the force a bucket or ripper works with at the tooth.
- For transport it measures 5,455 x 1,960 x 2,550 mm (length, width, height).
- Engine power is 33.5 kW.
Figures as published by Wacker Neuson in its own documents.
How the ET58 compares with its neighbours
The nearest models by weight, with the difference to the ET58 in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| ET58 | 5.052 t | 4,017 mm | 132 l/min | 75 l/min |
| Wacker Neuson EZ50 | 4.847 t (-0.205 t) | 3,667 mm (-350) | 126 l/min (-6) | 73 l/min (-2) |
| Wacker Neuson ET42 | 4.032 t (-1.02 t) | 3,544 mm (-473) | 90 l/min (-42) | 74 l/min (-1) |
| Volvo ECR50 | 5.05 t (-0.002 t) | 4,144 mm (+127) | 120 l/min (-12) | 75 l/min |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
ET58: build years and variants
Build years: 2021–2026
Variants
- ET58 (2021–2026)
- ET58 (2021–2026)
Years and variants as listed in the LECTURA Specs database.
ET58: what the brochure names
Features Wacker Neuson names in its own brochure for the ET58. Some of them may be optional, so check the machine's spec before you order.
- An engine that meets EU Stage V.
- A load-sensing hydraulic system.
- A dozer blade.
- Boom swing, for digging along walls and around obstacles.
From Wacker Neuson's published brochure. We keep the source document on file.
Other Wacker Neuson models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Wacker Neuson ET58.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Wacker Neuson ET58.
Questions about the ET58
- Can the ET58 run a hydraulic attachment?
- Yes, if the tool's rated oil flow range includes the 75 l/min of its auxiliary circuit.
For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/wacker-neuson/wacker-neuson-et58, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Do you sell Wacker Neuson machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.