Attachments for the Mecalac 8MCR weight range
- Bucket line
- GP - general purpose digging bucket300–1000 mm wide
- We usually reply within 1 working day
- We check the fit before we send the quote
- Every offer names the dispatch week
- If a bracket we made is wrong and does not fit your machine, we replace it.
Catalogue sizes for the 8MCR
Each size below has a catalogue row rated for a carrier of 7,200 – 7,600 kg operating weight. Tell us which sizes you want and we reply with an offer.
On a narrow screen the table scrolls sideways.
| Attachment | Sizes | Capacity [dm³] | Width [mm] | Weight [kg] |
|---|---|---|---|---|
| DuoRIP - double ripper for root extraction | Duo-Ripper-12 | 450 | 220 | |
| GRB - excavator grading beam | GRB-MINI · 4 variants, GRBH-MINI · 2 width variants, GRB midi · 6 variants | 1,000–2,500 | 91–530 | |
| RC - root cutter | Root cutter-10 | 250 | 47 | |
| RRB - root rake bucket profile | RRB-90 | 1,500 | 233 | |
| GP - general purpose digging bucket | GP-95 · 6 width variants | 100–377 SAE | 300–1,000 | 86–160 |
| GB - rigid grading & ditching bucket, German profile | GB-90 · 3 width variants | 275–334 SAE | 1,500–1,800 | 170–200 |
| GBH - hydraulic tilt ditching bucket for mini-excavator | GBH-90 · 3 width variants | 275–334 SAE | 1,500–1,800 | 267–297 |
| RGP - skeleton rod GP bucket | RGP-95 | 355 SAE | 1,000 | 176 |
| SGP - heavy duty skeleton GP bucket | SGP-95 | 183 SAE | 1,000 | 185 |
| GPO - GP bucket with perforated bottom | GPO-95 · 2 width variants | 154–183 SAE | 800–1,000 | 130–148 |
| GPL - general purpose digging bucket | GPL-75 · 6 width variants, GPL-95 · 6 width variants | 71–367 SAE | 300–1,000 | 67–172 |
| GBP - rigid grading & ditching bucket, Italian profile | GBP-75 · 4 width variants, GBP-95 · 3 width variants | 297–511 SAE | 1,400–1,800 | 160–260 |
| GBPH - hydraulic tilting grading & ditching bucket | GBPH-75 · 4 width variants, GBPH-95 · 3 width variants | 249–511 SAE | 1,200–1,800 | 223–370 |
| RGPL - skeleton rod GPL bucket | RGPL-75, RGPL-95 | 321–367 SAE | 1,000 | 168–178 |
| GPLO - GPL bucket with perforated bottom | GPLO-75 · 3 width variants, GPLO-95 · 2 width variants | 175–367 SAE | 600–1,000 | 103–172 |
| SGPL - heavy duty skeleton GPL bucket for mini-excavator | SGPL-75, SGPL-95 | 321–367 SAE | 1,000 | 139–150 |
| BDP mini - clay digging bucket for mini-excavator | BDP-90 · 2 width variants | 88–120 SAE | 400–500 | 126–141 |
| SB mini - Dutch profile grading & ditching bucket for mini-excavator | SB-75 · 5 width variants, SB-90 · 5 width variants | 283–614 SAE | 1,200–1,800 | 164–291 |
| PDP mini - skeleton BDP stone bucket | PDP-75 · 3 width variants, PDP-90 · 3 width variants | 229–546 SAE | 700–1,200 | 128–209 |
| DS mini - Scandinavian deep digging bucket for mini-excavator | DS-90 · 4 width variants | 170–452 SAE | 500–1,000 | 125–209 |
| PS mini - Scandinavian universal grading bucket for mini-excavator | PS-80 · 5 width variants | 295–444 SAE | 1,300–1,800 | 152–224 |
| PSH mini - hydraulic swivelling grading bucket for mini-excavators | PS-80 · 5 width variants | 1,300–1,800 | ||
| KS mini - cable bucket for mini-excavator | KS-100 · 3 width variants | 101–196 SAE | 300–500 | 90–120 |
| KSV mini - Scandinavian profile cable V bucket for mini-excavator | KSV-100 · 3 width variants | 101–201 SAE | 200–400 | 91–122 |
| CB mini - hydraulic clamp bucket for mini-excavator | CBR-90 | 245 SAE | 800 | 202 |
| GKB mini - deep cable digging bucket for mini-excavator | GKB-120 | 200 | 79 | |
| RGPR - skeleton rod bucket | RGPR-75, RGPR-95 | 263–295 SAE | 1,000–1,200 | 192–220 |
| RGB - skeleton rod grading & sorting bucket | RGB-90 | 340 SAE | 1,800 | 183 |
| LR mini - straight land rakes for mini-excavator | LR-8 · 2 width variants | 1,000–1,400 | 189–259 | |
| LRS - short land rakes for mini-excavators | LRS-15 | 1,980 | 380 | |
| RIP mini - ripper shank for mini-excavator | Ripper-10 | 98 | ||
| MR mini - multi-ripper for mini-excavator | MRF 75 · 2 width variants, MRF 140 · 2 width variants | 800–1,200 | 117–228 | |
| AC mini - asphalt cutter for mini-excavator | AC-10 | 67 | ||
| QC-S - S-System Scandinavian quick-coupler | QC-S45-H, QC-S50, QC-S45-SA, QC-U-S45-H, QC-U-S50 | 70–232 | ||
| CW - CW-System compatible quick-coupler | CW-10, CW-20, CW-20 S, CW-U-10, CW-U-20, CW-U-20 S | 65–190 | ||
| QC-HS / QC-MS - MS-System compatible quick-coupler | QC-HS-08, QC-MS-08, QC-U-HS-08 | 90–232 | ||
| QC-PG - pin-grabber quick-coupler for factory brackets | QC-PG-50, QC-PG-55, QC-PG-60, QC-ML-M-45, QC-U-PG-50, QC-U-PG-55, QC-U-PG-60 | 45–352 |
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Message us on WhatsAppPhotos and voice notes are welcome.For publishers: cite or embed this table
Cite this table as https://sieruta.com/en/fit/mecalac/mecalac-8mcr-2, figures as of 2026-09-11.
Embed this table on your site
Copy the HTML below into your page. It keeps the link back to this page and the date of the figures.
Sizes are matched to the published operating weight of the 8MCR.
- Weight Class
- Midi Excavator (6–12 t)
- Operating Weight
- 7,200 – 7,600 kg
- Family-owned group, founded in 1996
- More than 50,000 attachments delivered
- Built in our own factory in Poland
Operating weight as published by Mecalac, retrieved 2026-09-11. Source
Start here
The attachments buyers in your market ask for first, sized for the 8MCR.
Which coupler is on your machine?
Pick the system on your machine and we put it in your enquiry. We check the bracket before we send the quote.
How to measure your coupler
Not sure which system it is? Three measurements tell us which bracket you need.
- Measure the diameter of both pins.
- Measure the distance between the pin centres.
- Measure the width between the inside faces of the ears.
If the coupler has a make or type printed on it, send that too.
Send me the spec sheet for my machine
Pick a bucket line and we email you its spec sheet, with the sizes we build for the 8MCR.
Send this answer to a colleague or dealer
Mecalac 8MCR: GP - general purpose digging bucket (GP-95)
8MCR at a glance
| Figure | Value | Source |
|---|---|---|
| Max dig depth | 3,700 mm | maker's document (mecalac.com) |
| Max reach | 6,750 mm | maker's document (mecalac.com) |
| Max dump height | 3,571 mm | maker's document (mecalac.com) |
| Arm length | 1,800 mm | maker's document (mecalac.com) |
| Main pump flow | 120 l/min | maker's document (mecalac.com) |
| Auxiliary flow | 90 l/min | maker's document (mecalac.com) |
| Auxiliary pressure | 280 bar | maker's document (mecalac.com) |
| Bucket capacity | 0.115–0.355 m³ | maker's document (mecalac.com) |
| Bucket width | 350–900 mm | maker's document (mecalac.com) |
| Quick coupler | CONNECT coupling system | maker's document (mecalac.com) |
| Transport width | 2,100 mm | maker's document (mecalac.com) |
Only figures the maker publishes for this model. Where a figure is missing, no value is shown.
What the 8MCR figures mean for its attachments
- Its auxiliary circuit is rated at 90 l/min and 280 bar. A breaker, auger, tilt rotator or other hydraulic tool states the oil flow it needs, so choose one whose range includes this figure.
- The main pump delivers up to 120 l/min at 280 bar. That is the pump output of the whole machine, not the flow an attachment gets.
- Mecalac lists this quick coupler for it: CONNECT coupling system. The bracket on every attachment has to match the coupler.
- It digs down to 3,700 mm. That is the deepest trench it can open.
- Its maximum reach is 6,750 mm.
- It dumps at up to 3,571 mm, so a truck or skip side has to sit below that height.
- Its arm is 1,800 mm long.
- Mecalac lists buckets from 350 to 900 mm wide for this machine. Compare that with the bucket widths in the table above.Our sizes in that range: GP - general purpose digging bucket (GP-95); GPO - GP bucket with perforated bottom (GPO-95); GPL - general purpose digging bucket (GPL-75, GPL-95); GPLO - GPL bucket with perforated bottom (GPLO-75, GPLO-95); BDP mini - clay digging bucket for mini-excavator (BDP-90); PDP mini - skeleton BDP stone bucket (PDP-75, PDP-90); DS mini - Scandinavian deep digging bucket for mini-excavator (DS-90); KS mini - cable bucket for mini-excavator (KS-100); KSV mini - Scandinavian profile cable V bucket for mini-excavator (KSV-100); CB mini - hydraulic clamp bucket for mini-excavator (CBR-90)
- Mecalac lists bucket capacities from 0.115 to 0.355 m³.
- Its tail swing radius is 1,254 mm, which matters beside a wall or in a live traffic lane.
- For transport it measures 3,129 x 2,100 x 2,900 mm (length, width, height).
- Engine power is 55.4 kW.
Figures as published by Mecalac in its own documents.
How the 8MCR compares with its neighbours
The nearest models by weight, with the difference to the 8MCR in parentheses where both makers publish the figure.
| Model | Operating weight | Max dig depth | Main pump flow | Auxiliary flow |
|---|---|---|---|---|
| 8MCR | 7.2 t | 3,700 mm | 120 l/min | 90 l/min |
| Mecalac TLB830 | 7.215 t (+0.015 t) | 5,438 mm (+1,738) | 128 l/min (+8) | not published |
| Mecalac 7MWR | 6.925 t (-0.275 t) | 3,318 mm (-382) | 100 l/min (-20) | 80 l/min (-10) |
| Komatsu PW75R-2 | 7.2 t | 3,900 mm (+200) | 167 l/min (+47) | not published |
Figures as each maker publishes them. A difference is shown only where both machines have a published value.
8MCR: what the brochure names
Features Mecalac names in its own brochure for the 8MCR. Some of them may be optional, so check the machine's spec before you order.
- An offset boom.
- Telematics for tracking the machine remotely.
- Proportional control of the auxiliary hydraulics, for tilt buckets, augers and breakers.
- Use with a tiltrotator.
From Mecalac's published brochure. We keep the source document on file.
Questions about the 8MCR
- What bucket width fits the 8MCR?
- Mecalac lists buckets from 350 to 900 mm wide for it. Pick a width in that range from the sizes above.
- Which quick coupler is installed on your 8MCR?
- Mecalac lists this coupler for it: CONNECT coupling system. Order attachments with the matching bracket.
- Can the 8MCR run a hydraulic attachment?
- Yes, if the tool's rated range covers the auxiliary circuit: 90 l/min at 280 bar.
Each family shows its candidate models by operating-weight range.
Non-bucket attachments
- DuoRIP - double ripper for root extraction
Duo-Ripper-12
- GRB - excavator grading beam
GRB-MINI · 4 variants, GRBH-MINI · 2 width variants, GRB midi · 6 variants
Also available
- RC - root cutter
Root cutter-10
- RRB - root rake bucket profile
RRB-90
Other mini-ex attachments
- LR mini - straight land rakes for mini-excavator
LR-8 · 2 width variants
- LRS - short land rakes for mini-excavators
LRS-15
- RIP mini - ripper shank for mini-excavator
Ripper-10
- MR mini - multi-ripper for mini-excavator
MRF 75 · 2 width variants, MRF 140 · 2 width variants
- AC mini - asphalt cutter for mini-excavator
AC-10
Standard mini-ex buckets set No. 1
- GP - general purpose digging bucket
GP-95 · 6 width variants
- GB - rigid grading & ditching bucket, German profile
GB-90 · 3 width variants
- GBH - hydraulic tilt ditching bucket for mini-excavator
GBH-90 · 3 width variants
- RGP - skeleton rod GP bucket
RGP-95
- SGP - heavy duty skeleton GP bucket
SGP-95
- GPO - GP bucket with perforated bottom
GPO-95 · 2 width variants
Standard mini-ex buckets set No. 2
- GPL - general purpose digging bucket
GPL-75 · 6 width variants, GPL-95 · 6 width variants
- GBP - rigid grading & ditching bucket, Italian profile
GBP-75 · 4 width variants, GBP-95 · 3 width variants
- GBPH - hydraulic tilting grading & ditching bucket
GBPH-75 · 4 width variants, GBPH-95 · 3 width variants
- RGPL - skeleton rod GPL bucket
RGPL-75, RGPL-95
- GPLO - GPL bucket with perforated bottom
GPLO-75 · 3 width variants, GPLO-95 · 2 width variants
- SGPL - heavy duty skeleton GPL bucket for mini-excavator
SGPL-75, SGPL-95
Dutch mini-ex buckets set No. 3
- BDP mini - clay digging bucket for mini-excavator
BDP-90 · 2 width variants
- SB mini - Dutch profile grading & ditching bucket for mini-excavator
SB-75 · 5 width variants, SB-90 · 5 width variants
- PDP mini - skeleton BDP stone bucket
PDP-75 · 3 width variants, PDP-90 · 3 width variants
Nordic mini-ex buckets set No. 4
- DS mini - Scandinavian deep digging bucket for mini-excavator
DS-90 · 4 width variants
- PS mini - Scandinavian universal grading bucket for mini-excavator
PS-80 · 5 width variants
- PSH mini - hydraulic swivelling grading bucket for mini-excavators
PS-80 · 5 width variants
- KS mini - cable bucket for mini-excavator
KS-100 · 3 width variants
- KSV mini - Scandinavian profile cable V bucket for mini-excavator
KSV-100 · 3 width variants
- QC-S - S-System Scandinavian quick-coupler
QC-S45-H, QC-S50, QC-S45-SA, QC-U-S45-H, QC-U-S50
- CW - CW-System compatible quick-coupler
CW-10, CW-20, CW-20 S, CW-U-10, CW-U-20, CW-U-20 S
- QC-HS / QC-MS - MS-System compatible quick-coupler
QC-HS-08, QC-MS-08, QC-U-HS-08
- QC-PG - pin-grabber quick-coupler for factory brackets
QC-PG-50, QC-PG-55, QC-PG-60, QC-ML-M-45, QC-U-PG-50, QC-U-PG-55, QC-U-PG-60
Bucket sets for this machine
Sets of one bucket profile that include buckets listed for the Mecalac 8MCR. Each set lists the buckets that match the machine's operating weight.
- German-profile set
Buckets in the set for this weight: GP, GB, GBH
- Italian-profile set
Buckets in the set for this weight: GPL, GBP, GBPH
- Nordic-profile set
Buckets in the set for this weight: DS, PS, PSH, KS, KSV
- Dutch-profile set
Buckets in the set for this weight: BDP, SB, PDP
Mecalac 8MCR: machine data
- Operating weight
- 7,200 – 7,600 kg
- Engine power
- 55.4 kW
- Maximum digging depth
- 3,700 mm
- Maximum dump height
- 3,571 mm
- Tail swing radius
- 1,254 mm
- Quick coupler
- CONNECT coupling system
- Auxiliary circuit flow
- 90 l/min
- Auxiliary circuit pressure
- 280 bar
As published by Mecalac, retrieved 2026-09-17. Source
Before you order: check the interface
The weight class of the Mecalac 8MCR sizes the attachment. It does not tell you the pin diameter, the pin spacing or the stick width, and those decide whether an attachment fits. Measure them on the machine, or send us the measurements of the bucket it runs today.
A midi excavator is often the main machine on a site, trenching, loading and grading in the same day. Buyers usually start with a general purpose bucket, a grading bucket and a quick coupler, then add other tools when the work calls for them.
Quick coupler brackets at this weight
In our model tables, the attachments listed for the Mecalac 8MCR at its weight are built with these brackets. Each code opens the models that list it.
- Measure the diameter of both bucket pins.
- Measure the distance between the pin centres.
- Measure the inside width between the stick ears.
- If the machine runs a quick coupler, note its make and type.
What these terms mean:
How to choose an attachment for the job:
Other Mecalac models of a similar weight
Other makes of a similar weight
Operating weight within 2 t of the Mecalac 8MCR.
Other Mecalac models with the same coupler brackets
Our model tables give these machines the same quick coupler brackets.
Why buy from the factory
- Cutting, machining, welding and painting on one site, our own factory in Poland, EU
- More than 50,000 attachments delivered since 2008
- A record for every serial number, so the spare parts match your attachment
Need Custom Specifications?
We can manufacture attachments to your exact pin spacing and requirements for Mecalac 8MCR.
Welded to EN ISO 3834-2. Agree it as a standing term of supply and the EN 10204 3.1 certificate ships with every attachment. You also get the CE declaration of conformity for every product that carries the CE mark.
Do you sell Mecalac machines? Machine dealer supply
Machine makes and model names belong to their owners. Sieruta is not affiliated with them. We use the names only to show which machines we offer attachments for, by operating weight.